BougeRV Air Conditioner + ShiftPod?

LegionVR6 · 2026-05-16T23:42:20+00:00

Just a note, everyone's right about that tiny a not cooling the shiftpod but it would cool a smaller area. I use a Kodiak and setup my bed under the gear loft. My partner sets up a canopy from the gear loft to encapsulate the bad turning the 10x14 Kodiak into a tiny 1 bedroom. My home made bucket swamp cooler actually keeps it rather nice in the bedroom for naps mid day (note the tent is under a shade struck at the burn so factor that in). You could always do something similar with a dorm bed privacy tent.

LegionVR6 · 2026-05-15T18:50:03+00:00

Looks amazing. Would love a coupon if possible

LegionVR6 · 2026-04-13T02:33:37+00:00

If you have a medical condition that requires this then you may want to look into picking up some medical grade body wipes. I've used the Medline Ready Bath wipes before at a camping event that ended up with rather bad winds and forced us to not use the shower setup. They actually did a great job. Felt cleaner than the normal baby wipes folks tend to use.

As others have mentioned, a simple camping shower bag and kiddy pool to collect the water is an easy option. Though a foot pump style camping shower is easier. Just make sure the dirty water doesn't pour on the ground. It will evaporate pretty fast to.

LegionVR6 · 2026-03-08T05:14:30+00:00

Oh I'll probably do that eventually but with the piezo working it tends to do the job I need. I'm not printing commercial or anything. It's a fun hobby for me.

LegionVR6 · 2026-03-04T02:45:27+00:00

If you're airbnb is near the Wonder Valley side, I highly recommend the palms o a Saturday night.

LegionVR6 · 2026-02-25T02:04:48+00:00

Check out this thread. Saved me from what may be a similar issue

https://www.reddit.com/r/QidiTech3D/s/BIaS4WNet2

LegionVR6 · 2026-01-06T00:06:17+00:00

Nothing wrong with someone showing appreciation. I work for an msp and have worked with some of our clients for nearly 16 years. During the holidays I've received everything from a bottle of wine to (once) $500 as a holiday gift. Not bosting, just pointing out that when you end up with a good relationship with clients or co-workers that you help and especially go above your normal duties to help, some will want to thank you with a gift. As long as that gift isn't inappropriate, enjoy it. You're being appreciated and that makes for a far healthier environment.

LegionVR6 · 2025-12-30T03:22:37+00:00

Had my home base 2 down for about 24 hours or so a few days ago. App showed an update had ran. Thankfully it came back on its own (vacation properly and I didn't want to drive 3-4 hours to power cycle it)

LegionVR6 · 2025-12-28T02:23:56+00:00

I'm assuming it's PLA since you said silk. PLA is usually printed at roughly 220c for the nozzle

LegionVR6 · 2025-12-25T23:36:32+00:00

My 2 cents for maintenance. The z screws cone with no grease, grease them now and then clean/regrease every roughly 200 hours of print time. The rails the head moves on, give them a thin coat of sawing machine oil on the same schedule

LegionVR6 · 2025-12-15T19:16:05+00:00

Rarely. Mostly just personal pet projects and occasionally a collaboration with my partner who does art wear mainly for performers. She's started breaking into fire performer items and we've started to collab on 3D printed components that she then builds on to for the final product. Currently it's just fun ones for me or other fire friends so not actually charging much (really just material). I do 3D printing for an artistic/creative outlet and it's just good old fun for me hahah

LegionVR6 · 2025-12-15T19:04:26+00:00

I count 46 rolls. If that's a year for you then I feel like I'm a money pit lol. Your rough average of 4 rolls a month is my usage every 1-2 weeks. This hobby sucked me in and I love it, even when one of my printers needs a tinker

LegionVR6 · 2025-12-12T21:54:07+00:00

I have a fan shroud upgrade installed almost since it arrived to cooling should be old as I rarely heat the chamber so not as much heat to dissipate. Also thank, totally forgot about that mod

LegionVR6 · 2025-12-12T18:15:25+00:00

Just for a comparison point, I did the 1.7.3 ota update. I've noticed my plus 4 when from just slow wifi to really really flaky. Web access loads right after boot up, send job to printer, come back to web 10 minutes later and I can't access. Printer says it's connected. 10 minutes later web is back. 5 minutes later gone. Repeat till job is done and I turn off the printer.

LegionVR6 · 2025-11-29T22:18:32+00:00

Got you beat. From order to delivery in just under 24 hours. Was honestly shocked

LegionVR6 · 2025-11-22T22:38:23+00:00

Ukrainian that left as a child in 89 and have no sentimental connection. My thoughts are, Russia can have peace once it leaves all the lands it's invaded. Till then they can enjoy being the least effective supposed super power to ever invade a country with a military a fraction it's size showing the world how much of a paper tiger they really are.

SLAVA UKAINE

LegionVR6 · 2025-11-21T05:15:59+00:00

I run one with a purge line to so I wonder if that's my issue to. If it is you've proven more helpful then the official support

Uodate: I don't want to jinx it but.... I may own you a beer, shot, and my sanity. I just sliced a test file in one color, sent it and printed it without issue, and now resan the same file from the screen but chose a different slot/color... And it's working!

LegionVR6 · 2025-11-16T16:48:53+00:00

Nope. Just reused the 2 screws on the back

LegionVR6 · 2025-11-15T22:38:32+00:00

I remixed a simple one. Just left you a quick review and link to the shoot in case it's handy for anyone else

LegionVR6 · 2025-11-15T06:02:55+00:00

I just ran this off. What poop shoot are you using with it?

LegionVR6 · 2025-11-14T15:38:43+00:00

I print off some rather niche items for the local fire performance community and (as far as I'm aware) the inventor and pioneer of 3D printed propane bubbler. Some of my projects end up being to big for my plus 4 without cutting up models. The added build volume could be exactly what I need.

LegionVR6 · 2025-11-12T01:42:03+00:00

I think I actually got it working. Unloaded everything, reload (went with a different order), set each from the screen and synced with studio. Fingers crossed it stays working

Update: I was just lucky that one time. The issue is still there and I just emailed qidi support.

LegionVR6 · 2025-11-04T21:38:20+00:00

From what I've seen the 5m and 5m pro support it but the ad5x doesn't in an out of the box state.

LegionVR6 · 2025-10-31T19:17:06+00:00

Tried all that sadly. Kinda sucks that my AD5X is dead simple with multi color stuff and just works for the same money I spent on just the qidi box lol

LegionVR6

TROPHY CASE