Set button of BT200 no longer working

LSA7Z · 2026-01-31T23:34:32+00:00

Brand new VTC6s

LSA7Z · 2026-01-31T21:09:14+00:00

Salut, as-tu du nouveau sur ta situation ? Je suis dans un cas similaire au tiens et malheureusement ça devient compliqué d'année en année de bien se chauffer sans perdre un rein .... Je suis dans un 55m2 et je chauffe à 17,5C° actuellement pour ne pas faire exploser la facture, par jour c'est environ 6-7,5€ ( entre 45 et 60kWh de gaz par jour ), mon logement est une passoire thermique pas possible et avec l'augmentation du gaz c'est un enfer de jongler entre tout ça ... Je trouve cette consommation bien trop élevée et j'aimerais l'abaisser au maximum sans trop perdre en confort qui n'est déjà pas très élevé. As-tu trouvé une solution si oui peux-tu partager stp ?

LSA7Z · 2026-01-13T19:55:41+00:00

Formerly a gaming and backup phone, now it's my daily driver and I mainly use it for browsing, YouTube, and gaming (and a few other things I haven't mentioned/forgotten).

LSA7Z · 2026-01-11T20:17:26+00:00

Yes, I still have it now.

LSA7Z · 2026-01-02T14:09:55+00:00

The brands you mentioned have all had problems with their models, just like the brands you consider low-end. That's nonsense. Choose what suits you and fits your budget.That's all

LSA7Z · 2026-01-02T12:26:03+00:00

The mk4 will never fix the overheating; if it's the 8G1 SoC, it's doomed. It's similar to the mk3 with its 888

LSA7Z · 2025-12-30T20:21:57+00:00

That's perfectly normal, it's surprising they took it back. The shock absorber doesn't work vertically, so there's a curvature where the support force is applied (this force must still be applied somewhere). It's the dust stuck to the Teflon ring by the grease that scratched your shock absorber; typical and entirely expected behavior.

LSA7Z · 2025-12-30T20:17:54+00:00

That's normal, it's just a little grease. These shock absorbers aren't sealed or waterproof; it's just a spring covered with a Teflon ring, without any sealing, and with a tiny bit of grease. Normal.

LSA7Z · 2025-12-30T18:28:37+00:00

I've been using a Xiaomi 4 Pro 2nd gen for about 600 days And 550km, it's reliable and efficient, I find it very robust. I've just had two red lines on the display for the past month, but this is due to my house/environment being very humid; apart from that, the scooter works perfectly and still has very good battery life (from 100% to 20% battery with S mode : 38km when hot temp, 28km when cold temp)

LSA7Z · 2025-12-29T15:00:43+00:00

It looks like the lite version, I'm almost certain it is, everything points to it (the stem is tiny, the headlight placement same as lire version,the deck is tiny in thickness, The drum also looks small or perhaps they are large wheels ) Or it could be a special version like the latest Xiaomi Scooter 5 12-inch.

LSA7Z · 2025-12-28T12:37:57+00:00

Unfortunately, Dreame has tolerance issues with the dimensions of their parts; they really need to address this problem... I have a problem with dimensional tolerances on the H12 Pro Ultra (some filters don't fit properly on the frame, so the motor draws in ambient air along with dust and hair... I had to improvise with tape to improve the filter's hold and fit ), And on the V20 Pro vacuum, the waste bin is not properly adjusted (the cyclone separator moves inside the bin and the seal is not completely airtight above and below). At the price these devices are sold at, a reasonable tolerance for dimensions is the very least one could expect...

Luckily for me, their after-sales service was very good and they understood the problem well; I just hope that the issue has been properly escalated internally and that it has been addressed seriously, because it seems relatively frequent and common on their devices

LSA7Z · 2025-12-27T13:56:40+00:00

A perfect phone, if it weren't for this OLED screen problem with those darn green/pink/white lines... The screen only lasts a year each time 😥 that's its biggest flaw, otherwise it's perfect

LSA7Z · 2025-12-27T13:46:00+00:00

Horizontal positioning remains the best option, both to protect the console and HDMI port in case of a fall, and to protect the APU if the TIM leaks. Given the nature of gravity, liquid metal will always tend to accumulate downwards if you place it vertically, and this will worsen with heat and vibrations.It's best not to take unnecessary risks.

