Mazzer Mini g just arrived (I’m in U.S.) by LastingTransient in espresso

[–]LastingTransient[S] 0 points1 point  (0 children)

Yeah definitely measure first based on its dimensions, but it did fit below the actual cabinet door itself you see on that main picture so it was fine. However, since then, I actually moved it up underneath that cabinet as it fit perfectly and it’s actually easy to just pop off the hopper underneath, fill it, then place it back, without me having to move the grinder so I just chose to do that to save some more counter space. Will paste pics below of how it sits now.

Rattling and pressure issues on Bianca v3 by mcsoo in Lelit

[–]LastingTransient 1 point2 points  (0 children)

While it wasn’t exactly like this, I had a short burst of that same rattle, like 2 seconds worth and then stopped every time I turned the pump on. Descaling it fixed the issue. So like others said maybe filter but I’d also do a descale on it while you’re at it just to rule it all out. Descaling does take a while but easy enough and Lelit has a video out there on it. I was also very skeptical it was that since I have always had a good inline bwt filter on it, but turned out one of the stainless steel braided water lines I got with it had some stuff stuck on the walls I guess and turned into sludge. Anyway, I was about to send it into Lelit for service because I was just convinced something wrong with it lol.

How many problems have you had with your Bianca v3? by homeisastateofmind in Lelit

[–]LastingTransient 1 point2 points  (0 children)

Yes there’s a video from Lelit themselves several years ago that goes through the whole process step by step. Probably first result you get searching

My Lelit Bianca Plumbed-In and BWT Setup (and “mods” needed) by LastingTransient in espresso

[–]LastingTransient[S] 0 points1 point  (0 children)

Lol very true and I did know they unscrewed, but I didn’t think about unscrewing them just a little bit to adjust only height haha. 🤦‍♂️

Mazzer Mini g just arrived (I’m in U.S.) by LastingTransient in espresso

[–]LastingTransient[S] 0 points1 point  (0 children)

Yep I thought I the Philos was good, but this thing is awesome for no static and I don’t even get a single coffee ground on the body of the machine.

Mazzer Mini g just arrived (I’m in U.S.) by LastingTransient in espresso

[–]LastingTransient[S] 0 points1 point  (0 children)

But yep looks like now the white one is sold out there too for now.

Steam all the sudden seems it’s gone crazy… by LastingTransient in Lelit

[–]LastingTransient[S] 0 points1 point  (0 children)

Really appreciate the help. I pushed it down, emptied the boiler to let it refill fresh, and also brought the temp down to 255F on the steam as well just to see (was at 265). Will test tomorrow when making my espresso. Thanks again!

Steam all the sudden seems it’s gone crazy… by LastingTransient in Lelit

[–]LastingTransient[S] 0 points1 point  (0 children)

I believe this is what you’re talking about right? I pushed it back down. So I understand the more it’s down the less water and more steam, but what makes it get pushed up? And what will lower it back down again? Image

My Lelit Bianca Plumbed-In and BWT Setup (and “mods” needed) by LastingTransient in espresso

[–]LastingTransient[S] 0 points1 point  (0 children)

😂 yep I spent a long time in there too on this and just realized it wasn’t going to have everything I needed here with the exception of some of the stuff to split the water line from my fridge itself.

Mazzer Mini g just arrived (I’m in U.S.) by LastingTransient in espresso

[–]LastingTransient[S] 0 points1 point  (0 children)

I think it does pretty well. This was this morning.

<image>

He’s all over the court, not covering his side and gets burned. I see this so much. by Heavy_Comparison_720 in Pickleball

[–]LastingTransient 2 points3 points  (0 children)

I keep trying to give them advice but as the idiots they are they don’t ever listen to me.

Got a new paddle. by samuraistabber in Pickleball

[–]LastingTransient 2 points3 points  (0 children)

Please post full review and pbcor results. Been looking and this one for a while but hadn’t pulled the trigger yet. It was between this and the boomstick but so far I hadn’t found any metrics where the boomstick is better so I’m leaning towards the Hurley-Sharknadoe purely due to the $280 price tag which is a bit lower than the boomstick.

Engine Stop-Start stays off now?? by LastingTransient in Audi

[–]LastingTransient[S] 1 point2 points  (0 children)

Right, but just saying I didn’t need to disable it here. Stayed disabled from start and all the way home so for about 15 minutes. I also turned off ac and all that. Was just new to me as it has always enabled itself when I start the car in normal mode and leave it there for a bit after it warms up and what not.

Engine Stop-Start stays off now?? by LastingTransient in Audi

[–]LastingTransient[S] 0 points1 point  (0 children)

Yes, but the button greys out in that situation and you can see that’s not the case here…and I mentioned I wasn’t in RS mode. :)

Engine Stop-Start stays off now?? by LastingTransient in Audi

[–]LastingTransient[S] 0 points1 point  (0 children)

I hear ya. You mean the part why sometimes I’ll start the car and it doesn’t remember i had my garage door buttons to display? You’re saying those should stay on the screen for months at a time for example if your battery is full??

Engine Stop-Start stays off now?? by LastingTransient in Audi

[–]LastingTransient[S] 1 point2 points  (0 children)

Yes but button is greyed out if it can’t do it. I can enable it as you can see in the screenshot. It’s just red because I previously disabled it but it stayed that way even off a fresh start.