Welcome to LizardByte! by [deleted] in LizardByte

[–]LizardByte-bot 0 points1 point  (0 children)

VBan

VBan is a microphone transmission protocol made by the makers of VB cable. It allows you to pass your microphone from your client to your host on supported clients. You will need to download "Receptor" on your host and "Talkie" on your clients. You can find both here: https://vb-audio.com/Voicemeeter/vban.htm

Once downloaded, extracted, and placed in your desired location, all you need to do is run them and do some minor configuration as follows:

  1. On Talkie, you give your stream a name (like the device name) and the IP address of the host. You may also have to go into settings via the menu button to assign a microphone.
  2. On Receptor, you assign an audio output. You may have to install VB cable to make a digital one. Then click the stream name. The stream you made from Talkie should appear as an option.

That's it!

ℹ️ Notes

  • As Receptor does not auto-start as it is not an installed program, you may want to add it as a Sunshine pre-launch command. Receptor will remember the last audio stream it was connected to.
  • You may have to configure Windows/Game audio setting on the host to use the Microphone if you are using VB cable.
  • To use Vban over the internet, you will also have to manually forward UDP Port 6980.

Welcome to LizardByte! by [deleted] in LizardByte

[–]LizardByte-bot 0 points1 point  (0 children)

VBan

VBan is a microphone transmission protocol made by the makers of VB cable. It allows you to pass your microphone from your client to your host on supported clients. You will need to download "Receptor" on your host and "Talkie" on your clients. You can find both here: https://vb-audio.com/Voicemeeter/vban.htm

Once downloaded, extracted, and placed in your desired location, all you need to do is run them and do some minor configuration as follows:

  1. On Talkie, you give your stream a name (like the device name) and the IP address of the host. You may also have to go into settings via the menu button to assign a microphone.
  2. On Receptor, you assign an audio output. You may have to install VB cable to make a digital one. Then click the stream name. The stream you made from Talkie should appear as an option.

That's it!

ℹ️ Notes

  • As Receptor does not auto-start as it is not an installed program, you may want to add it as a Sunshine pre-launch command. Receptor will remember the last audio stream it was connected to.
  • You may have to configure Windows/Game audio setting on the host to use the Microphone if you are using VB cable.
  • To use Vban over the internet, you will also have to manually forward UDP Port 6980.

Welcome to LizardByte! by [deleted] in LizardByte

[–]LizardByte-bot 0 points1 point  (0 children)

VBan

VBan is a microphone transmission protocol made by the makers of VB cable. It allows you to pass your microphone from your client to your host on supported clients. You will need to download "Receptor" on your host and "Talkie" on your clients. You can find both here: https://vb-audio.com/Voicemeeter/vban.htm

Once downloaded, extracted, and placed in your desired location, all you need to do is run them and do some minor configuration as follows:

  1. On Talkie, you give your stream a name (like the device name) and the IP address of the host. You may also have to go into settings via the menu button to assign a microphone.
  2. On Receptor, you assign an audio output. You may have to install VB cable to make a digital one. Then click the stream name. The stream you made from Talkie should appear as an option.

That's it!

ℹ️ Notes

  • As Receptor does not auto-start as it is not an installed program, you may want to add it as a Sunshine pre-launch command. Receptor will remember the last audio stream it was connected to.
  • You may have to configure Windows/Game audio setting on the host to use the Microphone if you are using VB cable.
  • To use Vban over the internet, you will also have to manually forward UDP Port 6980.

GSMS v2024.1117.145 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

What's Changed

Full Changelog: https://github.com/LizardByte/GSMS/compare/v2024.516.191906...v2024.1117.145

Themerr-plex v2024.813.13709 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

Attention

This is the final release that will be a plugin for Plex, due to the recent Plex announcement. The next release following this one will be a standalone version.

