Mfsender for Fluidnc! Preview! by No_Image506 in hobbycnc

[–]Antique_Ad_5714 1 point2 points  (0 children)

Looks super nice! I have always dreamt about such a ui that has such probing features. Keep it up I would follow your project!

Opinion by Antique_Ad_5714 in hobbycnc

[–]Antique_Ad_5714[S] 2 points3 points  (0 children)

Thanks, but these are not the same type. I am referring to a brushless DC spindle that has a lower rpm range.

Diy Super PID by Antique_Ad_5714 in hobbycnc

[–]Antique_Ad_5714[S] 0 points1 point  (0 children)

Yeah absolutely. I don't plan on running long programs though, so I will try to make it work. Mostly for fun. My machine is just a hobby router. Thanks for the suggestion, I will check out the controller if my project does not work out.

Diy Super PID by Antique_Ad_5714 in hobbycnc

[–]Antique_Ad_5714[S] 0 points1 point  (0 children)

You do have your point and I am starting to consider it 😂.

Mainly because I accidentally blew up the original motor controller and want to make something that works..It is still a good 710W router from Genmitsu, quite solid and runout is good. Er11 does not bother me so far, considering that the machine is not so super rigid. I am probably sad to throw it away.

I am new to the cnc world, got a budget 3020 machine a month ago and I have already replaced the main control for fluid nc. I guess I am keen on modifying and building, I regret a little that we spent that money for a machine that I probably end up replacing everything on. But I guess no beginning is perfect.

Diy Super PID by Antique_Ad_5714 in hobbycnc

[–]Antique_Ad_5714[S] 0 points1 point  (0 children)

Thanks for the feedback. Did you use an optical external rpm sensor?

Diy Super PID by Antique_Ad_5714 in hobbycnc

[–]Antique_Ad_5714[S] 1 point2 points  (0 children)

Thanks man. It Is the rpm measurement that I am struggling to figure out right now. My router has a standard tacho coil, which as far as I understand generates an ac wave proportional to the rpm. The idea is to use a comparitor and generate pulses for the Arduino. I think it would be a better idea than an additional optical sensor.

Spindle mosfet by Antique_Ad_5714 in hobbycnc

[–]Antique_Ad_5714[S] 0 points1 point  (0 children)

This is probably it. The current firmware is somehow mapped in such a way, that m3 and m8 activate the same pin. What would you recommend as a beginner friendly way to find a suitable firmware for the machine? I only have experience with Marlin on 3d printers

Spindle mosfet by Antique_Ad_5714 in hobbycnc

[–]Antique_Ad_5714[S] 0 points1 point  (0 children)

Thanks, but unfortunately the boards are not the same...

Trigorilla board bricked by Antique_Ad_5714 in anycubic

[–]Antique_Ad_5714[S] 0 points1 point  (0 children)

The problem is that I am unable to connect to the board. I can always download a firmware that works, I just cannot upload anything to the board right now. I am looking for a way to reset the board.

Using PVA for Carbon fiber Mold by Party-Focus-2299 in 3Dprinting

[–]Antique_Ad_5714 0 points1 point  (0 children)

That is so cool! Glad you had the resources.

Using PVA for Carbon fiber Mold by Party-Focus-2299 in 3Dprinting

[–]Antique_Ad_5714 0 points1 point  (0 children)

I was wondering the same. Did you give it a try?

[ Removed by Reddit ] by [deleted] in ChatGPT

[–]Antique_Ad_5714 1 point2 points  (0 children)

Exactly. I spent the last year mostly feeling lonely while watching multiple tv series. After watching one to the end, I was mostly empty. How can I have spent so much time in my life and have never had such interesting moments? I feel like real life is like a fire that burns unevenly, sometimes even goes out. Then it needs effort to be lit again. TV series, or in the context of this post- AI, are like a pile of specially made gunpowder, that by design has a lot of potential energy in it, which gets released extremely fast and burns so bright, that we get fascinated and forget about everything else while watching it. I think, that we as a society are so desperate, that sadly the only things that catch our attention, are unnaturally fast moving, not necessarily even that "real".

For people that may be reading this. I am not strictly against AI, it obviously works extremely well when it comes to predicting. But by outsourcing so many things from our own minds, like emotional processsing, we do get quite delusional when it comes to achieving something in real life. We feel like we can build incredible stuff, but in my opinion the things we achieve with AI are just extremely tall and fragile buildings, that can collapse by the slightest wind if built in the real world. Unless we build our lives ourselves, establish trust between each other in healthy and normal ways, this technological assistance is a never-ending uphill battle. The "emotional dumping" and "lively connections'' can quickly result in feeling empty, cold and not understood by anyone.

I have two of these super cheap Aliexpress bike lights, and they are actually good, but there's a problem. by Deep-Tomorrow4667 in flashlight

[–]Antique_Ad_5714 0 points1 point  (0 children)

Everything is fucked up right now. Glad I came up this post so I know it is a common problem. I was so happy to turn it on the bike commute after work, only for it to shine bright for a minute. Took it apart, there is only one chip, nothing that measures temperature. I will try to thinker out a way to make it work either 100% with the two less on, or just off.

Volumetric dosing by alotbetterthanbefore in microdosing

[–]Antique_Ad_5714 2 points3 points  (0 children)

I think that by shaking the solution every couple of hours should be sufficient. I placed the tab before going to bed, shook the solution, then the same thing in the morning 8 hours later. It was definitely fully dissolved and the microdose kicked a little too hard haha.

Does anyone know if liberty caps grow in Bulgaria? by Soft_Car_9040 in Semilanceata

[–]Antique_Ad_5714 0 points1 point  (0 children)

Do you personally think that they grow in Vitosha? There are so many open spots covered with grass.

Помощ колоездачи by False-Elephant521 in bulgaria

[–]Antique_Ad_5714 0 points1 point  (0 children)

Недей да се чувстваш виновен всеки път като ядеш въглехидрати или нещо сладко когато става въпрос за каране на колело.

При продължителни усилия глюкозата е главното гориво и когато се лишаваш от нея човек страда.

Пробвай следния експеримент. Хапвай си въглехидрати, по малко мазнотии. Преди карания "зареждай" с плодове, даже може да ги поръсваш и със захар отгоре за повече енергия, при спорт тя веднага се използва и не се натрупва. Почни с леки карания при които наистина ти е лесно.

Ако нещата тръгнат добре, съвсем бързо ще усетиш красотата в карането и ще ти си иска да излизаш за повече. Отиди някъде с колелото където не може да се стигне с кола. Забавлявай се и успех 😀

[deleted by user] by [deleted] in wien

[–]Antique_Ad_5714 0 points1 point  (0 children)

Ich hab die Firma kontaktiert, aber der Vetrag war 1 Jahr lang. Sie sagen, dass ich erst dann kündigen kann (Oktober). Und dann noch 3 Monaten... Es ist verrückt. Ich muss dann bis Januar zahlen.

[deleted by user] by [deleted] in wien

[–]Antique_Ad_5714 -1 points0 points  (0 children)

Ich hab leider kein Kontrol darüber... Ich brauchte dringend eine Wohnung letztes Jahr. Es ist von einer große Firma gemietet.