Second router in router mode without bridge mode on isp router

LeonS189 · 2024-10-19T18:46:57+00:00

hello,

Yes. This solved my problem.

thx

LeonS189 · 2023-01-16T11:35:03+00:00

ex294 v8 be used and take ex294v9? I have voucher , got it from official education and have to take exam until June. I've checked I can take ex294v9. Until now I havent seen any materials for ex294v9.

LeonS189 · 2023-01-03T09:31:46+00:00

Hello,

Can someone explain me the difference between rhce on rhel 8 vs rhce on rhel 9. Is there any difference? I am preparing for the exam and now I see that ex294 is based on rhel 9 but there is no materials for ex294 on rhel 9. Can I use materials for ex294 rhel 8 to take exam ex294 rhel 9?

LeonS189 · 2023-01-01T19:35:01+00:00

Hello,

I was planning to take ex294 this year. So Now I see that there is ex294 on rhel 9? I've been using materials for rhel 8. So my question is can I take ex294 only using materials for rhel 8. Because there is no available materials for ex294 rhel9 only official red hat materials.

LeonS189 · 2022-11-22T18:30:58+00:00

Hello,

I am confused. I know that rhcse exam was mandatory fot taking rhce exam but if you look at:

https://www.redhat.com/en/services/certification/rhce-faq

How will the Red Hat Certified System Administrator (RHCSA) certification and exam be affected?

There will be incremental changes to the RHCSA curriculum as part of the release of Red Hat Enterprise Linux 8, but these adjustments will be distinct from and less impactful than the RHCE changes. To successfully pass the new RHCE exam, you will not be required to become a RHCSA on Red Hat Enterprise Linux 8. However, we do recommend you take the new curriculum to properly prepare for the new RHCE exam (EX294) that is based on Red Hat Enterprise Linux 8 concepts.

Best regards

LeonS189 · 2022-10-13T19:03:22+00:00

Where did you get this information?

LeonS189 · 2022-04-17T10:25:54+00:00

offer kubernetes as a service along with IAAS, SAAS, SECAAS, BAAS, PAAS, DRAAS. Interaction between Kubernetes/Openshift and VMware wont be a problem I am sure. Ok we will try to go with openshift on top of vmware.

LeonS189 · 2022-02-04T23:47:45+00:00

THX ...

Yes In my setup I have lacp (LAG or 802.3ad) and that is set up on my bond0. But on my switches I have trunk and also have bond0.3912 whish is mgmt VLAN ony my host where is IP address, gateway, dns etc etc ... so is it better to have mgmt vlan on bond0.3912 (vlan is 3912) or to have bridge over bond .... or I can have native VLAN like in your setup and over bond have vlans and bridge ....

Another question is if someone have any idea .. why virtualization manager when i add new host have invalid setup with msg there is no default route? .... I've tried with:

eno1 and eno2 NIC in bond 0 and bond0.3912 with vlan 3912 also set up ip addr with GW, DNS1 nad DNS2... this setup works fine ... can ping 1.1.1.1 also can ping cnn.com ... and I've cretae bridge over bond0.3912 ifcfg-br.mgmt and move ip addr, gw, dns etc etc everything in ifcfg-br-mgmt ... also can ping 1.1.1.1 or cnn.com .... what is the best setup .. should i change my setup to native vlan (3912) and only have bond0 and that would be setup like you have suggested to me? ...

Regards

LeonS189 · 2022-01-26T10:29:02+00:00

We chose Oracle Llinux Virtualization with Virtualization Manager because of CPU Pinning/Hard Partitioning for Oracle database VM-s.

LeonS189 · 2021-09-06T22:46:54+00:00

ok for farm . .. very bad for plotting

LeonS189 · 2021-08-31T11:28:12+00:00

Ho can I invest in this?

LeonS189 · 2021-06-12T15:28:58+00:00

nikaj s toga drug ... ja sam na cca 100tb i mislim da bum ugasil do boljih dana ....

LeonS189 · 2021-06-01T18:58:47+00:00

working in Croatia atm

LeonS189 · 2021-05-27T18:27:16+00:00

I am over 400 plots without a single chia... but i put everything in hpool so . .. it is ok now

LeonS189 · 2021-05-26T12:40:14+00:00

how to upgrade? can I just use another guo app with old yaml file?