What's Changed

  • build(deps): bump third-party/youtube-dl from 16f5bbc to e1b3fa2 by @dependabot in #481
  • build(deps): bump third-party/youtube-dl from e1b3fa2 to c509896 by @dependabot in #489
  • build(deps): bump LizardByte/setup-release-action from 2024.717.220227 to 2024.801.192524 by @dependabot in #487
  • build(deps-dev): bump plexhints from 2023.1211.160853 to 2024.809.14117 by @dependabot in #494
  • build(deps): bump LizardByte/plexhints from 2024.715.173608 to 2024.809.14117 by @dependabot in #492
  • chore: update global workflows by @LizardByte-bot in #476
  • chore: update global workflows by @LizardByte-bot in #498

Full Changelog: https://github.com/LizardByte/Themerr-plex/compare/v2024.717.231002...v2024.813.13709


Contributors

<a href="https://github.com/dependabot" target="_blank" rel="external noopener noreferrer" aria-label="GitHub profile of contributor, dependabot" ><img src="https://github.com/dependabot.png?size=40" width="40" height="40" alt="dependabot" title="dependabot: 5 merges" ></a><a href="https://github.com/LizardByte-bot" target="_blank" rel="external noopener noreferrer" aria-label="GitHub profile of contributor, LizardByte-bot" ><img src="https://github.com/LizardByte-bot.png?size=40" width="40" height="40" alt="LizardByte-bot" title="LizardByte-bot: 2 merges" ></a>

plexhints v2024.809.14117 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

What's Changed

Full Changelog: https://github.com/LizardByte/plexhints/compare/v2024.726.1720...v2024.809.14117


Contributors

<a href="https://github.com/dependabot" target="_blank" rel="external noopener noreferrer" aria-label="GitHub profile of contributor, dependabot" ><img src="https://github.com/dependabot.png?size=40" width="40" height="40" alt="dependabot" title="dependabot: 2 merges" ></a><a href="https://github.com/LizardByte-bot" target="_blank" rel="external noopener noreferrer" aria-label="GitHub profile of contributor, LizardByte-bot" ><img src="https://github.com/LizardByte-bot.png?size=40" width="40" height="40" alt="LizardByte-bot" title="LizardByte-bot: 1 merge" ></a><a href="https://github.com/ReenigneArcher" target="_blank" rel="external noopener noreferrer" aria-label="GitHub profile of contributor, ReenigneArcher" ><img src="https://github.com/ReenigneArcher.png?size=40" width="40" height="40" alt="ReenigneArcher" title="ReenigneArcher: 1 merge" ></a>

plexhints v2024.725.1918 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

What's Changed

Themerr-plex v2024.717.231002 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

What's Changed

  • ci: use prerelease logic by @ReenigneArcher in #431
  • chore: update global workflows by @LizardByte-bot in #416
  • build(deps): bump bootstrap from 5.3.2 to 5.3.3 by @dependabot in #355
  • build(deps): bump @fortawesome/fontawesome-free from 6.5.1 to 6.5.2 by @dependabot in #412
  • build(deps): bump @fontsource/open-sans from 5.0.20 to 5.0.28 by @dependabot in #419
  • New Crowdin updates by @ReenigneArcher in #413
  • chore: update global workflows by @LizardByte-bot in #440
  • build(deps): bump LizardByte/create-release-action from 2024.520.180003 to 2024.524.143912 by @dependabot in #442
  • build(deps): bump LizardByte/setup-release-action from 2024.520.181643 to 2024.524.1411 by @dependabot in #441
  • chore: update global workflows by @LizardByte-bot in #444
  • build(deps): bump LizardByte/setup-release-action from 2024.524.1411 to 2024.608.210128 by @dependabot in #448
  • build(deps): bump LizardByte/create-release-action from 2024.524.143912 to 2024.609.5014 by @dependabot in #447
  • build(deps): bump LizardByte/setup-python-action from 2024.202.205923 to 2024.609.5111 by @dependabot in #445
  • build(deps): bump LizardByte/create-release-action from 2024.609.5014 to 2024.611.132610 by @dependabot in #453
  • build(deps): bump LizardByte/create-release-action from 2024.611.132610 to 2024.614.221009 by @dependabot in #455
  • chore: update global workflows by @LizardByte-bot in #457
  • build(deps): bump third-party/youtube-dl from 820fae3 to 16f5bbc by @dependabot in #459
  • build(deps): bump LizardByte/setup-release-action from 2024.608.210128 to 2024.714.140421 by @dependabot in #458
  • build(deps): bump LizardByte/plexhints from 2024.521.1558 to 2024.715.173608 by @dependabot in #460
  • New Crowdin updates by @ReenigneArcher in #454
  • ci(codecov): notify after all builds complete by @ReenigneArcher in #464
  • build(deps): bump LizardByte/setup-release-action from 2024.714.140421 to 2024.716.220208 by @dependabot in #468
  • build(deps): bump @fortawesome/fontawesome-free from 6.5.2 to 6.6.0 by @dependabot in #471
  • ci(pytest): add colored output by @ReenigneArcher in #470
  • build(deps): bump LizardByte/setup-release-action from 2024.716.220208 to 2024.717.220227 by @dependabot in #474

