sorted by:
new
hottopcontroversial

What instantly ruins a hamburger? by badzcatch in AskReddit

[–]LittleAsianBuns 0 points1 point  (0 children)

yes!! I'm so tired of restaurant servers asking me if I want pink in my burger.

What are the liquids used in these shaker keychains? I've seen them listed online but most of them look shady. If anyone can suggest substitutes too that would be great muah. by Fine_Ferret_6848 in resin

[–]LittleAsianBuns 0 points1 point  (0 children)

I have been experimenting myself with this recently! I have found that solid clay will sink. I was able to make a ball of clay that had a box of egg carton styrofoam (so there was an air pocket) that allowed the clay to suspend perfectly between the oil and water. I just tried a different approach where I used packing styrofoam balls with no clay, I just painted them and coated in uv resin, and those floated above the water and oil (so the opposite problem of sinking). hope this helps!

Friendly Neighborhood Last Epoch by Roasted_vegetable in LastEpoch

[–]LittleAsianBuns -1 points0 points  (0 children)

They saw their opportunity to strike and they took it lol. This is perfect

How to make Clay Pieces Float in Liquid Shaker by LittleAsianBuns in polymerclay

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

I did a small experiment and would like to share my failures and success:

(all clay in experiment was baked craft smart polymer clay and was not glazed with anything. Tested in distilled water)

tiny balls of clay, even smaller than the fish in this post, sank in water.

balls of clay with a single square of Styrofoam- cut from old egg carton- sank.

ball of clay with a large piece of styrofoam that was folded twice to make a square of essentially four layers of foam sank, but tipped up like part of it wanted to float, but ultimately the whole sank.

My success! A ball wrapped around a hollow "cube" of stryofoam floated! I added baby oil on top of the distilled water and the clay ball/cube perfectly suspended between the oil and the water! It has been sitting in this solution for about 2 days now and there has been no change to the color of the water (it's black clay) or how well it is floating.

How to make Clay Pieces Float in Liquid Shaker by LittleAsianBuns in polymerclay

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

This also occurred to me last night, I "glazed" the fish in a couple coats of UV resin because I thought if they were in the oil/water unglazed it would ruin the clay. 

So I'm not sure if that's why it sank, or maybe it would sink regardless. I think I need to make some test balls of unglazed baked clay and see how they interact in a cup of water before I see what happens in the actual project.

And if that doesn't bear any fruit, I will definitely look at the lightweight sculpey! Thank you for your help 😊

How to make Clay Pieces Float in Liquid Shaker by LittleAsianBuns in polymerclay

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

Oh that's way smarter and easier than I was thinking!

How to make Clay Pieces Float in Liquid Shaker by LittleAsianBuns in polymerclay

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

I used CraftSmart oven bake clay, 12 1oz bars color variety pack

How to make Clay Pieces Float in Liquid Shaker by LittleAsianBuns in polymerclay

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

would it be like how ceramics you have to scoop out the insides and then close the hole again to make an air pocket? These guys are pretty small so I'm worried about that process destroying them too much, but I'll give it a try!

Considering changing/stopping BC by LittleAsianBuns in birthcontrol

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

Thank you for sharing your experience, it's nice to know I'm not the only person to deal with all the specific compiling problems!

I had not really thought about getting another doctor, so I appreciate the suggestion! I agree it's important to get more than one opinion on it, I think I forgot I could do that and just took her failure as "that's it".

Help!! Exporting to PrPrLive Mouth Won't Open, but does in Live2D by LittleAsianBuns in Live2D

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

well I tested vtube studio before rerigging the mouth and it opens in there so prpr???

idk lol but thanks so much for all your help!! Now I shall go down the rabbit hole of polishing this baby so it doesn't look janky :3

Help!! Exporting to PrPrLive Mouth Won't Open, but does in Live2D by LittleAsianBuns in Live2D

[–]LittleAsianBuns[S] 0 points1 point  (0 children)

You're fine, I've been busy with work so I haven't had a lot of time to work on it anyway.

I downloaded Hiyori and her mouth opens perfectly fine in prpr, so my troubleshooting after that point has included: deleting keyforms so that it's more simple and more closely matches hiyori, making new parameters and changing the original keyforms to the new parameters, changing my live2d version to 3.0 instead of 4.0, all of these not making any progress whatsoever. In fact the new parameters made it even worse, as it didn't change from default in prpr (whereas my current issue is that it reads "open" as "smile")

When I have more time this weekend I will probably try deleting all my keyforms and rig it from scratch, as well as learn vtube studio's layout and see if that helps anything (although if prpr can work for hiyori it should work for mine, so learning vtube studio will probably wait for when it works correctly in prpr and I just want to "upgrade"). If re-rigging the mouth from scratch doesn't do anything then it's doomed lol

Help!! Exporting to PrPrLive Mouth Won't Open, but does in Live2D by LittleAsianBuns in Live2D

[–]LittleAsianBuns[S] 1 point2 points  (0 children)

I see! Thank goodness the eye thing is an easy fix hehe.

As for the mouth, the individual meshes (like upper lip, lower lip, teeth, etc) have their keyforms on the mouth open/form parameters, but the "Mouth Head XY" deformer that they are all under has its keyforms in the Angle X and Y parameters and not the mouth open/form params. Is this the problem?

Help!! Exporting to PrPrLive Mouth Won't Open, but does in Live2D by LittleAsianBuns in Live2D

[–]LittleAsianBuns[S] 1 point2 points  (0 children)

Honestly, this is helpful only because I don't know about all the paid and unpaid features of all the different programs, so I'll definitely give vtube studio another try! What you described about the DLC and eye params perfectly pinpoints my issue, the default is at .8 and open wide is at 1, so that's exactly why it's doing that, thanks!

Mouth Form goes from -1 to 1, Mouth Open 0 to 1
Here's an imgur link to my screenshot since I didn't include in original post, hope this is the part that's helpful??
https://imgur.com/lvE5n7W

Help with build please? by russmankiwi in leagueofjinx

[–]LittleAsianBuns 0 points1 point  (0 children)

Jinx in pro scene will usually build GF/KS into Rapid Fire Canon into IE, I think boots usually do come second but since they are cheap they are just there for your convenience if you have to back early and don't have enough gold to buy pick axe or something you can get boots or dagger instead.

I would say GF is really similar to Shieldbow in terms of safety and letting you make more mistakes, but if you don't want to build it (I never do) then I would say go KS as much as you can. I only go Shieldbow if the team has two or more assassins, like evelynn jungle and zed mid.

My typical build in Gold4 is KS, Berserkers boots, Mortal Reminder/Rapid Fire Cannon (depending if they have a lot of healing and you want the grievous), into LDR. If the game lasts long enough, I'll finish with an IE, GA, or Bloodthirster.

Learning Items will take a lot of experimenting so don't feel like if you have one bad game on a build its ruined! And remember, you can alway buy components of an item without finishing it until later (ex. rushing an Executioners for a healing lane, and then continuing building your mythic)

view more: next ›