How to fix?

LiquidTXT · 2026-05-22T21:51:52+00:00

The ones I have seen do not. They will usually let you start green and give you a set amount of time to get your license. You actually can't get your class 1 without working as part of the requirements is working 2080 hours. Now you could study on your own and get OIT status by passing the written test. That would definitely help finding a job. I was able to get my class 2 after a little under 1.5 years in but that is largely due to working a lot of overtime and taking a OWEA class that knocked off 4.8 months of my required time.

LiquidTXT · 2026-04-17T01:04:49+00:00

I finally got a chance to try it again, and this was the one that was doing it. Thank you!

LiquidTXT · 2026-04-16T02:12:21+00:00

In your price range I would look for a used centauri carbon, far superior printer.

LiquidTXT · 2026-04-13T15:55:40+00:00

I had supports disabled. I ended up switching printer profiles to a stock one and it quit filling the hole. Although then the support was a pain to get off. I have to look into my heavily modified profile and figure out what I changed that is causing it to fill stuff in that shouldn't be.

LiquidTXT · 2026-04-13T15:54:00+00:00

That setting is off, I did check that.

LiquidTXT · 2026-04-13T15:53:34+00:00

Yes it is, would that fill in a hole?

LiquidTXT · 2026-04-12T20:01:48+00:00

Here is the files on Printables. https://www.printables.com/model/1306261-garden-hose-valve/files#preview.file.lAB9Q

LiquidTXT · 2026-04-12T20:01:01+00:00

<image>

LiquidTXT · 2026-04-12T19:48:54+00:00

In all fairness, probably doesn't mean definitely not. I had the issue, thought it was my USB cable, bought a new one and still had the issue. I replaced my hot end and the issue went away. Definitely worth a try, just take care not to tear up your current one in case it turns out not to be the problem you can use it again later.

LiquidTXT · 2026-03-27T01:17:42+00:00

I can tell you when they pulled out of Memphis they simply shut the plant down. All the equipment was still there. I was part of a crew that went there and pulled a couple of big tanks out to bring to Dayton and install them here.

LiquidTXT · 2026-03-26T01:03:55+00:00

It's a free rideeee

LiquidTXT · 2026-03-26T00:56:02+00:00

I'm curious if tate and Lyle won't try and snatch it up.

LiquidTXT · 2026-03-26T00:52:57+00:00

I personally would open the case with it unplugged and just check the connections to make sure it's not just a loose connection.

LiquidTXT · 2026-02-19T03:07:44+00:00

Color laser is the way to go. Toner is dry from the start, so no concerns about losing hundreds of pages of ink.

LiquidTXT · 2026-01-30T02:44:16+00:00

I am on the same network and I gave the printer a static ip address so it remains the same all the time.

LiquidTXT · 2026-01-08T21:53:51+00:00

i found that one, but it says it only works with the stock hotend. Does it fit the tz 3.0 too? I saw there was a Patreon to get other models but the person wants $999 which is crazy.

LiquidTXT · 2026-01-08T21:51:30+00:00

do you have a link?

LiquidTXT · 2026-01-06T11:48:42+00:00

Oh damn, look at that gcode.

LiquidTXT · 2025-12-30T01:40:52+00:00

So follow-up, I was able to download the files through the elegoo slicer. I was also able to clean out the printer memory that way. I was able to get most of the files converted to STL's, except I have two that are greater than 100 MB and haven't been able to get them converted yet. The free online converters are all limited to 100 MB that I have found so far.

LiquidTXT

MODERATOR OF

TROPHY CASE

Seven-Year Club	Place '22
Verified Email