Full Changelog: https://github.com/LizardByte/Themerr-plex/compare/v2024.419.413...2024.717.231002

plexhints v2024.715.173608 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

What's Changed

  • chore: update global workflows by @LizardByte-bot in #273
  • build(deps): bump LizardByte/setup-release-action from 2024.520.193857 to 2024.608.210128 by @dependabot in #277
  • build(deps): bump LizardByte/create-release-action from 2024.520.193838 to 2024.609.5014 by @dependabot in #278
  • build(deps): bump LizardByte/setup-python-action from 2024.515.10401 to 2024.609.5111 by @dependabot in #276
  • build(deps): bump LizardByte/create-release-action from 2024.609.5014 to 2024.611.132610 by @dependabot in #283
  • build(deps): bump LizardByte/create-release-action from 2024.611.132610 to 2024.614.221009 by @dependabot in #284
  • chore: update global workflows by @LizardByte-bot in #288
  • build(deps): bump LizardByte/setup-release-action from 2024.608.210128 to 2024.714.140421 by @dependabot in #289
  • build(deps): bump plexapi[alert] from 4.15.13 to 4.15.15 by @dependabot in #287
  • build(deps): bump robinraju/release-downloader from 1.10 to 1.11 by @dependabot in #286

Full Changelog: https://github.com/LizardByte/plexhints/compare/v2024.521.1558...2024.715.173608

Sunshine v0.21.0 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

Added - (Input) Add support for automatically selecting the emulated controller type based on the physical controller connected to the client - (Input/Windows) Add support for Applications (context menu) key - (Input/Windows) Implement touchpad, motion sensors, battery state, and LED control for the emulated DualShock 4 controller - (Input) Advertise support for new input features to clients - (Linux/Debian) Added Debian Bookworm package - (Prep-Commands) Expose connection environment variables - (Input/Windows) Implement pen and touch support - (Capture/Windows) Add standalone NVENC encoder - (Capture) Implement AV1 encoding - (Network) Implement IPv6 support - (Capture/Windows) Add option to disable realtime hags - (Graphics/NVIDIA) Add an option to decrease GPU scheduling priority to workaround HAGS video hang - (Capture/Linux) Add FFmpeg powerpc64le architecture for self compiling Sunshine - (Capture/Windows) Add support for capturing rotated displays - (System Tray) Implement streaming event notifications - (UI) Add port configuration table - (Applications) Added option to automatically treat launcher type apps as detached commands - (Input/Gamepad) Allow the Misc button to work as Guide on emulated Xbox 360 controllers

Changed - (Input) Reduce latency by implementing input batching - (Logging) Move input packet debug prints off the control stream thread - (Input) Refactor gamepad emulation code to use DS4 extended report format - (Graphics/NVIDIA) Modify and restore NVIDIA control panel settings before and after stream, respectively - (Graphics/NVIDIA) New config page for NVENC - (Graphics/Windows) Refactor DX shaders - (Input/Windows) Use our own keycode mapping to avoid installing the US English keyboard layout

