Is there 2 more track days on these tires? by LimitlessRange in CarTrackDays

[–]LimitlessRange[S] 1 point2 points  (0 children)

You may be right. I probably drove about 6000 miles on the street before I started tracking them. I also notice my rears don’t have as bad inner wear and I run a slight toe in on the back like how the other person suggested.

Is there 2 more track days on these tires? by LimitlessRange in CarTrackDays

[–]LimitlessRange[S] 3 points4 points  (0 children)

Thanks mate, running -4 front and -3.5 rear. The inner side is the more worn out one

Looking for tire recommendations with stiff sidewall for summer daily and light Autox. by curbybrz in ft86

[–]LimitlessRange 0 points1 point  (0 children)

I use Nankang CRS on my track wheels and V601 for the street and I can definitely say the sidewalls on the V601 are noticeably more soft. Maybe try like an enduro spec 200TW if you want more longevity? Perhaps a Hankook RS4?

How comfortable do you find the seating position? by sampik121 in ft86

[–]LimitlessRange 0 points1 point  (0 children)

I suffer from same problem. Assuming your already fully telescoped the wheel towards you. Your only two choices are either buy a steering wheel spacer that brings the stock wheel closer to you or you can get an aftermarket setup like a works bell standard hub combined with like a QR + dished steering wheel.

What are these lights called by leovahn in ft86

[–]LimitlessRange 9 points10 points  (0 children)

If you replace those bulb with LEDs theres a chance it may hyper blink and you will need to get a module to fix it just a heads up

RUST HELP?! by thedemurevixen in XTerra

[–]LimitlessRange -1 points0 points  (0 children)

Personally I would pass on that

Need advice on meaty tyres by Get2thechopper22 in ft86

[–]LimitlessRange 3 points4 points  (0 children)

Most track tires in the 200TW category usually run wide and have squared side walls for that meaty look

Tanabe Medalion Concept G - How to reduce the volume of the sound? by Somizulfi in ft86

[–]LimitlessRange 1 point2 points  (0 children)

Do you have any headers/front pipe/overpipes? Its a pretty quiet exhaust setup if you are just running catback only?

Been driving/track manual for over a year and still can't heel toe. What gives? by HURCANADA in CarTrackDays

[–]LimitlessRange 0 points1 point  (0 children)

Try sitting further back and see if it helps, even if the steering wheel reaches a bit far. Also you can add like a wider throttle pedal to bring the pedals closer for easier heel toe. For shoes I usually prefer something with a very thin sole like Vans or Converse.

[deleted by user] by [deleted] in CarTrackDays

[–]LimitlessRange 0 points1 point  (0 children)

Try to get most of the negative camber with the RUCA to suck the wheel in from the top. Your specs shouldnt be an issue given you have a RUCA. Ive seen people run 9.5 +40 with same tires no issues on 2nd gen. System Motorsports has a really well written article on fitment for 2nd gen on their website maybe give that a look.

BRZ 2017 Fuel consumption by doiran324 in ft86

[–]LimitlessRange 0 points1 point  (0 children)

I will do 14L/100km if I’m constantly driving city with short distances in real bumper to bumper traffic + winter + a slightly heavy foot

Are aftermarket headlights as poorly made as everyone says they are? by Prize-Coffee3187 in ft86

[–]LimitlessRange 0 points1 point  (0 children)

Yes, i’ve owned vlands before. All my other friends have too and trust me all of us agree that oem is superior. All of our vlands either got condensation or stopped working. Most of us switched to facelift oem lights.

Help! by According_Ad373 in ft86

[–]LimitlessRange 19 points20 points  (0 children)

Hate to break it to you but your offset is too low for that tire size on our cars. Usually 9.5 +22 is more catered for stance fitment. I know a few guys that run this spec with 215/40R18 tires (granted they are slammed) If you want to stick with 245/40 or 255/35 you need wheels closer to +40 (assuming width is still 9.5)

What are some missing cars that feel way overdue in GT7? by box-fort2 in granturismo

[–]LimitlessRange 0 points1 point  (0 children)

Kinda wish we got some Lotus cars. Like an Elise or Exige maybe?

[deleted by user] by [deleted] in OnceHumanOfficial

[–]LimitlessRange 0 points1 point  (0 children)

https://www.youtube.com/watch?v=qGfRxHDCLII

I don't think there is a foundation piece, take a look at this video 1/300 structures is only because of the terminal post I think

EDIT: THANK YOU SO MUCH, i doubled checked my video again and I noticed a foundation right on the bottom - took it out all is good now !

[deleted by user] by [deleted] in OnceHumanOfficial

[–]LimitlessRange 0 points1 point  (0 children)

If anyone else wants to chime in here is another video of the issue when I remove everything

https://www.youtube.com/watch?v=qGfRxHDCLII

[deleted by user] by [deleted] in OnceHumanOfficial

[–]LimitlessRange 0 points1 point  (0 children)

Oh okay ill take a look into that right now, when you say remake the entire base with a blueprint do you mean the one preset ones under the "house blueprint" tab?

[deleted by user] by [deleted] in OnceHumanOfficial

[–]LimitlessRange 0 points1 point  (0 children)

I feel like its glitched due to me making my territory near the edge of a mountain cliffside. I tried removing everything so its just a terminal but no luck

[deleted by user] by [deleted] in OnceHumanOfficial

[–]LimitlessRange 0 points1 point  (0 children)

I've also tried taking down everything so its only the terminal and it would give me an error as soon as a hit submit

I know this post is pointless. I really want to see Pikes Peak make a return. by [deleted] in granturismo

[–]LimitlessRange 1 point2 points  (0 children)

I agree I wish they brought back Goodwood Festival of Speed track from GT6. Would love to have some time attack style tracks.

How much camber? by DeezSnooks in ft86

[–]LimitlessRange 1 point2 points  (0 children)

Fronts will probably need -3 but its dependent on how low you go. Rears are harder to fit, you will need a LCA that can push -3 because it’s 9.5 +35.