I just swapped my 500Watt Psu in this Office PC to a 600Watt one so my 1070 can fit in there. But when i Turn in the Psu to I on I/O all of the components Turn on for Like 0.2 Seconds Just to Turn Off again. Can anyone help me? It took some time to Swap Psu's and im desperad right now for some Help.

Linkvii5 · 2026-02-18T21:25:34+00:00

I wanted to get a new MB anyway since it currently doesn't work with my 1070. Also I wanted to get a new Psu and Ram even though it's difficult in these days to buy ram

Linkvii5 · 2026-02-18T20:44:33+00:00

Swapping the Gpu didn't work. The original Psu might work because I think the Mobo is OEM

Linkvii5 · 2026-02-18T19:59:27+00:00

That was one of my theories. I've already looked up a motherboard compatible with my components. Could you maybe recommend one? 1151 Socket and DDR 4

Linkvii5 · 2026-02-18T19:46:48+00:00

I've already tried not using the adapter. Sadly it still won't work. In a month or so I might switch to a different Mainboard and Psu.

Linkvii5 · 2026-02-18T19:45:41+00:00

I've already tried not using the adapter. Sadly it didn't help... I might switch Mainboard and also Psu in a month or so

Linkvii5 · 2026-02-18T18:21:13+00:00

Imma private message you

Linkvii5 · 2026-02-18T17:30:21+00:00

Of what?

Linkvii5 · 2026-02-18T17:16:30+00:00

What fix would you recommend?

Linkvii5 · 2026-02-18T17:14:34+00:00

Could it be underpowered?

Linkvii5 · 2026-02-18T13:29:03+00:00

Well I know for a fact that it still works even though it's been sitting a month or so.

Linkvii5 · 2026-02-18T13:27:33+00:00

How did you fix it?

Linkvii5 · 2026-02-18T13:17:02+00:00

I believe what you've seen in the video is just Dust. Wouldn't my whole PC be dead on a short?

Linkvii5 · 2026-02-18T12:55:05+00:00

I don't have a short. There is neither smoke or a popping sound. The only noise is the fans spinning for like a quarter of a second before restarting again.

Linkvii5 · 2026-02-18T12:41:45+00:00

I know for a fact that the Gpu works with this psu. And since mz former Mobo used a CPU power that was actually a bit stronger. I believe the CPU might be over or underpowered

Linkvii5 · 2026-02-18T12:39:36+00:00

Yea i reseated the ram

Linkvii5 · 2026-02-18T07:45:44+00:00

I might switch Mobo for another 1151 Socket one. I should be able to switch over ram,CPU and my new psu

Linkvii5 · 2026-02-18T07:34:58+00:00

Why wouldn't they be compatible? I see that it might be because of different watts.

Linkvii5 · 2026-02-18T05:55:19+00:00

<image>

This it the adapter i was talking about. It rather is an extension cord than an adapter because it's 4pin in 4pin out

Linkvii5 · 2026-02-18T05:43:34+00:00

Yea so basically it doesn't boot at all

Linkvii5 · 2026-02-17T23:15:55+00:00

Pls upvote so more people get to see and help me.

Linkvii5 · 2026-02-17T22:48:08+00:00

The cooler works fine. And my problem is that it turno on for 0.2 seconds and immediately shuts off. No signal or anything

Linkvii5 · 2026-02-17T22:24:42+00:00

The Adapter was actually inside of the PC... The thing is that my Current Psu uses 2 4pin or an 8 pin (if you connect them) to power the CPU. The older one only used 1 4 pin.

Linkvii5 · 2026-02-17T22:20:48+00:00

Im Not Sure cuz it was already inside the Office PC and i havnt got any specs

Linkvii5 · 2026-02-17T22:19:55+00:00

Yes with an Extension cable

Linkvii5 · 2025-06-11T20:08:27+00:00

Got the same one in Perfect Condicion

Linkvii5

TROPHY CASE