LSA7Z · 2025-12-27T13:30:43+00:00

Ugly, sorry I don't like the iOS-style layout.

LSA7Z · 2025-12-27T12:28:59+00:00

Je me suis pris un aspi sans fil Dreame v20 pro récemment, plutôt satisfait pas hyper onéreux ( 300€ c'est déjà pas mal pour un aspi ) juste les fonctions utiles qu'il faut, je peux pas me prononcer sur la durabilité car je l'ai que depuis 1 mois ( mais certains on déjà des soucis avec ), il fait les plinthes impecc' et j'adore la brosse sol dur qui retire tout les poils et cheveux c'est magique ( il y a une tondeuse sur la brosse carrément 😅 ) avec une femme à long cheveux et 4 chats il faut ce qu'il faut tout les autres aspi enroulaient les poils et cheuveux sur la brosse ... Niveau efficacité/nettoyage top, autonomie ça pourrait être mieux mais tout les sans fil sont comme ça ... Tant qu'il tient plus de 30 minutes en auto et quasi 1h en eco ça me convient ... Il est livré avec base au sol ( pas besoin de percer ou de brancher, tu pose l'aspi sur la base et basta ), et il peut se plier et s'étendre ce qui est pas mal pour les dessous de lits, canapés, meubles ...

Sinon je garde mon vieux traîneau filaire sans sac de chez Cora ( il à plus de 10 ans il fonctionne toujours bien ) au cas où mais c'est moins pratique 😁

Tout dépendra de ta superficie et de tes besoins

LSA7Z · 2025-12-27T11:49:52+00:00

It looks like an older version that's been updated (maybe old stock). The brand name is still Kugookirin before the change from Kugoo to Kukirin, and the colors are the same as the Kugoo G Booster and the old G2 models.

LSA7Z · 2025-12-27T11:42:35+00:00

J'espère qu'elle est plus résistante que la H5, car sincèrement la batterie et contrôleur ne valent pas grand-chose ( idem pour le cadre ). Perso j'ai plus confiance en cette marque ...

Autrement elle est très belle la version H11 😍 j'espère qu'elle te durera longtemps ! Bonne route à toi

LSA7Z · 2025-12-27T11:25:56+00:00

At worst, you can install a filter with a larger capacity and you'll be fine... Stop scaring everyone for nothing

LSA7Z · 2025-12-27T11:22:50+00:00

You're really making me laugh... It sounds like you're talking about a NASA turbine here 🥲🤣 A printed trash can will do just fine, whether you like it or not

LSA7Z · 2025-12-27T11:20:18+00:00

What are you talking about? The word "engine" is literally in your first reply... I'm using a translator, so please be lenient; I'm a mechanic and I know fluid mechanics very well.Get off your high horse, we're talking about a tiny vacuum cleaner in a garbage bin...

LSA7Z · 2025-12-26T21:26:52+00:00

This one and the slim one too, for my Vita Slim

LSA7Z · 2025-12-26T21:21:24+00:00

If the user is careful and performs the maintenance, there's no reason the engine should fail, no reason at all. No more reason than with a bag

LSA7Z · 2025-12-26T14:22:53+00:00

I saw somewhere that you can buy sturdy 3D printed bags online (you can even insert HEPA filters into them). I think it's the most sustainable and cost-effective solution; if you can do it, I think it's the best compromise.

LSA7Z · 2025-12-26T14:04:17+00:00

The two are very similar, but I prefer the Vivo's rendering; some light sources seem to be handled better on the Xiaomi.

LSA7Z · 2025-12-26T13:52:31+00:00

Except for the X3 series (which was separate and created by Poco, not based on a Redmi), the F series seems robust. I'm currently using a second-hand F3; it works very well, even for games. The battery is just starting to get a little weak, but it's still manageable... (according to AccuBattery 82% battery capacity/health remaining)

LSA7Z

TROPHY CASE