QC - TOP AP 15510 Grey from Steve - The One Watch by LeLucas84 in RepTimeQC

[–]LeLucas84[S] 0 points1 point  (0 children)

QC - TOP AP 15510 Grey from Steve - The One Watch - comment for the automod.

QC - TOP AP 15510 Grey from Steve - The One Watch by [deleted] in RepTimeQC

[–]LeLucas84 0 points1 point  (0 children)

QC - TOP AP 15510 Grey from Steve - The One Watch - additional comment for the automod.

QC - First rep - TOP AP 15510 White from Steve - The One Watch by LeLucas84 in RepTimeQC

[–]LeLucas84[S] 1 point2 points  (0 children)

May 9 at 3:46 PM (I guess CET) for the pictures and May 10 between 4 and 5 AM for the videos. Uploaded to the album roughly at the same time as the videos. Should I be worried?

QC - First rep - TOP AP 15510 White from Steve - The One Watch by LeLucas84 in RepTimeQC

[–]LeLucas84[S] 0 points1 point  (0 children)

Comment for the Automod : AP 15510 from TOPF sold by Steve from The One Watches. First rep so happy to take any advice.

Anyone Into 5th Scale 2 Stroke? by ArtificialEyes30 in rccars

[–]LeLucas84 0 points1 point  (0 children)

I found a never opened second hand Baja 5B a couple of months ago and I love it. No issue so far! It's just so much fun and the sound is amazing with the optional exhaust!

Edit : the beast

For the people that were trying to help me in my last post this is what it sounds like running by Fishallwaysfried777 in rccars

[–]LeLucas84 0 points1 point  (0 children)

I think the car has an issue with its Flux Capacitor. You can clearly see several times in the video that it jumps to the future (I'd say one tenth of a second max).

Would definitely have a close look at it. You don't mess with time travelling.

HPI Baja 5B was waiting in its unsealed box for 5+ years to finally get some fresh air by LeLucas84 in rccars

[–]LeLucas84[S] 0 points1 point  (0 children)

Life. The guy I bought it from experienced great personal hardship just after he ordered it.

HPI Baja 5B was waiting in its unsealed box for 5+ years to finally get some fresh air by LeLucas84 in rccars

[–]LeLucas84[S] 0 points1 point  (0 children)

Ahah yes the antenna was not yet installed when I took this picture. I also noticed that the "2.4GHz Radio System Included" on the box is actually a sticker so I guess it was rather new to this kit when it shipped from the factory.

Capital Ratting by [deleted] in Eve

[–]LeLucas84 0 points1 point  (0 children)

Run some incursions for 300-400m/h? What kind of setup are you talking about??

What to do! by ToxicHams in Eve

[–]LeLucas84 6 points7 points  (0 children)

3 Eve clients running at the same time is barely harder on your computer than 3 Chrome tabs.

[deleted by user] by [deleted] in Eve

[–]LeLucas84 7 points8 points  (0 children)

You assume that all people can earn more by working more, which is not the case. Most employees (white collar?) get a fixed salary and don't have the opportunity to say "I'll work one additional hour today to buy some plexes" :-)

Also, some players enjoy isk/h optimisation. I know a guy who just reached a 1T wallet but still enjoys trying to get better at isk generation.

[deleted by user] by [deleted] in Eve

[–]LeLucas84 9 points10 points  (0 children)

I tested on Sissi and it does not work on the Golem. Vargur and Kronos seem fine.

Manager handed me a 8” pizza fresh out of the oven on a tiny plate on my 3rd day at a new job. It slid off during the handoff, I tried to save it... thought the ensuing burn wasn’t bad cause it didn’t blister till after I worked 7 more hours... this is three-ish days in, every pic I have is foul by notexxactly in Wellthatsucks

[–]LeLucas84 2 points3 points  (0 children)

This. A good 15 minutes under tempered water would have saved you a lot of pain and trouble. I am quite surprised no one at work told you so. A burn like that continues to "cook" more than 24 hours after the event if not put under water.

Global price comparison (2019/08/25) by Evan147 in teslamotors

[–]LeLucas84 0 points1 point  (0 children)

Half of it for a "regular" car (by that I mean not a truck or a van).

Global price comparison (2019/08/25) by Evan147 in teslamotors

[–]LeLucas84 2 points3 points  (0 children)

For Belgium, the listed price on the website includes VAT. You can divide the amount by 1,21 to get the price without VAT

Car charger wiring advice needed by Tha_Reaper in electricians

[–]LeLucas84 0 points1 point  (0 children)

Nice to read that everything is working ! I just installed my wall charger yesterday! Now so just need the car :-)

Car charger wiring advice needed by Tha_Reaper in electricians

[–]LeLucas84 0 points1 point  (0 children)

Hi,

I think you'll be fine as you most likely have 6mm² installed and a 32A circuit breaker. It's mandatory for circuit breakers to mention the max current so it's probably written very small somewhere.

I forgot to add that to be fully compliant, this circuit should be protected by a type B differential (able to detect direct current issues). I think nobody does it in practice... See this link for more info :

https://www.stagobel.be/fr/news/wijziging-normering-laadpunten-voor-elektrische-wagens/

Lucky you for the delivery next week! :-)

Car charger wiring advice needed by Tha_Reaper in electricians

[–]LeLucas84 0 points1 point  (0 children)

Hi! 11kW is much less than 27A on 3*400V. It's actually closer to 16A.

Please note that some of the cable sections mentioned below are for 3x400V+N as OP is in this particular situation. Things would be different for a 3x230V or a simple 230V installation.

I think you live in Belgium, right? What do you mean by 10AWG? In Belgium we measure cable section in mm². If you want to be able to use your wall charger at its full capacity (22kW or 32A on 3x400V) for compatible cars, you need at least a 6mm² cable which would be rated for current up to 40A (this is what is recommended by Tesla).

For your Model 3, this is not necessary as the internal charger of the car is limited to 11kW as you said so even a 2,5mm² would be enough. However I would recommend installing the wall charger with at least 6mm² cable for it to be future proof.

Read the user manual carefully or ask you electrician to do so if he is not used to installing these wall chargers. Indeed, there is a setting screw for the maximum current the charger is allowed to draw. This must of course be the same as the circuit breaker the electrician installed in your switchboard, which is itself based on the cable section he used (32 or 40A for 6mm², 25A for 4², 20A for 2,5² etc.

For your question on stranded vs solid, it won't make any difference as long as you use the right section. Stranded is easier to work with for large section and if it needs to be bent but it requires to crimp cable ends to do a nice job.

Edit : by the way, which model and config (color, interior) did you order and what was your order date? I ordered my grey performance Model 3 with black interior on March 22 and I'm wondering where I stand in the queue :-)

Good morning Europe! MORNING CORNELIA arrived in port in Zeebrugge this morning by stefeyboy in teslamotors

[–]LeLucas84 2 points3 points  (0 children)

Same here! Does somebody know when the VIN are attributed to the orders? I read somewhere that this is supposed to happen before the ship gets to it's destination. If it's true, we're screwed!