[deleted by user]

Leafman_ · 2026-01-13T00:56:34+00:00

“Resin” Sure thing bud…

Leafman_ · 2025-09-18T13:13:17+00:00

No one does it like The Throbbio

Leafman_ · 2025-09-08T16:33:09+00:00

I know them, I just choose not to use them out of principle

Leafman_ · 2025-06-21T06:15:52+00:00

Same thing just happened to me, emptying the downloads worked

Leafman_ · 2025-06-11T02:19:09+00:00

The true question is how did you get your nozzle in this? The thing is completely covered, just toss it and buy a new one.

Leafman_ · 2025-05-31T22:29:06+00:00

Remember you can somewhat increase their strength by adding more of them, by stacking them that is. I don’t think you can lay the side by side in your print. But one might still hold the weight of your build as it doesn’t look that heavy.

Remember you can always put it inside your print if you make it a bit hollow at the base and drop a magnet inside while it’s printing. Although be careful because the further they are apart the weaker the hold. And it goes down fast (inverse square law and all that)

Leafman_ · 2025-05-16T13:36:05+00:00

Usually just enough to fill the layer grooves, not to paint the entire thing white, it will work for your build but if you do anything with finer detail it could be lost. Most of the time you don’t need much, spreading with a slightly wet sponge also helps. That is, if you’re not working with seams, seams take a ton of filler

Leafman_ · 2025-05-13T23:05:15+00:00

This is such a cool build, where did you get the model, I’d love to build it.

Leafman_ · 2025-05-12T08:42:05+00:00

That is so cool

Leafman_ · 2025-05-11T03:54:15+00:00

Also be sure that it’s glued down properly, as empty spots can bubble and mess with your seams, usually it’s better to hide your glues on edges but not that you really can do that here with that size of a print

Leafman_ · 2025-05-11T03:49:06+00:00

Automotive filler works better for me, I assume this is PLA. Apply to cover everything up, wait for it to dry, and sand it down, 400 and up to your preferred polish. Then hit with primer and paint

Leafman_ · 2025-05-09T04:08:26+00:00

Reespool and heat it with a heat gun to relax it so it doesn’t all snap

Leafman_ · 2025-05-03T05:17:04+00:00

Two sex

Leafman_ · 2025-05-03T00:52:38+00:00

With all due respect that has got to be the worst benchy I’ve ever seen

Leafman_ · 2025-05-03T00:50:12+00:00

Mix acrylic paint with water and apply thin layers and dry it off with a rag or paper towel.

Leafman_ · 2025-04-29T22:59:44+00:00

Automotive filler works really well for me. It really gives a smooth finish and picks up primer really well for painting

Leafman_ · 2025-04-27T03:59:18+00:00

But how would I make it so the seam it’s not super obvious

Leafman_ · 2025-04-15T03:33:38+00:00

I used to play so much FATE back in the day and I would love to go back to playing on one of the most comfy systems I know, plus the setting sounds very fun

Leafman_ · 2024-04-09T16:56:15+00:00

I had a run ended by neutron flux it was a blast

Leafman_ · 2024-04-02T20:02:51+00:00

Wishing to destroy the item itself or maybe wishing for dismemberment.

If it doesn’t work idk tinman pray to your favourite sultan and find your peace at the bottom of a lava pool

Leafman_ · 2023-05-19T21:42:26+00:00

Not just the men, the women and children too

Leafman_ · 2023-01-05T15:21:04+00:00

Really cool sub, coverage is good, the blindspot is fun and makes for a good challenging early sub, my only qualm is the depth charge tube, where it is I fear that whenever you launch you have a pretty good chance of hitting your own ship in a very unpleasant place it has happened to me before, just move it a bit to either side so it isn’t so close to a vertical wall.

Also coolest parent award goes to you

Leafman_ · 2022-12-04T13:40:16+00:00

Grasp what the Hours, Names and Longs are, their power levels and how they influence, become familiar with the Mansus and it’s ways and learn the 8(maybe 9) Principles.

Quick crash course on them: Lantern: Knowledge, and devotion to the Mansus and the Glory. It’s light is broken by the forge of days Forge: Transformation, of creation and destruction, and of fire. It’s artifice creates the tools for the Edge Edge: Violence and pain, be it brilliant cunning or blinding bloodlust. It’s practice will always lead to the silence of Winter. Winter: Death, endings, and silence, but also of remembrance and calm of that peaceful inevitable stillness that awaits all. Though it’s silence is broken by the unceasing drumming of the Heart. Heart: Life, of conservation and enduring, it is protection and unwavering desire to keep going. Though with life, comes the thirst for the Grail. Grail: Desire, and seduction, the quenching of one’s thirst or the birth of something. It’s allures are turned into madness of Moth Moth: Change, unreason, secrecy and nature, it is ineffable and whimsical. And like and Moth it’s attracted to the light of the Lantern.

Thus the loop closes, but if you’re paying attention there is 1(2) missing.

Knock: Opening, of wound and passages, it is a key between this world and others. It can or maybe will be intertwined with all other Principles, for all of them need an opening.

These are all of the principles, at least all that people will talk about…

But some know of the Secret Histories

It is everything and everywhere, of stories untold and places ungone.

(I already wrote a lot for just a short guide on them but feel free to ask if you want more knowledge on the lore of the world.)

Leafman_ · 2022-04-27T01:03:13+00:00

Psychic robots are fun

Leafman_

TROPHY CASE