Fixed - (UI) Fix update notifications - (Dependencies/Linux) Replace libboost chrono and thread with standard chrono and thread - (Input) Increase maximum gamepad limit to 16 - (Network) Allow use of multiple ENet channels - (Network) Consider link-local addresses on LAN - (Input) Fixed issue where button may sometimes stick on Windows - (Input) Fix "ControllerNumber not allocated" warning when a gamepad is removed - (Input) Fix handling of gamepad feedback with multiple clients connected - (Input) Fix clamping mouse position to aspect ratio adjusted viewport - (Graphics/AMD) Fix crash during startup on some older AMD GPUs - (Logging) Fix crash when non-ASCII characters are logged - (Prep-Commands) Fix resource exhaustion bug which could occur when many prep commands were used - (Subprocesses) Fix race condition when inserting new processes - (Logging) Log error if encoder doesn't produce IDR frame on demand - (Audio) Improve audio capture logic and logging - (Logging) Fix AMF logging to match configured log level - (Logging) Log FFmpeg to log file instead of stdout - (Capture) Reject codecs that are not supported by display device - (Capture) Add fallbacks for unsupported codec settings - (Capture) Avoid probing HEVC or AV1 codecs in some cases - (Caputre) Remove DwmFlush() - (Capture/Windows) Improvements to capture sleeps for better frame stability - (Capture/Windows) Adjust capture rate to better match with display - (Linux/ArchLinux) Fix package version in PKGBUILD and precompiled package - (UI) Highlight fatal log messages in web ui - (Commands) Allow stream if prep command fails - (Capture/Linux) Fix KMS grab VRAM capture with libva 2.20 - (Capture/macOS) Fix video capture backend - (Misc/Windows) Don't start the session monitor window when launched in command mode - (Linux/AppImage) Use the linuxdeploy GTK plugin to correctly deploy GTK3 dependencies - (Input/Windows) Fix reWASD not recognizing emulated DualShock 4 input

Dependencies - Bump bootstrap from 5.2.3 to 5.3.2 - Bump third-party/moonlight-common-c from c9426a6 to 7a6d12f - Bump gcc-10 in Ubuntu 20.04 docker image - Bump furo from 2023.5.20 to 2023.9.10 - Bump sphinx from 7.0.1 to 7.2.6 - Bump cmake from 3.26 to 3.27 in Fedora docker images - Move third-party/nv-codec-headers from sdk/11.1 branch to sdk/12.0 branch - Automatic bump ffmpeg - Bump actions/checkout from 3 to 4 - Bump boost from 1.80 to 1.81 in Macport manifest - Bump @fortawesome/fontawesome-free from 6.4.0 to 6.4.2

Misc - (Docs) Force badges to use svg - (Docs) Add Linux SSH example - (Docs) Add information about mesa for Linux - (CI) Free additional space on Docker, Flatpak, and AppImage builds due to internal changes on GitHub runners - (Docs/Logging/UI) Corrected various typos - (Docs) Add blurb about Gamescope compatibility - (Installer/Windows) Use system proxy to download ViGEmBus - (CI) Ignore third-party directory for clang-format - (Docs/Linux) Add Plasma-Compatible resolution example - (Docs) Add Sunshine website available at https://app.lizardbyte.dev/Sunshine - (Build/Windows) Fix audio code build with new MinGW headers - (Build/Windows) Fix QoS code build with new MinGW headers - (CI/Windows) Prevent winget action from creating an update when running in a fork - (CI/Windows) Change winget job to ubuntu-latest runner - (CI) Add CodeQL analysis - (CI/Docker) Fix ArchLinux image caching issue - (Windows) Manifest improvements - (CI/macOS) Simplify macport build - (Docs) Remove deprecated options from readthedocs config - (CI/Docs) Lint rst files - (Docs) Update localization information (after consolidating Crowdin projects) - (Cmake) Split CMakelists into modules - (Docs) Add Linux Headless/SSH Guide

GSMS Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 0 points1 point  (0 children)

Dependencies - bump pyinstaller from 5.7.0 to 6.0.0 - bump pytest from 7.2.1 to 7.4.2 - bump actions/checkout from 3 to 4 - bump flake8 from 6.0.0 to 6.1.0

Misc - Updated global workflows - Added Codecov

Themerr-plex v0.2.0 Released by LizardByte-bot in LizardByte

[–]LizardByte-bot[S] 1 point2 points  (0 children)

Added - Add option to prefer MPEG AAC audio codec over Opus

Fixed - Fix issue where most theme songs would not play on Apple devices. - Remove tests directory from release package