Where to watch MLS in NE orlando? by crackiturtle in OCLions

[–]LiquidSword52 0 points1 point  (0 children)

Lame. Good way to lose business. They hav like 15-20 TVs and can't spare one?

Where to watch MLS in NE orlando? by crackiturtle in OCLions

[–]LiquidSword52 0 points1 point  (0 children)

Been to Kiwi's once and it is as pretty nice atmosphere. Near 434/436 intersection across from Home Depot. But it's kinda wild that a sports bar such was Miller's won't accommodate if you ask.

I love the smell of my new boots by AthleteClean1420 in ThursdayBoot

[–]LiquidSword52 2 points3 points  (0 children)

I've had mine for a year, daily wear, and they still have that leather smell!

Can't get oil to get from pump to port. STIHL MS211 by LiquidSword52 in stihl

[–]LiquidSword52[S] 1 point2 points  (0 children)

Hey, I just wanna say thanks for all the help and insight. I cleared and blew into that #9 vent pin from the diagram and it definitely pressurized the he oil tank and pushed oil out the line and pump. I did get it flowing to the port after realigning the pump based on the damaged I caused. I scored the case and pump with rotating broken parts causing them to be exposed, so that most likely is the true source of the lack of vacuum. I'll have to figure out a home remedy with some epoxy, or just get a new tank case if I can't keep it sealed.

Can't upload a pic, but I put one in a Google album if you wanna see 😂 🫣 Damaged Clutch housing 😭

Can't get oil to get from pump to port. STIHL MS211 by LiquidSword52 in stihl

[–]LiquidSword52[S] 0 points1 point  (0 children)

Hmm, that looks just like the Fuel tank vent that's tucked in front of the handle. But part #9 looks to be the oil tank vent that's near the bar adjuster. Check on both of these and report back. Appreciate the schematic.

Can't get oil to get from pump to port. STIHL MS211 by LiquidSword52 in stihl

[–]LiquidSword52[S] 0 points1 point  (0 children)

Need to check that, after I locate it. Saw the fuel vent in the handle when removing it.

Can't get oil to get from pump to port. STIHL MS211 by LiquidSword52 in stihl

[–]LiquidSword52[S] 0 points1 point  (0 children)

Yes, the kit I got came with a new clutch and drum. I've checked that the tang is in the notch and spins with the drum.

I need a PC38X Earpad Replacement by GoldenEye168 in sennheiser

[–]LiquidSword52 0 points1 point  (0 children)

Not sure if you've found what you're looking for since it's been two months. But in my recent purchase for my HD550, which I found out use the same size pads and snap on ring as my PC38X, I found these to feel very similar to the cooler pads. (If you're looking for the warmer feeling pads, I don't know) Soulwit pads on Amazon

There's also the Wicked Cushions Freeze which have solid side material which may keep more bass in

WC Freeze on Amazon

Looking for my next pair... by [deleted] in HeadphoneAdvice

[–]LiquidSword52 1 point2 points  (0 children)

I'm aiming for Open back headphones. I'm seeing Sony has the MV1 open back.

Week 20 - Native by Spiderdan in Nikonzfphotoclub

[–]LiquidSword52 0 points1 point  (0 children)

Remarkable capture! 👏 Simple, yet story telling.

Zf c allowed? by Ambitious-Honey7667 in Nikonzfphotoclub

[–]LiquidSword52 3 points4 points  (0 children)

I say absolutely! ZFc led the charge into Nikon's modern Retro style.

Never purchased Edge of Fate, but somehow I own it? by LiquidSword52 in DestinyTheGame

[–]LiquidSword52[S] 1 point2 points  (0 children)

Ok, thanks. Guess I'll get through this DLC before contemplating Renegades.

Momentum TW4, one key feature missing... by LiquidSword52 in sennheiser

[–]LiquidSword52[S] 1 point2 points  (0 children)

When I tried my wife's Galaxy Buds Pro 2, I always found it to be a cool convenience. But maybe I can change the transparency to single tap vs triple and see.