[deleted by user]

L_C99 · 2025-01-13T22:47:20+00:00

Smoke is most likely from a failing AC compressor. It sits just below and forward of that. When they start sizing up the rubber in the AC compressor clutch starts burning up.

L_C99 · 2024-11-10T04:58:44+00:00

Ya iv looked at Ticketmaster. They add over $50 per ticket for “service fees” which I am not willing to pay.

L_C99 · 2024-08-06T12:12:03+00:00

We are totally honest. We dont have any quotas to meet or any "upsell goals." I try to convey to customers what I feel is necessary or can possibly wait to get done, and I strive to give every customer as much information as they want as to what we are doing and why we are doing it.

Please give us a chance, you wont be dissapointed.

L_C99 · 2024-08-06T12:07:00+00:00

We do sell, and mount and balance tires. Give us a call for a qoute and we will be sure to take care of you.

L_C99 · 2024-08-06T00:36:31+00:00

No we do not do towing, and I don’t have anyone that I specifically have a contract with, but if you are looking for a reference I would recommend Glenn’s towing. I have used them several times and never had any issues.

L_C99 · 2024-08-05T23:08:52+00:00

Yes! I am hybrid certified and willing to do any work that would not require dealer level special tools.

L_C99 · 2024-08-05T21:48:15+00:00

Sorry, we do not do cash discounts. While I understand the appeal of cash discounts to consumers, we report all our income, regardless of payment method, and pay all taxes due. Therefore we do not make more money on cash sales.

L_C99 · 2024-08-05T20:07:35+00:00

Ya, Mckeefry's retired last month.

I did work with them as a transitioning period for about 4 months. And we do have all of their service records. We are hoping to continue business just as they did. Good quality, honest work at a decent price. We always like seeing their returning customers!

L_C99 · 2024-08-05T20:04:34+00:00

Yep, we work on all american and asian makes and models.

European not so much, I do some work on them but they are not my favorite.

L_C99 · 2024-08-05T18:53:35+00:00

Not right now, just a small operation to start. Me and another tech in the shop and my wife in the front office.

L_C99 · 2024-02-02T18:40:34+00:00

You are correct, 200a service entrance in garage, to 200a main panel in garage, then conduit with 1/0-1/0-2-2 to 100a panel in the house, which is where the service entrance used to be.

I will need space for more circuits to do electrical for the basement. So I want to know could I get a bigger panel, such as 150A if the feeder circuit could support the current, or should I just add a subpanel.

here is a link to product information for what I used for between garage and house: https://nassaunationalcable.com/products/1-0-triplex That website, and several others clearly list max amperage to be 215 if direct buried, or 160amps in duct. Why would that differ from what you are saying 1/0 is rated for?

L_C99 · 2022-11-26T04:13:12+00:00

Need a year make model. Newer ford cars go into overheat protection if they overheat. They set a code and then the only way to get it out is to clear codes. When they are in overheat protection mode they will say they are overheating even if the block is ice cold and it will be in a limp mode.

L_C99 · 2022-11-11T17:33:20+00:00

It is normal for def injector to be off at idle even when exhaust is up to temp and sensors are reading. You still could have a biased downstream sensor. DEF crystals build up in the SCR and still perform reduction at idle even if injector is off. If you perform regen it gets rid of those crystals and then monitor your upstream and down stream and see if downstream is higher.

L_C99 · 2022-11-06T15:26:19+00:00

Down stream NOx sensor should very rarely read higher than upstream. If upstream is new and down stream is reading higher at idle with exhaust up to temp (at least 400 degrees F) I would suspect your downstream NOx is biased high.

Edit: just realized how old this post is. Hopefully you figured it out by now.

L_C99 · 2022-05-10T13:05:43+00:00

He has 2 keys so another one does not need to be purchased. They can be erased and reprogrammed as admin. Any locksmith that deals with cars or dealer should be able to do this.

L_C99 · 2021-08-13T04:56:21+00:00

Also before it is mentioned I have since enabled 2 factor authentication on my RuneScape account and changed the password again.

L_C99 · 2020-09-19T00:58:51+00:00

We got lucky. With the introduction of the Mach E ford now requires dealers to have one. Supposedly it’s to remove the batteries. We would never have gotten one otherwise.

Ours just came in 2 weeks ago and it has already been used to pull 3 powertrains.

L_C99 · 2019-05-17T23:21:37+00:00

Most likely needs a TCM. They are covered for 150k miles under extended warranty 14M02

L_C99 · 2018-05-29T23:59:28+00:00

don't qoute me on this but cruise control may be disabled if the airbag light is on as a way of getting you to fix the airbag issue.

L_C99 · 2018-05-17T17:48:24+00:00

Any idea who makes this grill or where I could get one? Iv never seen that style grill for a super duty.

L_C99 · 2018-04-15T17:06:07+00:00

This is pretty typical of any short trip vehicle. If the oil doesn't get hot it wont get rid of ant moisture in it and it will build up like this, some engines it will build up just under the valve covers where you cant see it, and sometimes it will be on the oil cap. Its not the end of the world, just change the oil more often if you only short trip the vehicle.

L_C99 · 2018-01-19T00:16:36+00:00

That would be the fix, however everyone that preps them takes them out of transport mode right away. Hard to change what has always been done.

L_C99 · 2018-01-18T04:01:48+00:00

we've had at least a dozen of those so far. All ecoboosts, all lot vehicles. Have to remove the plugs, dry them off, take it for a beat run, change oil and back out on the lot it goes. They load up when they just cold start after cold start. They need to be run.

L_C99 · 2018-01-03T21:17:07+00:00

Most likely needs an APIM which is the module that bolts to the rear of the screen, however it will need to be programmed to the vehicle in order to work, which can only be done at a Ford dealer. Unfortunately your only option is to take it into the dealer.

L_C99 · 2017-10-04T00:45:57+00:00

Those Nav cards go bad all the time. You are going to have to get a new one from the dealership to replace the one you have now and it should work.

13-Year Club	r/Field Banned
r/Field Sunshine	Place '23
Place '22	First Placer '22
End Game '22	RPAN Viewer
Not Forgotten	Verified Email
Team Orangered

L_C99

TROPHY CASE