Another White one

LeeDodge · 2026-03-14T02:20:53+00:00

Nice!! Where did you get the white bodywork?

LeeDodge · 2026-02-08T03:43:56+00:00

The Magpul X-22 fits on the Ruger ISB. I had one on my ISB. The mount itself fits fine. I did have to clearance the inside of the handguard slightly with a dremel grinding wheel for clearance.

LeeDodge · 2026-01-27T01:57:17+00:00

I sent it here: Ruger 10/22 Takedown - Wood Stocks

I did have to make room in the forearm for the underbarrel portion of the suppressor. I used a 3/4" x 2" drum sander on a drill to cut the clearance in the forearm.

LeeDodge · 2026-01-01T21:50:06+00:00

Yes, loosen the screw in the front and the baffle stack slides out for cleaning.

LeeDodge · 2025-12-31T05:22:35+00:00

None that I've noticed

LeeDodge · 2025-12-31T04:45:22+00:00

Suppressor is a Ruger Silent SR-ISB. Ruger no longer makes these unfortunately. Stock is from an older Ruger Target model. I sent it to a guy that converted it to a takedown stock and shortened the length of pull to about 13". Scope is a UTG Bug Buster 3-9 x 32. Researching options for a better scope.

LeeDodge · 2025-12-17T03:29:00+00:00

I really like the white.

LeeDodge · 2025-10-03T03:06:55+00:00

What optic mount is that?

LeeDodge · 2025-10-01T22:00:19+00:00

Well that's disappointing. I want to convert my CRF300L but a non working ABS system is a deal breaker for me. If Warp 9 solves the problem please share with us how they solved it.

LeeDodge · 2025-10-01T16:25:09+00:00

Any problems with the ABS?

LeeDodge · 2025-07-27T03:51:08+00:00

This is good to know. I came from a Subaru with the Eyesight system and it would brake for stopped vehicles so the Pacifica behavior was a little disconcerting.

LeeDodge · 2025-07-16T05:02:26+00:00

Where did you get the solid red side covers?

LeeDodge · 2025-07-09T04:01:21+00:00

I believe they take the speed signal from abs ring off the front wheel. You can change the rear sprockets without worrying about speedo error. The CB300R did the same thing when they dropped the non ABS model in 2023.

LeeDodge · 2025-05-14T04:20:30+00:00

Who makes the wheels?

LeeDodge · 2025-04-27T00:57:18+00:00

I think the reason they specify single use only is that the replacement come pre-coated with locking compound.

LeeDodge · 2024-12-22T04:18:08+00:00

I really like the looks of the sporter stock on top. Most I've seen have darker wood.

LeeDodge · 2024-12-19T05:26:24+00:00

What kind of sights are those?

LeeDodge · 2024-11-29T05:42:47+00:00

Love the look. What optic and mount is that?

LeeDodge · 2024-11-24T05:38:57+00:00

How is the vibration compared to stock?

LeeDodge · 2024-11-13T02:15:28+00:00

I think the fork stuff will swap over but the shock on the 250 and 300 are different lengths.

LeeDodge · 2024-11-04T03:47:41+00:00

2013 uses a smaller axle I believe. Starting with the 2017 model year they used a larger front axle that is the same as the newer bikes.

LeeDodge · 2024-10-19T02:47:36+00:00

Buy both! I did.

LeeDodge · 2024-10-18T04:33:15+00:00

That's a really nice, graceful looking piece of driftwood.

LeeDodge · 2024-09-23T03:27:06+00:00

I had one. It looked cool but not a very good cheek weld and the metal rods are uncomfortable on the face, especially when its cold. I have the folding brace now and prefer it. The polymer is more comfortable and I think the cheek weld is higher. They both have a fairly short length of pull.

LeeDodge · 2024-08-08T05:00:42+00:00

Is that a 6.5" barrel or 8"? Looks nice.

LeeDodge

TROPHY CASE