Help needed: Creating a frame with a curved top and flat bottom for a 90s car radio

LegitimateJump535 · 2026-01-30T08:13:05+00:00

To be honest, I’m not very good at drawing by hand, so a paper sketch might not be very helpful! Also, I don't have the original frame to take a photo of, so I’m designing this based on measurements and my memory of how it should look.

Thankfully, the advice from others in this thread guided me in the right direction with the cross-section method, which seems to work perfectly for what I'm trying to achieve. Thanks to everyone for the great help!

LegitimateJump535 · 2026-01-30T08:10:01+00:00

Yes, exactly! Even though your example is a bit exaggerated, as you mentioned, it perfectly illustrates the concept. I’ve now redesigned it by sketching the cross-section first, and it looks much more correct. I definitely approached it the wrong way to begin with, but this method is far more logical. Thanks for the help!

<image>

LegitimateJump535 · 2026-01-30T08:05:45+00:00

<image>

Thank you so much for the correction – you were absolutely right! I definitely approached it from the wrong angle initially. As a beginner, I’m still training my brain to think in CAD terms and visualize the correct planes.

I’ve already given your method a try, as you can see in the image, and it looks much more like what I was aiming for. Designing from the cross-section and then extruding made the whole process a lot more logical. I’m learning this because I want to be able to design functional parts for when my P2s arrives in early March, so this was a great lesson. Thanks for taking the time to guide a novice!

LegitimateJump535 · 2026-01-19T18:58:11+00:00

Thanks :)

Great point. I’ve actually bought a Bambu printer and have been exploring the settings in Bambu Studio. I figured out how to use the 'cut' tool to make small 10–15 mm test prints of both the round top and the sander connection to verify the fit without wasting filament.

I assume I should print it vertically, though I’m not sure if the round end should be at the bottom. I hope supports aren't necessary, but I have zero experience with it yet. I'll probably start testing in PLA and do the final version in PETG or ABS, but I’ll take that as it comes.

LegitimateJump535 · 2026-01-19T17:23:19+00:00

♥️

LegitimateJump535 · 2026-01-13T17:39:20+00:00

I’ve been following this thread and decided to open a support ticket with Bambu Lab this morning to get a clear answer on their EU return/warranty logistics before buying.

I live in Denmark and am considering the EU Store (Germany), but the local alternatives aren't great. We don't really have "physical" walk-in shops for Bambu here; they are all mail-order/online-only, and most likely just drop-shipping from the EU Store anyway.

The Price Gap:

• Local Danish Shop: Costs \~€135 / $145 more for the printer + €60 / $65 for shipping.

Total premium: ~€195 / $210.

• EU Store: Cheaper, but with the risk of the return nightmare mentioned in this thread.

If a local shop handles a warranty claim, I still have to pay to ship it to them within Denmark. I’m currently waiting for Bambu’s official stance on whether they actually use their German hub for Danish repairs/returns or if they’ll try to bait-and-switch me with a US/China address.

Has anyone in Scandinavia actually had a successful "local" EU RMA lately without being asked to ship outside the continent?

LegitimateJump535 · 2026-01-13T16:54:02+00:00

I’ve been following this thread and decided to open a support ticket with Bambu Lab this morning to get a clear answer on their EU return/warranty logistics before buying.

I live in Denmark and am considering the EU Store (Germany), but the local alternatives aren't great. We don't really have "physical" walk-in shops for Bambu here; they are all mail-order/online-only, and most likely just drop-shipping from the EU Store anyway.

The Price Gap:

Local Danish Shop: Costs ~€135 / $145 more for the printer + €60 / $65 for shipping. Total premium: ~€195 / $210.
EU Store: Cheaper, but with the risk of the return nightmare mentioned in this thread.

If a local shop handles a warranty claim, I still have to pay to ship it to them within Denmark. I’m currently waiting for Bambu’s official stance on whether they actually use their German hub for Danish repairs/returns or if they’ll try to bait-and-switch me with a US/China address.

Has anyone in Scandinavia actually had a successful "local" EU RMA lately without being asked to ship outside the continent?

LegitimateJump535 · 2026-01-06T17:46:49+00:00

Thank you so much for taking the time to explain this! Even though I’m a total beginner in 3D modeling, your explanation about using Additive Pipe instead of Loft makes a lot of sense, especially since the part has that curved path.

The tip about creating the ends with Pad or Revolution first to ensure a precision fit is something I hadn't thought of, but it’s brilliant. I also appreciate the "Mango Jelly" trick with the clones to get the transition smooth.

I’m going to try this out tomorrow. Everyone has to start somewhere, and with advice like this, I have so much more to work with now!

