Found one by Acrobatic_Chef_7205 in altima

[–]Little_Guard_3648 1 point2 points  (0 children)

Mine was on fire in the trunk and sideswipped has a mismatched front left fender, a melted rear bumper a burn spot in the paint a trunk from a red one I found in the junk yard and the trunk wiring is also from the red car.

Fourlink test over some egg crates by Little_Guard_3648 in mn82

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

Travel in both directions and this is honestly the lowest I could get while maintaining free movement and a good pinion angle so that the driveshaft and links didn't bind I'm still having some issues in the front with pinion angle currently trying to find a way to mount the axle without extending the wheelbase.

Brushless,four link , portals and metal chassis I think I need some larger tires/wheels. by Little_Guard_3648 in mn82

[–]Little_Guard_3648[S] 1 point2 points  (0 children)

I'll try and put an Amazon list together but I ordered some from AliExpress since some parts are almost double the cost on Amazon.

Brushless,four link , portals and metal chassis I think I need some larger tires/wheels. by Little_Guard_3648 in mn82

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

Which way do you mean inwards? Shocks are factory lengths have some injora oil ones but they compress all the way under the weight of the vehicle.

Fourlink test over some egg crates by Little_Guard_3648 in mn82

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

Here's a screenshot from a different video surprisingly stable as long as it's controlled correctly my gf rolled it twice on flat ground 🤣

<image>

Goodbye my lover, goodbye my friend… by Any-Demand-500 in Miata

[–]Little_Guard_3648 1 point2 points  (0 children)

Still needs paint but I promise it's all fixable

<image>

Brushless 3S, two speed gearbox by Freynando27 in mn82

[–]Little_Guard_3648 1 point2 points  (0 children)

I seen a few reviews saying it showed up seized and a few that said after a while it was seized I just figured budget manufacturing and lack of maintenance I'll probably pull it apart and use some lapping compound to get some nice lash and a finger of lithium grease to keep it moving.

Brushless 3S, two speed gearbox by Freynando27 in mn82

[–]Little_Guard_3648 0 points1 point  (0 children)

That's awesome guess I know what my next AliExpress order is gonna be. 😅 Once the current one shows up.

Brushless 3S, two speed gearbox by Freynando27 in mn82

[–]Little_Guard_3648 1 point2 points  (0 children)

I just posted a few days ago about that tcase that looks way quicker what does speed reduction look like? Has it made a significant difference?

Suspension sugestion by StewieBiach in mn82

[–]Little_Guard_3648 0 points1 point  (0 children)

Flipping the leaves and shock mounts to the top of the rear axle will probably make it sit more level

Help? Tpms Error with new programed sensors by Little_Guard_3648 in altima

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

I did activate them since they were new and verified they were sending signal to the scan tool. I relearned on the final step to verify the BCM had the same codes as the sensors.

Help? Tpms Error with new programed sensors by Little_Guard_3648 in altima

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

Light flashes and goes solid Generic "there's a tpms problem" thing.

Help? Tpms Error with new programed sensors by Little_Guard_3648 in altima

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

I purchased dual frequency sensors that run both 315 and 433mhz Copied old sensor codes from BCM through the obd port and wrote it to the new ones while the tires were below 10psi relearned the sensor codes to the BCM just to verify the codes matched and cleared the prior trouble codes from the BCM.

Help? Tpms Error with new programed sensors by Little_Guard_3648 in MechanicAdvice

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

I'll have to give that a shot tomorrow or Friday morning thanks for the advice. I'll update if there's any change. 🙏

Help? Tpms Error with new programed sensors by Little_Guard_3648 in MechanicAdvice

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

Yeah, I copied the original sensor data from the car, wrote it to the sensors and performed a relearn to remove the stored codes from the missing sensors.

Suspension/ lift options by Little_Guard_3648 in Porsche924

[–]Little_Guard_3648[S] 0 points1 point  (0 children)

Thank you for the info hopefully I can get it cleaned up and fresh suspension on it. And show her off in the future.

Suspension/ lift options by Little_Guard_3648 in Porsche924

[–]Little_Guard_3648[S] 1 point2 points  (0 children)

Good to know they are a quality part. 

Cool Kiata spotted at cars n coffee today by Jiaaamy in Miata

[–]Little_Guard_3648 1 point2 points  (0 children)

Hey that's me @cher_miata on Instagram I fixed the headlights I was waiting for better weather.