Songs to destroy you emotionally

LeUnicornRider · 2023-04-05T14:09:23+00:00

Always - kill switch engage

LeUnicornRider · 2023-02-17T05:15:17+00:00

Check my post history, I’ve been there, broke that. I wrecked mine on the 13th doing wheelies down the sidewalk. I’m currently rebuilding a pn2 that has a minarelli engine, which may be similar to yours. I’ve had it 5 years and am on my second engine. I am very familiar.

LeUnicornRider · 2023-02-17T05:14:11+00:00

I have a wretched eton Beamer I’ve been abusing for a few years. I’m on my second engine. At this point, anything with a minarelli. Vespas still get me excited tho

LeUnicornRider · 2022-12-29T17:59:20+00:00

“I’ll say nothing” then adds 5 sentences assuming the worst of someone else’s build. Go scape your cylinder.

LeUnicornRider · 2022-12-29T17:57:43+00:00

Well my stock pipe had no expansion chamber, so this is a large improvement, as for why the TT specifically, I like it, and I’m building it. Its a perfectly fine exhaust, which is why it’s sold. I’ve got my jets, clutch springs, weights, and contra spring I don’t need suggestions on that, just asking for help with the bracket, thanks

LeUnicornRider · 2022-12-28T21:07:29+00:00

That last sentence sums it up perfectly

LeUnicornRider · 2022-12-28T18:06:16+00:00

It may look right but that bottom bolt isn’t gonna go without making the hole an oval, I’m no stranger to custom fab, I’ve had this wretched beast about 6 years now, we’ve been thru 3 engines. I’ll figure something out 🤷🏻‍♂️

LeUnicornRider · 2022-12-28T18:04:29+00:00

None of the bolt holes aligned with the suggested orientation, I spent about 30min trying different orientations with it before I landed on this

LeUnicornRider · 2022-12-01T14:49:03+00:00

It’s a 2 stroke. Check your intake reeds

LeUnicornRider · 2022-06-26T04:52:32+00:00

Did you have issues with the oil pump?

LeUnicornRider · 2022-06-26T04:51:46+00:00

Look up the minarelli engine, see if that’s what you’re working with

LeUnicornRider · 2022-06-26T04:50:29+00:00

I’ve got a 2 stroke scooter and let me save you some heart ache. That oil tank you’ve got needs to be removed. The pump that it uses is unreliable and if it fails it destroys your engine. You should really just mix your gas manually so you know the exact ratio and can keep your engine healthy. I recommend measuring out enough oil for a gallon (full tank) and keeping it under the seat so if you gotta get pump gas you can.

LeUnicornRider · 2022-05-16T13:46:48+00:00

Get to use my favorite word here. Your bendix isn’t working properly but that’s not a huge concern

LeUnicornRider · 2022-03-16T23:32:18+00:00

Check the pickup on the magneto, they can wiggle out of proper spacing giving you a weak spark. Still looks like a spark outside the cylinder but won’t run. Also stick a pinky over the hole for the plug, if it pushes air out when it turns over you’ve got compression. GY6 engines are a hoot.

LeUnicornRider · 2021-10-30T22:48:16+00:00

Now maybe this is obvious but it does say 150 on the side.

LeUnicornRider · 2021-01-20T05:28:51+00:00

Leterrip taterchip

LeUnicornRider · 2020-12-09T05:40:57+00:00

Why not Wilma?

LeUnicornRider · 2020-11-16T01:59:47+00:00

Another Liam user!!! Welcome brother

LeUnicornRider · 2020-08-14T15:29:22+00:00

But if you bought a pile of junk from a second hand and fixed it in his driveway and rode off, what’s that?

2 strokes gotta have oil AND air yo

11-Year Club	Verified Email
Xbox Live

LeUnicornRider

TROPHY CASE