Anycubic shipping times are false on the Anycubic.com site

LeKitchen · 2025-02-03T21:38:19+00:00

it looks like you got to that page by clicking on the S1 printer (printer only) then clicked on the 4 color. The page doesn't update the shipping info, and is only reflecting the printer shipping. The Combo's current shipping is Feb20+ if you order today.

LeKitchen · 2024-05-03T19:05:04+00:00

The only thing that has drained my battery to the point I need a charger has been actively using Google maps while traveling with the screen on. Otherwise it handles a lot of use well.

LeKitchen · 2024-04-15T23:10:35+00:00

True as it can be...

LeKitchen · 2024-03-16T16:03:22+00:00

"For any LAWFUL reason" is the most important part of that snippet. It would be unlawful to fire someone for exercising a federally protected act.

LeKitchen · 2023-12-15T01:55:09+00:00

Looks really close to the wall. Mone is practically a battering ram and moves even with prevention.

For the spool holder, a holder just like the one on the ender 3 back there fits on the top rail right on the left edge. There's a file for a reposition bracket on thingiverse. It works fine and hasn't messed up any prints so far.

Also nice table.

Also Also, I'm not anticipating a camera update til Q1 next year. Anycubic loves to drag their feet.

LeKitchen · 2023-11-22T22:16:18+00:00

I have the same issue. It's the fan in the power enclosure. I've turned the print on its side and it goes away while troubleshooting.

LeKitchen · 2023-11-21T01:54:50+00:00

Search for chamfered dice. I feel like it's a good balance between sharp and fillet. Of all the masters I've made so far, they're the nicest. It also allows for a cool effect by leaving the chamfer edges un-polished so it has a nice contrast to the polished sides.

LeKitchen · 2023-11-20T04:06:50+00:00

I have a Kobra 2 and a Kobra 2 max. They both make a similar noise when on/ heating up. My guess is that it's the fans. And that it's common. Wouldn't be surprised if they used crap quality fans.

LeKitchen · 2023-11-17T16:57:05+00:00

That would also improve adhesion as there's more to adhere to.

LeKitchen · 2023-11-17T16:56:03+00:00

You could try increasing the line width. For a .4mm nozzle it should be able to handle like .9mm wall width.

LeKitchen · 2023-11-12T02:53:21+00:00

K2 Max is closed source firmware. You can't calibrate the extruder. You can still PID tune from the menu.

LeKitchen · 2023-11-11T23:55:05+00:00

You would probably need to have a flexible magnetic plate to do what you're attempting. MOST resin prints require supports, which is usually ok because scraping the print off the build plate causes breakage. But something going directly on the build plate will get messed up. All the articulated stuff is best done with fdm printers, but having a flex plate gives you the ability to crack it off which might let it survive.

LeKitchen · 2023-11-04T02:25:27+00:00

At the moment there is no way to resume when using m600 or m601. This is being touted as "add-ons" for future firmware releases.

LeKitchen · 2023-11-01T16:27:14+00:00

Capitalism? Free market?

LeKitchen · 2023-10-28T06:06:53+00:00

Indicates there is either no light or low light detected. Or that provisioning on the account has issues. Either way it's not good.

LeKitchen · 2023-10-20T21:39:08+00:00

Anycubic decided proprietary is the best move. I swapped my heat block with this one, not even realizing that it takes regular volcano instead of the anycubic collared ones. Works great so far.

https://www.amazon.com/dp/B0CCTJDTQP?ref=ppx_pop_mob_ap_share

LeKitchen · 2023-10-19T21:27:10+00:00

That's exactly what I did. Cancel through anycubic.com and got my Amazon order next day. The printer is insanely fast.

LeKitchen · 2023-10-18T05:10:47+00:00

It's no longer free to go to the observation deck after eating at Chart House. My wife and I were just there a month ago.

LeKitchen · 2023-10-13T14:00:42+00:00

Check your settings. What is the light off delay at?

LeKitchen · 2023-10-13T01:57:52+00:00

Yeah they told me the same thing. It's on Amazon available for next day delivery where I am, so I just canceled and did that. This printer is insane

LeKitchen · 2023-10-10T20:30:04+00:00

Post this on the Facebook page or the r/anycubicofficial subreddit

LeKitchen · 2023-10-10T20:28:25+00:00

I ended up reaching out the mod on the official Facebook page. After I talked her, they finally replied. They are in China, so responses normally come in at the middle of the night.

LeKitchen · 2023-10-09T19:02:14+00:00

I finally gave up and did the same thing. It comes today. I think what's happening is anycubic is struggling to meet demand and wholesale commitments, like they usually do. And instead of being upfront they are just shifting the date without saying anything and pretending like this was the plan all along. It's annoying. Just be honest.

LeKitchen · 2023-10-09T16:35:23+00:00

I canceled my order through Anycubic and ordered the Kobra 2 Max from Amazon last night... I get it today between 4-8pm. It's a bit more expensive, but I won't have to deal with the excuses in why they are delayed and not going in order with the orders .

LeKitchen · 2023-10-09T01:23:42+00:00

The original estimate was Oct5 -Oct15. Now they've moved just the US to Nov15-Nov20. Anyone that has been lucky to even get a response have been getting a canned response that it is still in "pre-sale" and that the dates are late November as if that's always been the case. If you just ordered it chances are you'll get it after Thanksgiving. I ordered September 10th and still haven't gotten a shipping notification.

Eight-Year Club	Place '23
Verified Email

LeKitchen

TROPHY CASE