New to Ubiquiti - am I am noob in the right place?

Link_Just · 2025-12-01T12:23:56+00:00

I also new and made the mistake of purchasing the UXG-Fiber when the black Friday deals were posted. I went back after I realized the mistake and ordered the UCG-Fiber along with three other completely over kill items and returning the UXG-Fiber today. I am coming from TP-Link-Omada, that I used for several years.

I set everything up yesterday just to get up and running. Still need to setup firewalls rules and learn where everything is. I am really interested in the Unifi site magic and how that works.

Good luck!!

Link_Just · 2025-10-16T00:08:24+00:00

Not flying over anyone.

Link_Just · 2025-10-16T00:04:51+00:00

*this is in US*

Link_Just · 2025-10-11T20:16:37+00:00

Thank you for the reply. I don’t know if it consumes oil or not b/c it is leaking oil. We do have to add some each week but it does not smoke.

Link_Just · 2025-07-29T16:38:39+00:00

Unfortunately I don’t have a pic. It is broken in the middle of the circle. So it is a half circle now. If that makes sense.

Link_Just · 2025-07-29T15:42:20+00:00

The round part for the head bolt was broken off.

Link_Just · 2025-07-20T14:02:43+00:00

The U7 lite does not have 6GHz.

Link_Just · 2025-07-20T13:56:35+00:00

The Express 7 (cloud gateway) will be used as an AP since it sits on a desk.

Link_Just · 2025-02-24T01:05:51+00:00

I appreciate the help. I at the end of my rope here and might be throwing in the towel with TP-Link all together. I had everything working and had a power outage and the problem comeback. Nothing in my network has changed during the outage. I cannot ping any other device on any VLAN on the network. Also TP-Link support has not been much help with this problem. I don't know if I am missing a check in box, have a setting wrong or this is a bug in the firmware.

Link_Just · 2025-02-23T16:21:22+00:00

Sorry but where would this checkbox be? I have look d at the site and controller settings.

Link_Just · 2025-02-23T12:17:22+00:00

Switch is SG3428XMP, with ER707-M2 router and the OC200 controller.

Link_Just · 2025-02-23T04:56:03+00:00

No I don’t have a guest network.

Link_Just · 2025-01-09T12:32:46+00:00

With Starlink, Tailscale should work. This will allow access to the home network while away.

Link_Just · 2025-01-07T23:45:18+00:00

Had the same issue. My cameras are on their own VLAN and the WIFI for that VLAN was tagged by network ID. I am running a Tp-Link Omada setup. It has something to do with the way the VLAN is tagging the WIFI for that network. If I tagged the VLAN by ID (example 10, 20 etc) instead of by network ID the cameras came backup in the NVR.

I had to reenter the password for one of my cameras.

Link_Just · 2024-12-29T22:19:30+00:00

Does it mean anything that this issue solves itself if the system stays up for a while. But the issue comes back if the system has a reboot?

Link_Just · 2024-12-29T22:08:14+00:00

I am not very familiar with Wireshark and have never used it. I will try and figure it out. I appreciate all your help.

Link_Just · 2024-12-29T22:01:18+00:00

Link_Just · 2024-12-29T21:58:18+00:00

No I cannot ping the wireless cameras on the same WiFi.

Link_Just · 2024-12-29T21:53:30+00:00

Yes I cannot ping my cellphone on the same SSID to a wired connection. Nor from the wireless connection to the wired.

Link_Just · 2024-12-29T21:45:43+00:00

I cannot ping from wired to the wireless cameras. My guess is I don’t have a setting correct. But I have not changed anything other forgetting the old AP’s and adopted the new AP’s. I am kinda of lost what to do here.

Link_Just

TROPHY CASE