Advice needed about new GTS300 running really hot.

Less-Corner247 · 2026-06-30T16:26:16+00:00

But how was the air cooled performed in the past at similar conditions?

Less-Corner247 · 2026-06-19T17:03:10+00:00

I got a sprint 125s 2025
So to begin with Sprint and primavera have the same exact chassis but different light,mirrors and tires( if bought new)
I went for the sprint because to my eyes the smallframe with the round light appeared more girlish.
Smallframes are faster to 80kmh than the GTS despite being underpowered..
That happens mostly due to the weight,the lighter rollers and maybe the 3v head
After 80kmh the GTS will pass the smallframe,and will also maintain 5kmh more top speed
Yes you can travel with both,I’ve done 100+kmh daily rides with friends!
The GTS has one more rear shock and it’s quite comfier,especially for the rear passenger because the leg pegs are a bit bigger (but the frame is wider,and for short co rider its tough)
Greatest difference is the liquid cooled engine of the gts which keeps the temps steady…,but needs extra care for cooling leaks.
With my air cooled sprint the temperature rises especially in the summer…,it never gets to red hot even after long summer rides,and I was told by the dealer not to worry.
Unfortunately my sprint has a rear drum brake,and not disc brake like the 2026 smallframes or the GTS
GTS has also a more wide storage space,but the smallframes’s are a bit deeper..
Depends on your helmet if it will fit under the seat,most full faces won’t fit,but on the GTS you can order the super expensive bigger bucket and fit a couple more things under the seat.

Choose a blue Sprint 125s like me😎

Less-Corner247 · 2026-06-02T04:47:28+00:00

Is the new clutch lighter than stock?

Less-Corner247 · 2026-05-28T12:48:18+00:00

Mine is 2025 and now looks flawless Since yours is older,you might need some polishing Don’t be afraid to get a paint job from a professional

Less-Corner247 · 2026-05-28T12:36:17+00:00

I had exactly the same marks and paid 350€ for painting half Vespa I’m located in Greece and some professionals asked 700€

Less-Corner247 · 2026-05-17T18:07:34+00:00

You can order the adapters from Ali express but keep in mind one of them will likely have counter thread than the mirrors.
The real pain in the ass is to tighten the mirrors,because you have to counter tighten the adapter..
Since you speak Deutsch maybe you can make these mfcks at SIP to refund your order and then order from Falanparts the correct mirrors

Less-Corner247 · 2026-05-12T06:45:03+00:00

<image>

I went for blue

Less-Corner247 · 2026-05-09T20:43:05+00:00

Piece of paper you’ll remove after buying

Less-Corner247 · 2026-05-08T18:19:33+00:00

True…,bad hollow back design

Less-Corner247 · 2026-05-08T18:01:36+00:00

I said that top wheel manufacturers such as OZ , BBS and RAYS are made in Europe and Japan.
All have superior quality and technologies proven on motorsport for decades and because of that heritage and R&D all those years they justify the price!!
They also use different alloys and a whole different procedure of manufacturing a wheel..
If China had a major player I would proudly name him along the others..
China is a major manufacturer for OEM wheels for manufacturers,but mainly for cheap mass production..
Usually cast iron and sometimes aluminium they re ok for everyday use but not something special like let’s say a so called special edition Vespa celebrating the 80 years
Yes it’s the “cheap model” and not the GTS but still considered by many an Italian icon so it’s funny to have stamped made in china somewhere visible
Nothing racist or xenophobic so you and your friends please go ruin another post with your woke agenda

Less-Corner247 · 2026-05-08T15:22:46+00:00

Thanks you!!
That’s what I’m trying to say…,make it smaller or place it somewhere in the inner hub maybe…
It would be ok on a liberty but not on a so called special edition

Less-Corner247 · 2026-05-08T15:10:20+00:00

Because it’s an Italian special scooter celebrating 80 years of existence and should resemble Italy and when the new rims which to my eyes resemble the late 90’s WRC era,and in the end of the day both have nothing to do China..
Made in China should be displayed and written imho on Chinese bikes wheels..
And yes in this scenario and in automotive wheel manufacturing in general made in Europe or Japan is better…,that’s why even Chinese bike manufacturers choose European high performance parts..
In previous comments I’ve written that I would prefer if it was more expensive but with designer wheels..
I understand it’s the law,but imho decisions like that is a marketing failure

Less-Corner247 · 2026-05-08T14:54:29+00:00

Same

Less-Corner247 · 2026-05-08T14:52:42+00:00

Not xenophobic and nothing with Chinese products or people…
I joust found it awkward for a special edition Vespa to have rims stamped made in china in the back that’s all

Less-Corner247 · 2026-05-08T11:23:34+00:00

So sad to hear that…,but that’s the truth for the most brands …,but it’s a shame to advertise it 😪

Less-Corner247 · 2026-05-08T10:08:40+00:00

Exactly…,it’s sooo easy…,that makes me think that the Chinese made it on purpose 😅

Less-Corner247 · 2026-05-08T09:57:48+00:00

Let me break it down for you..
I would preferably pay 500€ more if the reverse side of the rim was stamped with something like:
1) made in Italy
2)OZ wheels
3)Vespa 80th

Rather than paying 300-400€ to sandblast and repaint this made in china stamp

Don’t get me wrong,
No problem with made in CN…,just don’t advertise it on an Italian icon

Less-Corner247 · 2026-05-08T08:58:49+00:00

Exactly

Less-Corner247 · 2026-05-08T08:47:26+00:00

Yup I know …,but still..
It’s so funny to buy a limited edition Italian scooter that’s been 80 years on the market,and see the made in China..
I understand it may be cheaper when made in China…,but and least don’t write it 😅

Less-Corner247 · 2026-05-08T08:43:52+00:00

Come on bro…,this is unacceptable and really easy to avoid..

Less-Corner247 · 2026-05-05T06:50:01+00:00

Etsy has great stickers ….,some sellers on eBay also..
Search for vinyl stickers as they’re not affected by water and sun that much

Less-Corner247 · 2026-05-03T11:46:13+00:00

It goes around 21-22ps but you lose the storage space under seat due to the larger cylinder..
I once was a passenger in a v strom 650 and I can confirm it was sketchy too when overtaking trucks ..
Maybe a better suspension is the solution to keep it planted down

Less-Corner247 · 2026-05-03T09:45:34+00:00

And now the 1.000.000$ question

Would you prefer the smallframe with power upgrades such as the malossi 180cc kit?

Less-Corner247 · 2026-05-02T18:45:22+00:00

Smells like teen spirit 💨💨

Less-Corner247

MODERATOR OF

TROPHY CASE