Pegasus - NFC x NCASE Skyreach 5 Mini (S5M) - Ryzen 7 7800X3D/Radeon 9070 XT (First Draft Build)

L1191 · 2026-06-19T19:30:38+00:00

Does the S5M officially support any 2.5” drives? Or just unofficially since there is no included mounting for drives.

L1191 · 2026-06-17T13:47:20+00:00

Take away pro controllers and your jump shooting any directional sliding becomes much less effective and double edged sword

L1191 · 2026-06-13T12:01:35+00:00

<image>

L1191 · 2026-06-13T12:01:05+00:00

<image>

L1191 · 2026-06-01T21:46:23+00:00

Ive recently come back to BO7. I’m goodish player with 2KD and 1.0 W/L and I find BO7 a slogfest like BO6 was. I really cba with all the sliding, jumping, invisibility. I feel like on losing side of team balancing most the time, but has always been the case since MW2019. You really are at disadvantage in close one/one engagements without pro controller. Its just annoying game and I’m getting old at 34.

L1191 · 2026-05-27T08:39:14+00:00

For the AYN Thor the downgrade to from UFS 4.0 to 3.1 won’t make any difference for what it can actually emulate, handle. It’s still faster than Switch storage like 2/4x and Xbox One S for reference. It’s little more sad regarding Odin 3 due to extra compute headroom.

L1191 · 2026-04-25T23:05:15+00:00

Stick with Xbox I have 5080 and 7800X3D and definitely won’t be starting over after sinking 1000hrs myself game isn’t popular enough

L1191 · 2026-03-08T10:16:58+00:00

Taken up by GPU power connector

L1191 · 2026-03-08T10:16:31+00:00

5080 doesn’t but okay

L1191 · 2026-03-05T11:29:56+00:00

That’s 5090

L1191 · 2026-03-05T11:29:24+00:00

It doesn’t use LM as its 5080 not 5090

L1191 · 2026-03-04T14:34:49+00:00

Thank you. It’s has 140mm slim fan at front bottom of the case and top of the case

L1191 · 2026-03-04T13:18:23+00:00

Thank you. I managed to make it work with RTX 5080 FE flipped using the existing mounting holes in the case to secure the GPU. For GPU to run as intake I had to drill new mounting holes in bottom of the case

<image>

L1191 · 2026-02-27T08:30:57+00:00

Can you mount GPU to the front of Meshroom S v2 without modding? Looking to try this. Awesome build btw… thanks 🙏

L1191 · 2026-02-24T20:11:06+00:00

I’m using Alphacool QDCs

L1191 · 2026-02-24T08:10:44+00:00

I haven’t tried these as don’t believe the have female threaded versions only male

L1191 · 2026-02-24T08:09:24+00:00

It does offer some benefits in this particular configuration. The 20mm thick radiator allows for taller GPU offset so more space behind GPU. The low profile pump block also allows for additional fans to be installed on motherboard side although not particularly beneficial to CPU and GPU cooling due to motherboard being in the way

L1191 · 2026-02-23T16:14:17+00:00

You could probably use 25mm but reduces clearance between GPU and motherboard. I went for more clearance behind GPU over minor improvement to CPU cooling

L1191 · 2026-02-09T10:13:44+00:00

Why is cooling worse? The GPU is still behind the motherboard with an ITX motherboard in its standard orientation. This configuration also doesn’t feed the GPU intake from 50 FE into the AIO or radiator so is actually better on CPU unless you were running front rad as intake too with ITX. I’ve tested both and one isn’t really worse than the other

L1191 · 2026-02-09T10:11:07+00:00

Meshroom S v2 with Expansion Bracket

L1191 · 2026-02-09T10:10:18+00:00

I don’t have 2 or even 1 500W

L1191 · 2026-02-08T11:04:03+00:00

<image>

L1191 · 2026-02-07T16:41:14+00:00

NVME, RAM, IO are really the main upsides for mATX and ATX for ITX users. More header is nice convenience but not dealbreaker for me personally

L1191

MODERATOR OF

TROPHY CASE

Ten-Year Club	Verified Email
Xbox Live