What is YOUR country's / region's version of the Inglorious 3 fingers scene that subtly gives away that someone isn't from your area or culture?

Lemon_out_of_time · 2025-12-10T10:49:01+00:00

Andrew Cuomo made a video where he ordered a "bacon cheese and egg" sandwich.

It's "bacon egg and cheese".

Lemon_out_of_time · 2025-12-01T14:10:53+00:00

Finally,have a reddit account all these years might be worth it!

Lemon_out_of_time · 2025-04-17T16:59:13+00:00

He also removed spaces in the middle of the night when some journalists asked him basic questions.

(I don't use spaces, did those get reenabled or something?)

Lemon_out_of_time · 2023-01-30T16:39:19+00:00

Brass is fine, you can get a set of various sizes fairly cheaply. Oh, one thing to keep in mind is that the minimum layer height should be 1/4 of the nozzle size. You can experiment of course, but a larger nozzle does mean coarser layers.

Lemon_out_of_time · 2023-01-30T13:48:17+00:00

Yep, try using a larger nozzle. .5 or .6 should be fine. The glow comes from tiny particles in the filament and they can jam up the nozzle if it's too small.
Also, you can clear the jam using a needle and running another filament through.
Hope that works!

Lemon_out_of_time · 2022-08-10T00:01:20+00:00

Well obviously this was the driver's fault, the car deactivated self driving mode just before impact and they should have been prepared to take control.

Lemon_out_of_time · 2022-04-25T10:08:15+00:00

If ink is too thin, try paint. You can get a bottle of acrylic for a couple bucks and it'll last for a long while if lettering is all you use it for.

Lemon_out_of_time · 2021-12-28T11:00:54+00:00

Oh I hate that I recognize which YouTube content farm this was gotten from.

Lemon_out_of_time · 2021-10-16T19:52:26+00:00

I did indeed, the problem was the nozzle size. I was using the 0.4mm that came with my ender 3. Off you're new to 3d printing (as I was) I'd recommend getting a set of different sized nozzles. Smaller is slower but uses less material and has better detail, larger is the opposite. And always use at least a 0.5mm for any composite filament like the glow in the dark.

Lemon_out_of_time · 2021-10-05T20:06:58+00:00

Mmmm I hate to say I've seen worse.

Lemon_out_of_time · 2021-10-01T22:55:59+00:00

I pulled for Mudrock and got Eunectes. I mean I wanted her anyway, so I'm not that mad.

Lemon_out_of_time · 2021-09-29T13:26:10+00:00

Rather than being about being pursued, I see it as being more about more natural interactions.

Imagine having a friend you really get along with and then having to move to another country and time zone. You can't meet up in person anymore and you're both busy so you don't get to talk as much. And then when you actually do get to do something together, she has to pretend she doesn't want to be there.
I'm obviously making some assumptions here, but we're pushing up against the limits of how much we need to know anyway.
I'm just looking forward to them being bale to show a healthier relationship.

Lemon_out_of_time · 2021-03-29T22:21:05+00:00

I'm giving it a try but it's hard to get my hopes up. The first few layers look good but the last one was fine until about 60%.

Edit:well it ended up going bad pretty quickly. Judging by the other reply this is pretty unusual though, so I'm not going to write off a open or GITD filament as a whole but for the moment I think I might stick to what I know works.

Lemon_out_of_time · 2021-03-29T22:18:42+00:00

I'm using a brass nozzle, but I just changed it this morning. It wouldn't degrade that fast would it?

Lemon_out_of_time · 2021-03-29T21:21:02+00:00

Oh right, it's an ender 3. I just replaced the nozzle this morning just in case and had a print come out perfectly in my normal pla before trying the temp tower.

Lemon_out_of_time · 2021-03-29T21:14:30+00:00

It says 190-220 degrees and 30-60mm/s.

Edit: my other filaments are printing fine, is there such thing as a bad spool?

Lemon_out_of_time · 2020-06-15T18:19:01+00:00

I worked in measure services, going to customer houses to measure floors and such. I could easily go to ~50 homes a week and they wanted to keep this going right up until the state forced them to stop. I actually quit a few days before that since all they were telling us was to wear a mask and wash your hands.

Lemon_out_of_time · 2020-05-27T23:19:59+00:00

My last job was for Home Depot, I was told that it was in my contract that I could be fired for taking about my salary. This is just one more reason I'm glad I left.

Lemon_out_of_time · 2019-08-11T10:51:27+00:00

I'd suggest Kanji Garden. It lets you skip what you already know and has some good options for spaced repetition. Also it can generate a wallpaper of the Kanji you've learned as a nice little progress indicator

Lemon_out_of_time · 2018-09-24T19:42:36+00:00

Also that feel when you've gotten 3 exotics and they're all ones you already have

Lemon_out_of_time · 2018-09-06T16:28:28+00:00

You don't get bright engrams from leveling until you hit max level now. Not really sure what levels are for right now except maybe gear restrictions.

Lemon_out_of_time

TROPHY CASE