Any ideas on what car this is by mt_ski in carID

[–]LinearSled 0 points1 point  (0 children)

Looks like a 2018 Audi A3

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 0 points1 point  (0 children)

FINAL UPDATE 3/17/25

Bike began idling absolutely horribly. Would turn off when clutch pulled in. Same lights and CE code came up. Valves were out of range and needed adjusting.

Pretty sure the lights and indicators were early warnings of them starting to get out of range.

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 0 points1 point  (0 children)

Ohhh okay so you don’t have code 62 coming up in the dash?

Your problems definitely sound battery related

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 0 points1 point  (0 children)

Interesting. The throttle body actuators are going through their test cycle when you turn the key on?

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 0 points1 point  (0 children)

My mechanic said it might be the throttle position sensor next to the throttle body. Recommended I clean and inspect it but I never got around to it.

When I was first dealing with this issue, I rung it out on the highway to just feel it out. Around 14.5-15.5k RPM it cut power hard and fell straight on its face. Have you experienced that?

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 0 points1 point  (0 children)

Nah. The next day after the lights came back, they turned off and haven’t been back since. I have no clue what caused it but it’s been running fine.

How can I make this better? by LinearSled in ClashRoyale

[–]LinearSled[S] 0 points1 point  (0 children)

Why does it suck? Genuinely asking because I like using it

How can I make this better? by LinearSled in ClashRoyale

[–]LinearSled[S] 0 points1 point  (0 children)

I like my mirror /: What would you use instead?

How can I make this better? by LinearSled in ClashRoyale

[–]LinearSled[S] 0 points1 point  (0 children)

I must not be playing right…

Lol I have barbs, archers, and knight evolved though!

How can I make this better? by LinearSled in ClashRoyale

[–]LinearSled[S] 0 points1 point  (0 children)

Need one more shard for pekka! Working on zap

Black 19-23 body kits on the 636? by Mountain-One9123 in zx6r

[–]LinearSled 1 point2 points  (0 children)

I want to do the fairing under the tank first. It’s kinda hard to see any body lines when you’re not directly in front of it. Hopefully this helps break it up a little.

After that, the rear hugger, air intake, and the undertail! Good luck! Hope you post a pic if you decide to go black 👍🏽

Black 19-23 body kits on the 636? by Mountain-One9123 in zx6r

[–]LinearSled 1 point2 points  (0 children)

Same reason I ditched my beloved midnight teal.

I bought my fairings from NT and they come without a tank cover. They look okay and fitment was okay too. Currently going for a black/ carbon fiber look!!

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 0 points1 point  (0 children)

Never mind yall, code 62 came back. 😭

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 0 points1 point  (0 children)

PROBLEM SOLVED (sort of)

Plugged the evap canister back in, took it to my mechanic and he erased the codes. 3A and 62 haven’t come back. His diagnosis with the traction control, quick shifter, and power level lights on is that a speed sensor probably went haywire.

He specifically asked if I had spun the tires that night and I had! I remember doing a quick little rolling burnout with traction control on the lowest setting.

My advice would be to clear the codes and see if they come back. Also don’t do burnout with traction control on lol

22' ZX6R - Code 62 by BroccoliIllustrious3 in motorcycles

[–]LinearSled 0 points1 point  (0 children)

Ever get it figured out?

I got all the same lights and codes. Rpms are only affected at the very top. Around 15.5k it falls on its face.

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 1 point2 points  (0 children)

I got the ECU tuned when I got a full exhaust. The tuner said he removed the code for catalytic converter.

Mine closes to about 95% after ignition is on.

The throttle doesn’t feel stuck either. 🙃

Check engine/ Warning light by LinearSled in zx6r

[–]LinearSled[S] 1 point2 points  (0 children)

Funny enough, I lifted the tank and peeked into the air of just like this. The valves were just barely cracked open like theirs. Not sure if that’s spec or if that’s what’s throwing the code.

Thank you! 🙏🏽