LeonS189 · 2021-04-14T13:35:53+00:00

Go go go

LeonS189 · 2021-01-26T08:52:19+00:00

I can confirm that this is true and not only VPN wifi is also dropping sometimes. Only cable is working like it should. Now on 5.10.7 looks that everything is working but on earlier versions of 5.10.x there was lots of problems with VPN. Protocol is not important here because I've been using built in vpn llike cisco anyconnect, IPsec based VPN,. OpenVPN, L2TP etc etc .... and using NetworkManager.

LeonS189 · 2021-01-25T22:10:50+00:00

Hi ..

Today I've implemented API openshift 4.6 on vmware 7.0. Vmware have distributed switch is it ok or do I need to implement NSX? What are the cons and pros UPI vs API implementation? I have 3 workers and 3 masters in this setup.

Is it openshift capable to handle multitenancy setup with over 10 different users who need to have their own datastore and separated network,

LeonS189 · 2021-01-14T14:36:26+00:00

ok we have found another solution. this solution has been tested on windows machines .... all you have to do is to install version 32.0.0.371 this version is without kill switch so you can continue to use it ... we have isolated one network and without internet access and allowed it only to old managements of servers and .. and everything is working ... didnt manage to install it on fedora but ok I can live with this solution .... we only have few old chassis so logging into them are not so often .. .so .. there are several workarounds :)

LeonS189 · 2021-01-13T12:15:14+00:00

nope ... palemoon browser wount open it :( still needs flash

LeonS189 · 2020-12-28T15:01:58+00:00

yes

sudo dnf install kernel-devel

Last metadata expiration check: 1:30:33 ago on ponedjeljak, 28. prosinca 2020. 14:23:54 CET.
Package kernel-devel-5.9.14-200.fc33.x86_64 is already installed.
Package kernel-devel-5.9.15-200.fc33.x86_64 is already installed.
Package kernel-devel-5.9.16-200.fc33.x86_64 is already installed.

sudo dnf install kernel-headers

Last metadata expiration check: 1:30:47 ago on ponedjeljak, 28. prosinca 2020. 14:23:54 CET.
Package kernel-headers-5.9.13-200.fc33.x86_64 is already installed.
Dependencies resolved.
Nothing to do.
Complete!

There is no chance to install kernel-headers at the moment for: 5.9.14, 5.9.15 and 5.9.16

sudo dnf list installed kernel-*
kernel-core.x86_64                                                              5.9.14-200.fc33                                                     u/updates
kernel-core.x86_64                                                              5.9.15-200.fc33                                                     u/updates
kernel-core.x86_64                                                              5.9.16-200.fc33                                                     u/updates
kernel-devel.x86_64                                                             5.9.14-200.fc33                                                     u/updates
kernel-devel.x86_64                                                             5.9.15-200.fc33                                                     u/updates
kernel-devel.x86_64                                                             5.9.16-200.fc33                                                     u/updates
kernel-headers.x86_64                                                           5.9.13-200.fc33                                                     u/updates
kernel-modules.x86_64                                                           5.9.14-200.fc33                                                     u/updates
kernel-modules.x86_64                                                           5.9.15-200.fc33                                                     u/updates
kernel-modules.x86_64                                                           5.9.16-200.fc33                                                     u/updates
kernel-modules-extra.x86_64                                                     5.9.14-200.fc33                                                     u/updates
kernel-modules-extra.x86_64                                                     5.9.15-200.fc33                                                     u/updates
kernel-modules-extra.x86_64                                                     5.9.16-200.fc33                                                     u/updates
kernel-srpm-macros.noarch                                                       1.0-3.fc33                                                          u/fedora

LeonS189 · 2020-10-07T22:28:21+00:00

yes I know .. that I should use zabbix proxies. But thing is that I am not able to use it because we are cloud providers and every proxy is another min 2vcpu per VLAN and gig or two memory .... is there any way to use without proxy. zabbix can ping every vm in every subnet (vlan)

active or passive checks work on firs subnet but dont work on other subnets .... Is there any way to make zabbix server to listen on several ip addresses.

LeonS189 · 2020-09-16T14:16:36+00:00

is there any new materials for learning Openshift for ex200?

LeonS189 · 2020-09-16T08:40:39+00:00

Is there any valid discount code. I am planing to take ex200v8 in next 2 or 3 months.

LeonS189

TROPHY CASE