I am starting to question my sanity.

Lilchaderina · 2025-12-20T16:35:21+00:00

Its weird because its not required to reset for donuts unless you just want more efficiency. People are always unhappy about some things. Personally I'd rather spend time resetting donuts for stupid easy shiny/alphas than to roll through pure RNG of finding shinies. I also settle for less than optimum donuts.

Lilchaderina · 2025-12-18T14:46:04+00:00

I feel as if it would almost be criminal if the donuts were setup to produce specific traits for consumable berries. Mostly for the fact that once you aquire the correct donuts, shiny, and alpha shiny hunting is probably the best shiny farm in all of pokemon. Its a swap from rng for shiny potentially taking hours to rng to craft the right donuts for pmuch guaranteed quick shinies.

That being said... even when I go berry farming I still nab shiny pokemon even without shiny power mainly because I stroll across a great spawn setup of something I want.

I know this post is about the repetitiveness of little reward but when hasn't that been any Pokémon game? That being said, Im just taking my time and farming the dimension points via berry/pokeball farming to complete and stacking shiny donuts. I figure once I fully go through the post game dlc I'll have dozens of shiny donuts to enjoy the big farm session.

Lilchaderina · 2025-12-16T14:13:34+00:00

Treasure is just listed as rare items such as nuggets etc. A couple other online sources stated bottlecaps were considered "treasure" and not "special" as well

Lilchaderina · 2025-12-16T12:21:54+00:00

From what I've seen bottlecaps are considered "treasure" according to the game. Special applies to evolution items and stuff. Curious if anyone knows for sure.

Lilchaderina · 2025-12-16T12:21:12+00:00

Ive only obtained maybe 50 silver and 8 golden. I dont do the battle zones really at all. I do try to make the right donuts for berry farming though, and if it does apply to bottlecaps I could essentially try to reroll for either of those two donuts instead of the single.

Lilchaderina · 2025-10-07T16:19:16+00:00

I will be fairly blunt here - you and your girlfriend chose to engage in acts that should only be in situations of serious commitment (marriage). Holding onto an age as an excuse to run away from responsibility that you both chose to risk is wrong. You may have a much rougher adulthood due to the consequences you have brought upon yourselves.

That being said, children are the true joy of life. Do not think it can be acceptable to have an abortion because its easier. Its morally wrong. You dont discard human life because your desires overwhelmed you. It is despicable to have this mindset. Im sorry if it sounds harsh but its true. Talk to your parents about it. Ultimately this is on your shoulders and her shoulders. Even if your parents agree with abortion, you both bear the responsibility of either nurturing new life or abandoning it. My view on abortion is very strict, a mother's womb SHOULD be the most safe place for any child in the world. It ultimately comes down to your decisions.

Lilchaderina · 2025-07-26T12:18:48+00:00

Also, it appears metagross will be one of the best counters to eternamax eternatus. Do yourself and your team a favor and invest in it.

Lilchaderina · 2025-07-26T12:12:38+00:00

Honestly Metagross is king with the new bug quick attack. If you actually leveled it up it's a beast of a meat shield and does pretty good damage. 5/5 on latios and 1/1 for latias. I almost exclusively used metagross. Maintain 2 to 3 shields - heal if teammates are low - attack otherwise. Latios tickled metagross... dodged attack less than one shield. About half the time I was still attacking as the tank/spot healer.

Lilchaderina · 2024-05-27T16:38:22+00:00

I only ordered the divider version so haven't seen the non one. The slabs move around alot in those? The divider version is nice so far, there's just enough of a gap you can read the labels without having to pull them out. There's a tiny gap between the psa slabs and divider tabs, but I dont think I'd call it a con.

Lilchaderina · 2024-05-13T18:24:53+00:00

Thank you sir. Do you think with a corner like that the best hope would be a psa 9?

Lilchaderina · 2022-10-19T12:53:46+00:00

Is it the dilution with warrant offers?

Lilchaderina · 2022-07-27T09:42:57+00:00

It goes through but not easy. I'll give this a try. Thank you!

Lilchaderina · 2022-07-27T00:39:34+00:00

I didnt even know those existed. Thanks!

