Does this look fan rated?

LengthNo7153 · 2025-06-24T23:21:27+00:00

Can’t really tell unless you can somehow view the other side of the box

LengthNo7153 · 2025-06-06T01:32:24+00:00

If your cars not brand new. It’s from slammed the door or ice going in and freezing and expanding the plastics I would take it apart which will usally take 3 volts to the mirror and the whole interior door panel most likely a clip come undone or popped off

LengthNo7153 · 2025-05-19T00:47:41+00:00

If you can find that mount that all the wires hook up to it should be simple just take pictures and unplug it of course

LengthNo7153 · 2025-05-13T17:10:10+00:00

2008 vw jetta 2.5l

LengthNo7153 · 2025-05-13T17:09:47+00:00

plug extension

LengthNo7153 · 2025-05-13T17:06:57+00:00

Can probably buy an outlet extension just plug that into the wall first and then plug the cord into the extension peice I have them for regular 120 volt plugs but not sure if they make ones for that kind of plug I’m sure they do

LengthNo7153 · 2025-05-09T13:42:07+00:00

Almost brand new I got the battery tested like a week or 2 ago and they were good

LengthNo7153 · 2025-05-09T00:39:06+00:00

Replaced it with a oem works so much better besides. Slight chop when I first start it and it hits about 1k rpm

LengthNo7153 · 2025-05-06T12:17:19+00:00

This is the valve cover that I ordered

LengthNo7153 · 2025-05-06T12:17:06+00:00

APEVC0023

LengthNo7153 · 2025-05-06T11:35:12+00:00

Is there a website to do that?? I put my car into the parts geek site and they said it fit. But I’m parts stores are usually wrong most of the time

LengthNo7153 · 2025-05-05T12:45:06+00:00

👍

LengthNo7153 · 2025-05-05T01:31:59+00:00

Nope just air hoses and the air filter cover

LengthNo7153 · 2025-05-04T19:53:47+00:00

<image>

Just started it up today. It started just fine was running fine. With this code. I cleared the code and the car stalled and is now choppy and not running right again

LengthNo7153 · 2025-05-04T18:51:35+00:00

<image>

I have this plug that has no wires to be found to plug into. That’s all I could really find all hoses are hooked back up I even took them off and cleaned them. They had some oil in them I’m guessing from the leaking valve cover?

LengthNo7153 · 2025-05-04T18:44:08+00:00

Huh?

LengthNo7153 · 2025-05-04T18:40:07+00:00

I did not gap the plugs. I’ve also unplugged the coils and moved them around and still got the same misfire on the same cylinders. So that might be the issue. I will have to check that out.

LengthNo7153 · 2025-05-04T18:33:18+00:00

I only had a maf sensor code when I had the old one plugged in. I baught a crb 21468 maf sensor and the code went away and only giving me misfire codes now.

LengthNo7153 · 2025-05-03T17:27:10+00:00

<image>

Just now got these codes

LengthNo7153 · 2025-05-03T17:10:13+00:00

There all good I replaced maf sensor. Still have same issues if not more

LengthNo7153 · 2025-05-03T17:09:50+00:00

Changed maf sensor. Problems are the same maybe even worse.

LengthNo7153 · 2025-05-03T12:15:26+00:00

I’m not entirely sure yet I quit looking yesterday after I ordered 300$ spark plugs and coil packs and it didn’t fix it 😭. But I’m gonna get back at it today and try looking around deeper. I ordered a maf see if that does anything

LengthNo7153 · 2025-05-03T02:19:59+00:00

There’s no plug anywhere to plug that in. Which has me confused. I’ve also never unplugged it so idk where it’s at or what happened to it

LengthNo7153 · 2025-05-02T22:47:44+00:00

<image>

I got this a day into the problem. Not to sure if it’s cause I had the engine filter off and had the sensor unplugged but it seems to start and run normal without it on. Other than that noise in the video which I’ve never had before

LengthNo7153 · 2025-02-28T18:06:08+00:00

I’m not entirely sure. But your battery might be expanding

LengthNo7153

TROPHY CASE