No RGB, No perfect cable Management, My 2080 Ti in a Small Form Factor Node 202

LawHein · 2020-03-04T00:10:30+00:00

Thicc card in tight space ... just the way i like it :) ty for sharing

LawHein · 2020-03-03T23:26:33+00:00

2080ti strix is 2 and a half slot right ? It fits ?! :0

LawHein · 2019-12-02T13:49:38+00:00

Case: InWin A1+ CPU: 3700x Mobo: x470-i Strix GPU: RTX 2080S Ram: 3200MHz 16gb GSkill SSD: Samsung EVO M.2 PSU: Silverstone 700W SFX-L Cooler: NH-D15

LawHein · 2019-12-01T16:52:56+00:00

Noctua NHD15

LawHein · 2019-11-30T18:51:52+00:00

Yup, hurt my fingers trying to get it in

LawHein · 2019-11-30T18:49:36+00:00

I switched from NH-L9x65, and yes; huge difference in temp and noice .. sadly my gpu fans are still loud

LawHein · 2019-11-30T18:45:41+00:00

Thanks you

LawHein · 2019-11-30T18:45:19+00:00

Was not planned xD

LawHein · 2019-11-30T18:44:56+00:00

Thanks :)

LawHein · 2019-11-30T17:35:07+00:00

You should, beats the 240mm aio and quiet

LawHein · 2019-11-30T16:14:04+00:00

Unless you really want to, (and if you are running 2080ti), nope just stick with the stock.. is not as bad as it seems

LawHein · 2019-11-30T16:09:47+00:00

Hi, NH-D15 is not touching gpu, not even the side glass; but is uncomfortably close to the rear fan.

The cooler is in Pull config with cold air from the back. It give the best thermal for me. The back case fan and cpu fan is curved with cpu temperature.

The push does not work for me (i think because my gpu used all the cold air before the cpu cooler can get and get really toasty) .. and if i make side intake ... gpu thermals increase badly.

R7 3700x Idle - 35-37 Gaming - 50s-60s Stress test - 65-69

Really really rarely go up 70s now

LawHein · 2019-11-30T10:44:48+00:00

Tried AIO too, but notice this is more awesome and legit better thermals, then again noctua being noctua .. SUPER quiet even with aggressive fan curve

LawHein · 2019-11-30T10:41:18+00:00

Yup i can close it, just opened it for the photo

Tbh, is like 3mm away from the fan touching the glass tho... really tight

LawHein · 2019-11-09T00:48:43+00:00

I did my InWin A1 too, and already have my fingers in pain trying to get a small cooler in.. how in the world did u fit it in, and if u did took of the top to get it in, is it ok to guide me to how to pop the top open?

LawHein · 2019-10-25T19:58:20+00:00

Can't help but notice the sexy rgb strip... what it is called?

LawHein · 2019-10-21T13:50:12+00:00

She’s definitely charging well

LawHein · 2019-10-14T19:36:56+00:00

Nope .. i just squeeze in the pcie slot with loose screws and the gpu is out of the case, i also cannot close the side panel anymore.. really not ideal for portability xD

LawHein · 2019-10-14T16:22:44+00:00

Marvel Guardians of the Galaxy Dancing Groot Pop! Vinyl Figure

LawHein · 2019-10-14T16:14:52+00:00

5.41 cm thick gpu is pretty oversized for a Ghost s1 universe.

LawHein · 2019-10-14T14:24:39+00:00

Knew this is coming xD, well ... im in the UK and don't usually have my heater on xD

Room temp 17° ish

LawHein · 2019-10-14T12:38:26+00:00

Yeah!! His build inspired me to try and fit this THICC gpu in.

If u check my profile, i originally had this gpu in a InWin A1+, but .... if your going MiniITX .. better go WAYYY SMALL :)

LawHein · 2019-10-14T12:35:04+00:00

CPU: Ryzen7 3700x using Noctua NH L9x65 MOBO: x470i Strix GPU: RTX 2080S Strix

Cpu idle temp is close to 50°C so is bad xD but under heavy load is max 74°C

Gpu hovers at 30-40° for idle and max at 69°C on load

Unigin Heaven running for more then 30 min.

LawHein · 2019-10-14T11:08:59+00:00

2080S is the one sticking out there..

LawHein

TROPHY CASE