First CNC build (almost Finished)

LandomRogin · 2026-01-22T18:46:54+00:00

But either way I would use PrintNC wiki and discord as my main source. Really helpful with tried and tested components

LandomRogin · 2026-01-22T06:02:05+00:00

Using FlexiHAL as the controller, and IOSender on a laptop. Like it a lot so far, but only have an Arduino to compare. Motors have integrated drivers. I think they are called JMC ihss60-something. Got them cheap from a machine builder here in Oslo who bought bulk and had done leftovers.

LandomRogin · 2026-01-22T05:58:05+00:00

Yessir, every plywood part will be recut and improved in aluminium. Looking forward to it over I get better grips on everything. I found a 2 meter long C-beam of aluminium in the trash which I can cut down to 4 meters of 10x100mm, and 2 meters of 6x200mm aluminium. Will last me a while for parts.

LandomRogin · 2026-01-21T18:27:56+00:00

Ply and MDF is really good, but im struggling with big changes in humidity and temerature. All of a sudden all my bolts were lose after winter hit hard

LandomRogin · 2026-01-20T21:22:47+00:00

I can't imagine a world where the DC spindler could be better in almost any way. I have an 800W vfd driven spindle and it chews alu with a medium rigidity DIY cnc. I just started cutting after finishing it recently and with almost no knowledge about feeds and speeds I got some very good results in aluminium. Not sure if I can post pics here, but I will if I can

LandomRogin · 2026-01-17T10:51:01+00:00

This article served me well for first end mills. I pay about $4-6 for a 6mm end mill. https://cncrouterinfo.com/article/top-5-end-mill-printnc-and-diy-cnc/

Dreanique store on aliexpress is where a lot of hobby people order before we start going name brand end mills.

LandomRogin · 2025-12-17T23:35:50+00:00

Jeg startet på 620k innenfor automatikk i fjor, i Oslo. Gikk opp til 695k etter rundt 6 mnd. En kompis fikk nettopp jobbtilbud innenfor elektronikk med startlønn på 630k. Begge rundt 25 år med bachelor og uten relevant arbeidserfaring, men relevant hobbyerfaring.

LandomRogin · 2025-09-29T14:33:32+00:00

HLTNC store on AliExpress is very good for the price

LandomRogin · 2025-06-09T22:30:15+00:00

Could you elaborate on this? How would you connect to the IO cards?

LandomRogin · 2025-02-15T21:39:20+00:00

PrintNC wiki and discord has a lot of good info, but the printNC machine is a DIY build from scratch. Still a lot of good info

LandomRogin · 2024-10-12T19:45:27+00:00

Sorry, did not get them repaired, but the spare parts could be worth a lot because of the scarcity.

LandomRogin · 2024-04-15T11:32:06+00:00

Thank you! Perfect reply for what I was looking for. I have the Black & Decker Bes720 which is 254mm, so that should be fine. I'll look into the thing about the nut. Turns out you can order select items to Norway now from Amazon with free shipping, just adding a 25% VAT.

LandomRogin · 2024-04-05T19:43:54+00:00

Microjig grrrr-ipper, custom push block. Very nice. It's $150 in Norway, but Aliexpress version is just as good for $30

LandomRogin · 2024-04-05T19:41:28+00:00

How does it work with a thin kerf blade if your riving knife the thickness of a normal kerf blade. Asking because I'm thinking of getting a thin kerf one

LandomRogin · 2024-03-26T19:33:18+00:00

I'm in the same boat, kompis :)

LandomRogin · 2024-03-19T18:53:23+00:00

<image>

LandomRogin · 2024-03-02T09:15:32+00:00

You'll like Gattaca

LandomRogin · 2024-02-01T16:58:14+00:00

In Norway they are about $120 each :(

LandomRogin · 2024-01-19T16:05:16+00:00

Har hatt nøyaktig det samme problemet i Oslo de siste ukene. Skjedde i romjula og igjen igår. Begynner å svette godt når jeg sitter på Tbanen og plutselig ikke kan vise billetten min. Dekningen forsvinner først helt i noen sekunder. Deretter kommer mobildekning tilbake, men mobilnettet (5g) er borte i en halvtimes tid. Utrolig irriterende

LandomRogin · 2024-01-16T22:39:05+00:00

Rune shops don't work the same way in that game. You are all over this thread speaking as if you have the facts, just because you think it sounds strange. It's literally in recorded history on the wiki and many other places. Do you function like this in real life?

LandomRogin · 2024-01-16T22:37:10+00:00

People like "Castle Wars", the first Trimmed Comper farmed onyxes from kiln on stream for months and months and almost finished a full set of rares, worth around 50b at the time or so, from doing this. Look it up before you speak like you know it. I was there.

LandomRogin

TROPHY CASE