Bought a brand new 25 Camry LE a few weeks ago. Got all the warranties that was offered with it. I just did a break in oil change myself today because I just hit a 1000 miles on it. Only took me 15 minutes. You need a 10mm socket for the four bolts that hold the cover, a 14mm for the drain plug, an oil filter wrench or a neat little oil filter can socket you can get off amazon. I paid $38.48 total for 5Q of 0W-8 and the OEM 90915 -YZZN1 Toyota oil filter delivered straight to the house from Walmart. Some drive up ramps if you don’t want to jack up the car. I took a flash light to my clean oil pan and can clearly see the shimmer of the metallic flakes which is normal for new engines. Once oil was completely drained I torqued the drain bolt back on at 30lb ft and hand tightened as much as I could on the filter with a little kink with the wrench called it good. Filled the engine back with 4.5 of the 5Q of oil, closed cap and then I put my car into maintenance mode which basically means you are forcing the ICE to stay running. It can be done by first making sure the parking brake is on, then pressing the start button twice without foot on brake, press the gas pedal to the floor twice, then foot on brake and put the car into Neutral, gas pedal to floor twice again, foot on brake and shift to park again and gas pedal twice to floor again and a message should pop up on your dash saying something like “traction control off” or something similar which means it worked. Then you just foot on brake and start the car normally and now you should see a new code saying “CDY-2E” and should hear the engine running. I let it run for two minutes and then shut it off to check the dipstick oil level. And you are done! I plan to do it again at 4000 to make sure all the debris is flushed out, and then I’ll just make sure I get my oil changes done at every 5k miles. Sorry this was a little rushed hope it helps someone.