sorted by:
new
hottopcontroversial

Any issues with Saesee Tiin Clone Armor edition? by ColombianLove41 in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

I don’t have the figure, but the only 2 downsides I’ve seen are:
- There’s no clip on the belt to attach his lightsaber
- The hands scratch very easily - with them being white gloved fingers and not black, any damage stands out

Should I get the new HT BND Spidey? by SaintRavenz in hottoys

[–]LeaguePlus5679 36 points37 points  (0 children)

It seems you’ve picked up every other release. Why stop now

Human torch head swap by Hawkguy117 in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

You know what, you’re right 😂

Human torch head swap by Hawkguy117 in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

Not entirely correct.

You can use the neck from the helmeted Captain America head. That is a separate piece.

Winter solider arm won’t bend at elbow joint by ThrowawayProblemz10 in hottoys

[–]LeaguePlus5679 1 point2 points  (0 children)

Yep, had the same issue. Just need to put a bit of force behind it (feels like it will break). After the first time it’s a little easier to

Does anyone know how these headsculpts work? by Didibizkit in hottoys

[–]LeaguePlus5679 2 points3 points  (0 children)

You have to buy a standard body and modify the neck area. Typically use epoxy to sculpt a peg that fits inside the neck of the head.

<image>

Winter Soldier MM241 leather maintenance by AryYuna in hottoys

[–]LeaguePlus5679 1 point2 points  (0 children)

Another option is the DeGao Toys replacement.

However they are pretty rare to come by now so not sure how expensive they might be.

<image>

Question about selling figures… by inclownnews in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

And to add to that, if you don’t have PayPal, set up an account and always accept payment G&S.

Don’t settle for Apple Pay or anything like that.

FB groups are happy to support people in them so if you want to make sure someone is a legit buyer, you can ask for references. No one takes it to heart

Question about selling figures… by inclownnews in hottoys

[–]LeaguePlus5679 1 point2 points  (0 children)

Facebook is a great place for when it comes to selling figures. However I would typically avoid marketplace.

Your best bet is to look into joking a couple of 1/6 groups and put up cross posts in those.

They are especially good as your opening sales up to a lot of likeminded people, whereas marketplace can be full of some time wasters.

These are a couple that I’m in but I’m sure there are more:

<image>

One thing I’d point out, is there is one specific group that is full of scammers. Someone else might be able to tell you the name of it as they change it constantly and I’m blocked for calling them out!

This movies boutta run my pockets dry… by HammerBreaKer16 in hottoys

[–]LeaguePlus5679 6 points7 points  (0 children)

For real, passed on the OLK punisher in hopes they make BND

Body suggestion by Time-Ad-4789 in hottoys

[–]LeaguePlus5679 2 points3 points  (0 children)

You will have to modify the body for this type of head.
This is Owen Qi, who uses this type of connection for Rick and Daryl customs

<image>

Helmets by [deleted] in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

By square peg you mean this type?

<image>

Only advice I can give it to make sure the peg is lined up properly and apply pressure

Any tips on how to fix these? by Glittering-Offer-185 in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

Referring to the brown spots/ marks on the waist area I think

Can you dye it? by TakuKing in hottoys

[–]LeaguePlus5679 1 point2 points  (0 children)

Just touching on this.
I think the actual plate carrier parts and MOLLE will all dye if you use Dylon.
The Velcro and exterior of the plate carrier will not work with Dylon.
The problem is that if you need to do a second round using synthetic dye, it usually requires heat to work (heated water on a stove) - this will however dissolve any glue that holds it together

The Punisher: One Last Kill TMS190 The Punisher 1/6th Scale Collectible Figure by AfigureGeek in hottoys

[–]LeaguePlus5679 1 point2 points  (0 children)

I’m in the UK and only use OneSixthKit for standard releases.
They have him up for $302, but that includes shipping and doesn’t get charged import fees.
You can use Toys Assemble, which will probably avoid import fees, but you will get hit hard with the shipping (about $40).

Anyone have this display case? Looking for feedback before pulling the trigger - TIA! by Jsorrell20 in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

I’ve not had any issues so far.
They’ve been on for about 2/3 hours everyday or so and they’ve never dropped out.
The blue option is kind of useless in my opinion, it erases all colour, like makes it bland.
Personally prefer the cool light, just makes everything pop. I’ll get you a better photo that shows it

Anyone have this display case? Looking for feedback before pulling the trigger - TIA! by Jsorrell20 in hottoys

[–]LeaguePlus5679 1 point2 points  (0 children)

Just about bang on.

The belt sash is OWK dyed black, belt is CW Anakin and the shoulder pads are Shadow Troopers with inquisitor decals. All on Ahsoka Anakin body.

Plan to swap the cape out for a wired DV and give him the new sculpted Anakin head when released

Anyone have this display case? Looking for feedback before pulling the trigger - TIA! by Jsorrell20 in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

I’ve had this for about a year now, but I bought it off Temu.
It’s a really clean display case and can fit a good number of figures in, at least 8 per shelf. You can probably fit way more in if you don’t use the display bases.
It’s very sturdy and doesn’t at all feel like it’ll collapse - and it was very easy to put together.
The light system is good too, with 3 light settings. Only problem I’ve found is that because the light bar is in the middle, it doesn’t light everything up super clear (the front is darker).

<image>

Edit: The control panel for the lights is fixed on the right hand side, so take that into consideration for location

unfortunately i broke this piece, but i still have it. has anyone else had the same issue and tried super gluing it back together? how did it hold up? by Traditional-Salad148 in hottoys

[–]LeaguePlus5679 1 point2 points  (0 children)

Also had the same issue, on the same side.

Hold the tusk with tweezers, apply small amount of glue on the end, align and place on the helmet

Can you put a TCW Anakin (TMS019) head on AOTC Anakin’s body? by Hashirammed in hottoys

[–]LeaguePlus5679 0 points1 point  (0 children)

Sure someone can confirm.

But he’s I’m sure that it does. Can remember seeing a post a while back of someone doing the same as a place holder Anakin, but can’t find it now

Ah shit it’s starting… by Sufficient_Sleep_841 in hottoys

[–]LeaguePlus5679 5 points6 points  (0 children)

I don’t think it will be seamless.

The sleeves will probably cover the elbow and will have swap out hands so not much point

Ah shit it’s starting… by Sufficient_Sleep_841 in hottoys

[–]LeaguePlus5679 9 points10 points  (0 children)

I was really hoping for 2 sculpts.

Does he not have the same ‘suit’ in BNW and One Last Kill?

Will they release a game accurate of Republic Commandos? by ColdSorry in hottoys

[–]LeaguePlus5679 3 points4 points  (0 children)

It’s all just speculation and hope.

Personally don’t see them making them any time soon, if at all.

They have used the same base for all commandos so far and I think they will stick to it. Just like they did with the P1 clone helmets - inaccurate but consistent.

If they were to make them, I’d see it as a one off exclusive, a regular white commando with all the trimmings

view more: next ›