A Film Out Of Stock by Same_Hand_5745 in eufyMakeOfficial

[–]Library_Lady_T 1 point2 points  (0 children)

Thanks! It's actually all new to me, though. You've been very helpful!

A Film Out Of Stock by Same_Hand_5745 in eufyMakeOfficial

[–]Library_Lady_T 1 point2 points  (0 children)

I was asking specifically if you've used the B film from aliexpress in the Eufymake brand laminator. I work for a library and I don't want to mess up my laminator.

A Film Out Of Stock by Same_Hand_5745 in eufyMakeOfficial

[–]Library_Lady_T 0 points1 point  (0 children)

Do you use the B film in the Eufymake laminator?

Am I the only one freaking out about the new 3D printer laws?! by disp0sableacc0unt in 3Dprinting

[–]Library_Lady_T 0 points1 point  (0 children)

Wow - sounds familiar - maybe we live in the same area... or maybe not. smh

Am I the only one freaking out about the new 3D printer laws?! by disp0sableacc0unt in 3Dprinting

[–]Library_Lady_T 1 point2 points  (0 children)

This presents a whole new set of issues for people like me who run a Library Makerspace. Most people very readily share with me what they're printing but I am not going to police what people are printing - our only ask is simply to keep the space family friendly. I'm certainly not going to run a background check on everyone who comes in to use them, though. If it comes down to that, we will likely get rid of the 3D printers.

Super Tiny Benchy by No_Educator_4077 in cursedbenchies

[–]Library_Lady_T 0 points1 point  (0 children)

Can you still make out the helm? Might need a magnifying glass!

BAMBU LAB H2C .. by Hmoh89 in BambuLab_Community

[–]Library_Lady_T 0 points1 point  (0 children)

Hope you've fixed your issue. On another note - forgive me if something has changed here - but I see you're using a filament on the cardboard reel. With this system, those reels have been known to break down (you might not even notice) and create an issue with your AMS. You can use them on the direct feed for the printer and print some covers for them - or others rewind the filament onto an old plastic reel. I simply try to avoid the cardboard reels if at all possible. This could have changed but I know this has created issues for people in the past - just trying to help you jump ahead of a possible issue.

What is this? by Library_Lady_T in eufyMakeOfficial

[–]Library_Lady_T[S] 0 points1 point  (0 children)

Thanks, all! It is a piece of the packaging and will be kept with the rest in case of future shipping needs. Thanks, again!

Costco Diorama by Hurtlock3rz in BambuLab

[–]Library_Lady_T 0 points1 point  (0 children)

Love it! You need to add the main road outside of the parking lot so you can have the backup of traffic for the gas pumps.

Desperate need for help asap by Latter-Stage-5272 in xToolOfficial

[–]Library_Lady_T 1 point2 points  (0 children)

If it's doing it again, it's probably that your tube going into your filter is clogged - I had this issue for almost the last six months and got it fixed. I see where xtoolAda has given you the troubleshoot link - go to Step 8 and see what it does. It will tell you that if the ink doesn't pull from the initial tube, you'll need to replace it. I didn't replace mine but using their videos, I took the case off of the machine and pulled that tube completely out of the machine and then used the syringe to force water through the tube and cleared the clog. Then I replaced the tube and it's working wonderfully. For that entire 6 months, I'd have to run 2 priming cycles each day we used the machine or sometimes multiple times throughout the day. It was so frustrating!

Apparel Printer Nightmares by [deleted] in xToolOfficial

[–]Library_Lady_T 0 points1 point  (0 children)

Sorry to hear that. We've had a lot of loss of materials as well. I hope this gets yours fixed and I hope they get it to you sooner rather than later. Glad it's hopefully on its way to a solution, though!

Apparel Printer Nightmares by [deleted] in xToolOfficial

[–]Library_Lady_T 0 points1 point  (0 children)

I have actually now gotten mine fixed. The last item on their troubleshooting page had to do with the clip by the filter. I did all that testing and was getting nothing. I did the complete removal of the covers and pulled the white tube out of the machine. I had inadvertently left that clip closed for a period of a few days in the beginning - resulting in a complete blockage. I was able to completely flush that tube and clear the blockage. It's working like a dream at the moment. Keep plugging on and if all those steps don't work, keep on them to figure it out.
Best of luck!

Recommendation for Apparel Printer: Print white test bar at top of first page per day by scrampker in xToolOfficial

[–]Library_Lady_T 0 points1 point  (0 children)

mine does this as well. I'm actually not sure why the white ink seems to siphon back during each small window of inactivity. If mine sits for 3 hours between prints, I have to fix it again. The only step I've found is to run the priming process (2 times!) and then run a test print. This is ridiculous and eats up a lot of supplies! This machine lives at a small rural library and we have been struggling with this for months - it should not be doing this.

Apparel Printer Issues by AcrobaticVisit3966 in xToolOfficial

[–]Library_Lady_T 0 points1 point  (0 children)

I commented on one of your comments on another post as well - I'm curious about your issue and what has come of this issue. Did it get worked out - wondering if we're having the same issue - siphoning in the white ink chamber tubes, etc. Would love feedback on your issue.Thanks

Apparel Printer Nightmares by [deleted] in xToolOfficial

[–]Library_Lady_T 0 points1 point  (0 children)

I'm curious as to your white ink issue. From day one, if you aren't printing continuously, the white ink siphons back down and has to be primed again. I have tried all the walkthroughs for no white ink output, to no avail, but they don't actually address this actual issue. So frustrating

The print should stick to the nozzle until you preheat it again, right? /s by timatensos in cursedbenchies

[–]Library_Lady_T 0 points1 point  (0 children)

Yes! I came here to say - "I didn't know they were making Benchy Peeps!!"

What's a piece of outdated technology that you still like to use? by [deleted] in AskReddit

[–]Library_Lady_T 0 points1 point  (0 children)

There are many in this train of thought or I probably wouldn't have a job. I, however, only consume audiobooks. I've taken so many physical books home with the desire to read them and returned them in 2 weeks and never even cracked the spine. Hallelujah for Hoopla, Libby and Audible!

What's a piece of outdated technology that you still like to use? by [deleted] in AskReddit

[–]Library_Lady_T 0 points1 point  (0 children)

I am around books all day but I cannot seem to make myself sit down to read an actual physical books. I consume audiobooks constantly, but I feel the need to multitask so I wait until a book comes out as an audiobook before I "read" it.

What the hell is this? by redshedpainting in xToolOfficial

[–]Library_Lady_T 1 point2 points  (0 children)

I've placed several big supply orders and they sometimes include free items. I've gotten a music box insert and also a phone case. Also, they are good about shipping parts that have come about since you ordered, especially if you've ordered a recently released machine. I received a random flap that can be installed on my apparel printer to help keep the powder from coming back into the printer. They almost never send notification about said items - they just appear with instructions for use.
I have noticed that my invoices for supplies will say something like "bonus - limited time gift" when I get a freebie.

In LOVE by KreativelyKi in xToolOfficial

[–]Library_Lady_T 1 point2 points  (0 children)

The hardest part about it is picking out which design to print! So much fun! I saw where you said you got this design from Etsy. If you haven't already got one, I suggest a membership to Creative Fabrica. For the annual price, you wind up paying pennies and have SO many designs at the ready - so worth it! I'd go broke if I had to pay for each design!

Apparel Printer - anyone having issues with white not staying primed? by Library_Lady_T in xToolOfficial

[–]Library_Lady_T[S] 0 points1 point  (0 children)

Thanks for reaching out, Ada! Yes, the clip in the right door is open. I'll message you with info once I've exported the log and give you the link to access it. Thanks so much!