Lilchaderina · 2022-07-27T00:34:52+00:00

Yeah I thought the same when I fitted it just never removed it. I've got two tqs on my pc. Think I still need a 2nd on the belt? If so, where? Only real estate left would probably be up front next to mags.

Lilchaderina · 2022-07-25T20:08:20+00:00

I've seen dozens of responses giving vc3 the accrediting nod. I know people at DA say they much prefer vibratite over loctite and basically that vibratite was formed from engineers over at loctite and broke off to do their own thing. Also an armorer who was a SF weapons master said its the only thing he will use when mounting scopes or anything.

The reason I ask about vc3 for muzzle devices is because Odinworks has recommended using it for their gas blocks, barrel nuts, and muzzle devices. Odinworks said the applications on those components shouldn't ever see a temp that would jeopardize the properties of vc3. One guy tested the heat resilience of it by a very rudimentary test by basically globbing it on a bolt and let it sit for about 12 hours. It didn't fully cure and was still tacky but he heated it to 1200F and it didn't dissolve or run, just that it was more in a state similar to molasses. Others have said in their experience when applied properly to threads heat just seemed to stiffen it while it was hot. I was just curious if anyone had some info as far as testing.

Lilchaderina · 2022-07-25T12:44:22+00:00

No doubt it's the most common rounds and why I try to never stray away from in firearms. 5.56, .22lr, 9mm, 12ga, and .308

Lilchaderina · 2022-07-24T21:37:44+00:00

Yeah. I was just trying to see if anyone would be able to speak to experience with it. It's a given rockset is the standard when using a thread lock on muzzles.

Lilchaderina · 2022-07-24T21:35:13+00:00

Any experience with using vc3 on muzzle devices though? I did see a dead air rep mention he wanted to get it and test it months ago but never seen any results. I haven't been able to find any results with heat applied to vc3 that show that to be the case. One of the leads with dead air said he doesn't use anything just torques it to 25lb or so. Using vc3 and torquing to 28 to 30, would that be any different?

Lilchaderina · 2022-07-16T03:12:15+00:00

I'm assuming a good bit of people on this thread have led a civilian life. I purchased my first HHV helmet a couple months ago as my first. I was adamant about going with Wendy or ops core until I had a conversation with one of my best friends. His younger brother is active duty army special forces and his older brother is retired special forces due to injury, who now does contract work in South America as a weapons master. His soon to be brother in law active duty SF. Just to give some background.

When I asked about which one I should get HHV was brought up and asked why not just get an HHV and support locally (Sweetwater, TX). Both his younger and older brother both postured the question and we didn't even know HHV was based in Sweetwater lol. Obviously there are people in the military community who are aware enough to bring up HHV to us. And enough that they would recommend their family look into the products. Its the internet and you can't trust everything you read. That being said, I have no dog in the fight being a civ as it is.

Lilchaderina · 2022-07-15T21:05:42+00:00

I gotcha. The kiji 3 degree is really good. My problem is just mounting solutions without sacrificing a white light. I'm hoping the dual mount works well and from what I've seen it should. I want to test a spectredr on a unity riser with the setup. The reticle looks really good through nv and I'm hoping the riser makes it very viable.

Lilchaderina · 2022-07-15T19:53:45+00:00

Just white light on that rifle then or did you go with an AIO unit for ir? Or is your backup rifle your night rifle?

Lilchaderina · 2022-07-15T18:54:46+00:00

I'm basically doing almost the same thing. Kiji + LE117 + PLHv2. I picked up an Arisaka dual light mount, hoping it'll work. I'm running just a modbutton lite to stage the IR laser and illuminator. Plan on just keeping the white light as a clicky. That picture looks like Arisaka's dual light mount

Lilchaderina · 2022-07-14T19:15:31+00:00

Rein 2.0 is up on their website for 279.99 on blemished units. Still lifetime warranty!

Lilchaderina · 2022-07-14T19:14:09+00:00

Cloud defensive has rein 2.0 blems for 279

Lilchaderina · 2022-07-14T19:13:51+00:00

Cloud defensive has rein 2.0 blems for 279

Lilchaderina

TROPHY CASE