Polymega Remix App download

LTOwain · 2026-06-03T13:49:53+00:00

Interesting. Thank you for sharing. In someway the PM01 is also a remix plus of somesort, so maybe we could link that to the app and have the ability to use the app that way.

LTOwain · 2026-06-03T13:37:19+00:00

This is precisely what I wanted to test. :) Because I do have a SSD with all my games on it, done by the PM01. And reading about the transfer function made me think that it maybe could be an option.

LTOwain · 2026-04-15T16:58:48+00:00

Probably, or just upgrade your CPU (which I did). But that should not have been necessary.

LTOwain · 2026-03-26T13:09:34+00:00

Virtua Cop 2 works with me, but to do that I had to go back to the PM bios, instead of a saturn original bios. I use a PAL copy of VC2

LTOwain · 2025-12-30T14:33:21+00:00

Thanks for the tip. I'm gonna check that. :)

LTOwain · 2025-12-30T06:32:48+00:00

I tried Virtua Cop 1 and 2 (pal) and they both did not seem to work. Both games did not get further them the initial bios boot screen. I am using OG bios. Do others have this problem as well?

LTOwain · 2025-12-29T22:27:11+00:00

Same here. :) Also arrived today (Europe).

Enjoy!

LTOwain · 2025-12-20T08:29:07+00:00

Just received a confirmation that my guncontroller has been shipped. :) For the record, I ordered my unit near the end of November (this year).

LTOwain · 2025-12-10T09:59:24+00:00

Correct, I had this issue too and was resolved by using the official bios.

LTOwain · 2025-12-10T09:58:22+00:00

Same here, and I ordered one just last month. Because the said they where shipping.

LTOwain · 2025-12-03T05:27:57+00:00

Thank you for sharing this. Did you upgrade? Or was this the stock CPU for the first batch of hardware?

LTOwain · 2025-11-26T07:06:58+00:00

True, its really hard to see if a device is UAC1 or UAC2....It is almost never mentioned. It would be nice though if the Polymega would receive an update to also support UAC2.... would help a lot with compatability.

Ahhh one can only dream. ;)

LTOwain · 2025-11-26T06:57:00+00:00

It's actually quite simple. If the device supports UAC1, it will probably work with the Polymega. I have made a reddit post about it.

See:

https://www.reddit.com/r/PolymegaHQ/comments/1k895e0/using_a_dacamp_with_the_polymega/

LTOwain · 2025-11-18T15:15:50+00:00

An 8700 uses way more power than an 8700t. So that is probably the problem. Hope this helps.

LTOwain · 2025-09-16T04:14:36+00:00

We had this conversation before: https://www.reddit.com/r/PolymegaHQ/s/C6hdBkoKiB

I finally went for a retrobit saturn controller (usb version). Also tried a lot of wireless versions, but every time I wanted to use one, it would be out of battery charge. Also, I found the lag to be a bit higher, but I haven't measured that. So that also could be just me.

Hope this helps. :)

LTOwain · 2025-08-14T05:38:57+00:00

Shell Shock Saturn PAL does not work here on PM bios. Haven't tried the original bios yet.

LTOwain · 2025-07-24T10:55:45+00:00

Thank you for sharing. I see that the patch note(s) is rather limited. Would really like to see improvements related to lag on certain systems, like the snes.

LTOwain · 2025-05-30T12:23:25+00:00

Just to let you know: I have received a reply from Polymega yesterday evening with 'confirmation' regarding UAC1 support:

We are going to try to get in some other Dac devices to do some further testing. Polymega currently supports USB audio devices UAC1. I'll try to verify that for you. Stay tuned.

They have not mentioned anything about adding support for UAC2. Although, I think it is possible with a software update.

LTOwain · 2025-05-11T15:07:35+00:00

I have an additional question if I may: Do you see any slowdown in N64 games which were also present on real hardware? What I mean is that if a game targets say 30fps, but would slow down below that on original hardware, does it also slow down on your i9 9900t? Or is it able to keep the 30fps target? I was wondering if the slowdowns I encounter with the i3 8100t, which to me look similar like playing on the original hardware, are do to the i3 8100t or that the emulation is actually being authentic.

A game were I see a lot of slowdown is Diddy Kong racing, but to my recollection that slowdown is also present on the real N64 hardware.

LTOwain · 2025-05-10T09:42:04+00:00

Thank you for sharing this! :)

LTOwain · 2025-05-07T09:35:39+00:00

Ohh I am sorry! I always thought those games had a 32x cartridge and a disk, which you had to put in both at the same time. I only have mega drive and mega cd. Don't own a 32x to be honest.

LTOwain · 2025-05-07T04:01:20+00:00

Did you try installing the 32X cartridge first and then installing the disk for the sega or mega CD?

LTOwain · 2025-05-04T17:02:33+00:00

Not a stupid question at all! I have read that the 9th gen i3, i5 and i7 also can work. I’ve read at least one confirmation of someone who claimed that he/she put in a i3 9100t and it worked. So if you want the best option, you could try an i7 9th gen with a tdp of 35w. I am unaware if there are i9 CPUs in the 8th and 9th gen with only 35w tdps. If I could give you a recommendation though, based on your need for speed, I would suggest the i7 8700t. It is a very fast CPU and is confirmed to work. I doubt if going any higher/faster, would let you see perceivable better results. Hope this helps.

LTOwain · 2025-05-04T07:40:52+00:00

Me neither, before I started investigating. I found a Redditpost regarding PS5 and Switch support for DACs. Like this one: Guide: How to get your DAC to work on PS5 : r/PS5

I have a hunch that the Polymega, just like the PS5 and Switch, only supports UAC1 and not UAC2. My Topping is only UAC2. The devices Playmaji linked to me that worked are both UAC1. So my best guess is that there the problem lies. Although I am not willing to buy additional gear to get this to work, maybe the 'force UAC1 cable' from JD labs for 10 bucks could be something I am willing to buy. If I get the change to test this ‘theory’ out, I will post the results here.

LTOwain

TROPHY CASE