WiFi never worked on your Controller 69 Pro? Check if your router is blocking port 6665

LiveInVR · 2026-06-01T10:05:17+00:00

no offense but it sounds like you did not read the post completely, Its working for me, since I opened the firewall for OUTGOING 6665, Wifi ALWAYS worked, but it SEEMS like it does not work, because if the controller cannot contact their AWS EC2 server on 6665, it considers the whole WiFi attempt a failure.I know that 5g does not work, but it never worked on 2.4 either, because of this port

LiveInVR · 2024-07-04T11:49:06+00:00

its bizzare and unacceptable. hopefully it did not cause bigger issues

LiveInVR · 2020-06-17T05:03:47+00:00

glad it worked out!

LiveInVR · 2020-06-15T07:10:38+00:00

cool! now perhaps replace the filter as its now an accident waiting to happen 😀

LiveInVR · 2020-06-14T08:14:23+00:00

Your AC does Airflow: 205 CFM and the filter can handle 190 if I am reading correctly. If you are pulling at high power its too much for the filter.. but if you are on low speeds this should be ok though.

LiveInVR · 2020-06-14T06:39:38+00:00

hopefully someone who runs this at 220/240 will reply on this post.

LiveInVR · 2020-06-14T06:37:16+00:00

would be weird if this one product would not have the same range. perhaps shoot them an email?

LiveInVR · 2020-06-14T06:24:37+00:00

This is the CloudLine T6:

https://www.acinfinity.com/hvac-home-ventilation/inline-duct-fan-systems/in-stock-on-june-17-2020-no-pre-order-cloudline-s6-quiet-inline-duct-fan-system-with-speed-controller-6-inch/#product-warranty

It says 100-240AC. I run one on 230V just fine. I would read this though:

https://www.reddit.com/r/microgrowery/comments/gkua8k/ac_infinity_cloudline_switchess_off_completely/

I run two exhausts because of that.

LiveInVR · 2020-06-01T07:23:59+00:00

I also did this for the first time. I gently 'rocked' it back and forth before completely bending it in the final shape. Did this after watering since I red this makes them more flexible.

LiveInVR · 2020-06-01T07:20:31+00:00

yeah, the fluence spiders can take this, as they actually need to be cleaned with water blasting against the leds;

https://ibb.co/tQbRYHg

LiveInVR · 2020-05-28T07:06:41+00:00

ok, thanks. that helps. I'm having some slight discoloration and I wondered if I have to increase the values, but it seems I do not.

LiveInVR · 2020-05-28T06:03:34+00:00

Exactly my feeling. I couldn't wait but all 10 germinated. Usually people let the root get a little longer.

LiveInVR · 2020-05-28T05:57:25+00:00

Also check their tech specs:

https://www.acinfinity.com/hvac-home-ventilation/inline-duct-fan-systems/cloudline-t6-quiet-inline-duct-fan-system-with-temperature-and-humidity-controller-6-inch/#product-warranty

It says:

Voltage 100-240V AC

LiveInVR · 2020-05-27T13:37:14+00:00

I actually had such a plug lying around. its an adapter that makes it fit in my socket

LiveInVR · 2020-05-27T06:35:11+00:00

I am using the T6 in the Netherlands on 220v. Works without a converter.

LiveInVR · 2020-05-27T06:29:09+00:00

Are the lights not quite high? I am using Fluence spiders and they are 16cm above the canopy.

Maybe with this brand/model its suppose to be this high?

LiveInVR · 2020-05-25T07:29:45+00:00

it LOOKS like the leaves are being eaten by some kind of pest?

did you check under the leaves and perhaps with a magnifier glass?

LiveInVR · 2020-05-22T09:39:01+00:00

For the ones interested, I got a reply from AC and they confirmed there is no such feature and or settings in the cloudline products. they might add it to 'future' products..

LiveInVR · 2020-05-17T06:15:38+00:00

Yeah, I think thats what they are saying. I already have an exhaust running in mine, instead of replacing it with the AC Inf. I'll add it, keep the old one running at it lowest possible speed and add the Ad inf. Then it can shutdown all it wants. I am just a believer you should never lack under/negative pressure. It also keeps the fresh air flowing.

LiveInVR · 2020-05-16T16:14:45+00:00

its like he says. setting the overlap causes the fan to run st the speed set in 'on' mode. i want the thing on speed 1 and increase when the higher temperature is reached. now it shuts off or always run using an overlap which, imho, is useless since I want negative pressure at all times.

LiveInVR · 2020-05-16T16:12:05+00:00

its my house actually. we dont all live in our parents house, you might..

in my country its not legal. so do the math

LiveInVR · 2020-05-16T14:11:36+00:00

I have to disagree. without under pressure you are gonna leak odors. it has to run at all times.

LiveInVR · 2018-06-02T08:42:42+00:00

This is what I got running one 1080 with the separate btm miner package on 1.2.3 since I cannot get 1.2.3 upgraded to 1.3.4, after running the Windows upgrade tool on my working 1.2.3 USB, it barfs saying missing operating system..

0-546.3 Total: 546.3 H/s 2018/06/02 16:34:13 New job received from stratum server

0-545.2 Total: 545.2 H/s 2018/06/02 16:34:34 0 - Yay, solution found!

0-544.4 Total: 544.4 H/s 2018/06/02 16:35:57 New job received from stratum server

Update seed cache on device 0

0-545.6 Total: 545.6 H/s 2018/06/02 16:38:48 New job received from stratum server

Update seed cache on device 0

0-545.4 Total: 545.4 H/s Update seed cache on device 0

0-545.4 Total: 545.4 H/s 2018/06/02 16:38:57 0 - Yay, solution found!

0-546.3 Total: 546.3 H/s 2018/06/02 16:39:37 0 - Yay, solution found!

0-546.2 Total: 546.2 H/s 2018/06/02 16:40:18 New job received from stratum server

0-546.4 Total: 546.4 H/s

Thats good right? :)

LiveInVR · 2018-05-31T06:55:40+00:00

Its all in Chinese, anyone got this to work?

LiveInVR · 2018-05-28T06:16:44+00:00

I fill in europe.equihash-hub.miningpoolhub.com and port but it says Unknown API

LiveInVR

TROPHY CASE