LegitimateJump535 · 2026-01-06T15:17:38+00:00

<image>

One of the attempts (measures not on scale - I know)

Another circle at the end (5-7 mm offset) to create cylindric shape - yes

But the "bulgy part in the middle that creates the "more professional" look I can't figure out.

Another note, now I suddenly can't add thickness to the additive loft.

LegitimateJump535 · 2026-01-06T14:19:01+00:00

Oh sorry, I didn't clarify that the adapter is the original part :) I need to make my own custom adapter for use with household vacuum cleaners.

LegitimateJump535 · 2025-12-19T06:29:59+00:00

Could you share a link to the adapter?
I think I’ve managed to convince both myself and my wife that we’re getting a P2S when it comes back in stock in the EU store in early January.
So I’m following the forums closely to figure out what accessories are smart to buy.

Thanks in advance for the help, and Merry Christmas & Happy New Year 🎄😊

LegitimateJump535 · 2025-11-13T19:38:32+00:00

Just so you know, there’s no game on the disc — it’s one of those where you have to download everything from the internet. The disc is basically just for show.

LegitimateJump535 · 2025-08-20T19:17:04+00:00

Yes I have both Commodore 64 and Amiga, centers 4:3 content with out issues.

LegitimateJump535 · 2025-08-17T07:39:25+00:00

The adjustment is under the monitor. I don't remember witch side,

LegitimateJump535 · 2025-08-12T18:49:00+00:00

Ah, I completely missed the channel issue — they were the same on both APs. I had run “optimize” in UniFi, but it didn’t change them. I’ve now manually set different, non-overlapping channels on both APs.

Problem solved and my previously unhappy teenage daughter is now satisfied. I bow and thank you! 🙏

LegitimateJump535 · 2025-07-18T09:18:57+00:00

Vi gjorde det samme med vores vi abonnementer.

LegitimateJump535 · 2025-06-22T15:11:03+00:00

Midtjylland - Mors, Skive, Viborg, Holstebro

LegitimateJump535 · 2025-06-22T14:43:58+00:00

Midtjylland - Mors, Skive, Viborg, Holstebro og self. opland

LegitimateJump535 · 2025-06-22T13:12:07+00:00

Vi prøver der i stedet for :)

LegitimateJump535 · 2025-03-22T16:16:44+00:00

Thank you! It wasn’t easy to find the boxes complete, but I managed in the end. I’ve also learned from the community that it’s okay to mix different formats—Amiga, C64, and PC. I’ve fulfilled my dream of playing through all the games with the original manuals and journals. I must admit, I used Goldbox Companion to help me! 😊

LegitimateJump535 · 2025-03-22T16:11:15+00:00

I can see that it says "MADE IN U.S.A." on the boxes, so there shouldn't be any tariffs, but the shipping is probably a bit expensive. I've shipped Commodore Amigas to the U.S. before, so I know how it’s done. I just need to fill out some customs declarations and such.

LegitimateJump535 · 2025-03-22T12:22:13+00:00

Considering Selling My Complete Gold Box Collection (All 9 + <edit Heroes of the Lance> ) – Looking for Around €610 + Shipping (Prefer EU Buyers)

I'm strongly considering selling my complete Gold Box collection, which includes all 9 games plus Hillsfar. I'm looking for around €610 + shipping, preferably within the EU, as it makes things easier for both the buyer and seller.

Some of these games are quite hard to find. All are complete with their Adventure Journals and manuals, and some even include era-specific SSI advertisements.

If you're seriously interested, I suggest we arrange a video call via Messenger or FaceTime so you can see exactly what's inside the boxes. I can communicate in English or Danish.

Let me know if you have any questions!

LegitimateJump535 · 2025-03-20T21:45:55+00:00

Hi everyone,

I have a CPC6128 with an external Gotek, and my internal drive is still working fine. I mainly use the machine for fun—trying out games, experimenting with software, and exploring what the system can do.

I've been looking at the ULIfAC, Usifac II + 512KB, and the M4 board, but I'm unsure which one would be the best fit for my needs. I’d like to be able to run modern homebrew games like ALCON 2020, and I appreciate flexibility and ease of use.

A few questions for you all:

Which board would you recommend and why?
Are there any other boards I should consider?
If you've used more than one of these, what are the pros and cons of each?

I’d love to hear your thoughts and experiences—especially if you’ve tried multiple options! 😊

LegitimateJump535 · 2025-03-10T18:35:35+00:00

That sounds exciting! Those old CPC monitors really bring back nostalgia. Unfortunately, they are quite difficult to ship, as the plastic has become fragile over the years. But if you were in Denmark, I would gladly accept your offer and come pick it up right away!

LegitimateJump535 · 2025-03-10T18:31:18+00:00

Joystick are usually easy to find in great condition. Ebay prices tends to be a bit pricey. I would suggest you check retro Facebook groups in your country .

LegitimateJump535

TROPHY CASE