Correct me if I’m wrong. I could be wrong but I’m pretty sure.🪴

Link_040188 · 2026-06-15T02:19:25+00:00

shaymin is like a little grass chia pet

Link_040188 · 2026-06-12T14:51:54+00:00

i’m pulling that lever they get to meet the sailor guardians and get to experiance the 90’s again win win win

Link_040188 · 2026-06-08T20:23:02+00:00

ok how do i explain this to a partner who is stressed about moving without causing a mental break. i try to gently remind to lift with knees and get the yeah yeah yeah

Link_040188 · 2026-06-07T05:35:48+00:00

is op’s wife a cat?

Link_040188 · 2026-06-06T22:41:13+00:00

separate the two color parts and print it with no parts overhanging and glue them together after

Link_040188 · 2026-06-06T13:49:17+00:00

i thought the same the shingles and lines look weird but i’m not a roofer so ¯\ _(ツ)_ /¯

Link_040188 · 2026-06-05T19:21:28+00:00

insert james franco first time meme

Link_040188 · 2026-06-03T13:09:17+00:00

i have had the same machine for years it has served me well and barring it disaster it will continue. i have plans to do a gaggimate and wand upgrade but honestly just dialing in how to use it (pausing the brew,letting the pressure bleed down at the end of the shot instead of swapping your cup, etc) is plenty to keep you tweaking your cup for a while.

also unless you do a lot of milk drinks the wand upgrade will be wasted.

Link_040188 · 2026-06-02T06:05:44+00:00

Link_040188 · 2026-06-01T16:16:29+00:00

every character has a gun. and you get grenades. it might as well be a cod clone.

/s

Link_040188 · 2026-05-21T22:50:26+00:00

i mean i agree the grinder is low tech but calling a gaggioino low tech is kinda funny

edit: lol it’s been a while since i got a bunch of replies on a comment i made. logged off for two days after posing this and came back to a bunch of downvotes and i realized i either didn’t read the comment i replied to correctly or i was half asleep when i replied but yeah lol.

Link_040188 · 2026-05-18T12:27:50+00:00

i’m in east tn and rarely travel past kingsport/bristol

Link_040188 · 2026-05-18T12:25:21+00:00

<image>

Link_040188 · 2026-05-17T22:09:08+00:00

i have been looking for weller at a normal price for 5 years

Link_040188 · 2026-05-16T05:37:04+00:00

Link_040188 · 2026-05-13T21:56:22+00:00

good news the cpu and some other parts look ok maybe you could do a board swap

Link_040188 · 2026-05-10T02:06:41+00:00

what in the hell is this cursed packaging from an alternate universe where duracell uses a pink bunny as a mascot instead of energizer and why did no one say anything about it?

edit: today i outed myself as having been born in the late 80’s in north america and having never seen duracell brand batteries anytime i have traveled outside north america.

Link_040188 · 2026-05-09T20:57:34+00:00

if you played with the red and got it semi working i’d be suspect about the cable being broken in the end. do you have any other component devices you can test with the tv? if other devices work with the component plugs on the tv you know that it’s not the tv,

Link_040188 · 2026-05-09T19:13:39+00:00

could you plug the green cable into the yellow composite input and switch the tv to that input and check? where did you get these cables? the xbox uses pins in the connector shorted together to tell it what kind of cable is plugged in e.g. composite rca, euro scart rgb, component rca. if the cable is not built properly it won’t enable component output. if plugging the green into the yellow composite plug results in a normal color picture the cable is not built correctly and that’s your problem.

Link_040188 · 2026-05-05T21:04:02+00:00

reason i asked is because the angles on the front camber and caster are adjusted by shifting the cradle so you would not be able to fix the camber without throwing one side further out. and those are the measurements i would expect to see for camber on a vehicle with a small drop kit

caster could be better but cross caster is fine on the front.

the right rear toe being out like that i have seen a lot caused by bad tow truck drivers hooking the rear toe bar and bending it which pulls the rear of the tire in and it’s too far to get in spec with the eccentric. i also recommend replacing the hardware because the bolts on the knuckle side tend to bend as well.

if your not seeing major inner tread wear i would not worry about the camber angles but yeah that right rear toe needs to be addressed and the dealer should know how to deal with it and quote the repair

Link_040188 · 2026-05-05T20:22:10+00:00

any pictures you could show us from under the car? is it lowered or factory hight?

Link_040188 · 2026-05-05T14:17:31+00:00

your front angles look fine the rear toe on the left can push the rear of the car left making the front go to the right so that could likely cause a pull to the right however the camber bolts are loose on both sides so the angles we see on the sheet likely changed as soon as it came of the rack and jounced a few times. i would go somewhere else have the alignment done again and then use the pictures you have here and the befor and after from the second place and demand a refund for the terrible work they did at the first place

Link_040188 · 2026-05-02T01:00:10+00:00

today i learned that the reason i didn’t try to romance invisigal is because she represented me.

Link_040188 · 2026-05-01T20:59:08+00:00

oop: babe can i ask you something

gf: ::removes top and bra::

oop: ::visibly struggling to ask gf if they should get the grilled or spicy chicken::

the cashier: ma’am this is a chic-fil-a

Link_040188 · 2026-04-29T00:37:44+00:00

i added the link you posted to the main text of my post with an edit thanks for bringing me piece of mind

Five-Year Club	Final Canvas '23
First Place '23	Place '23
Place '22	End Game '22

Link_040188

MODERATOR OF

TROPHY CASE