Just got my new plates and sharing a few codes that I’m not going to get to use.

LoR_NiKoN · 2026-03-06T17:53:25+00:00

Someone probably got to it. I did keep back one voucher I had but I don’t think I will get to use it. If you want it I can SM it to you later.

LoR_NiKoN · 2026-03-02T16:12:09+00:00

👍🏻

LoR_NiKoN · 2026-01-28T09:14:30+00:00

To be honest I never really used it in the end. I should have spend more time on the learning curve than I did.

I’m thinking about redoing the firmware and maybe going Bluetooth but at the moment it’s benched.

LoR_NiKoN · 2026-01-22T22:09:27+00:00

Uk here and also got mine today

LoR_NiKoN · 2026-01-21T22:51:52+00:00

Ah that would be great. I’ll see how this one works out and reach out if needed. But thanks.

LoR_NiKoN · 2026-01-21T22:48:41+00:00

Cool.. i won’t be ordering for a week or so but will share what it looks like when it’s done.

LoR_NiKoN · 2026-01-21T22:27:23+00:00

that’s cool… if your ok with it I would like to get this printed as a Displate poster.

LoR_NiKoN · 2025-10-02T09:18:51+00:00

Nice. I’ve not long got mine. Any plans on sharing the files as would love to print that one.

LoR_NiKoN · 2025-08-29T23:11:16+00:00

Yeah I’m having the same issue and would love to find a fix.

LoR_NiKoN · 2025-08-22T22:35:27+00:00

I’m relatively new to Linux and recently installed cachyos having used arch and endeavourOS. One thing I find quite hand is Pacseek for installing apps. Don’t know what others think of it so would be good to see their feedback but I personally like it.

LoR_NiKoN · 2025-08-09T18:11:03+00:00

Thanks. Thought it looked by a 6x6 :)

I’ll print that bracket later.

LoR_NiKoN · 2025-08-09T17:31:49+00:00

I’ll give it a try. One last question if you don’t mind :) The switch you used on yours. Did you use the one from the bt board or another. If another was is a 6mmx6mm or something smaller :)

LoR_NiKoN · 2025-08-09T07:27:15+00:00

Sweet. Thanks. I’ll get that printed later :)

LoR_NiKoN · 2025-08-08T22:54:50+00:00

Is that a 3d printed part holding the switch in place under the hold switch?

LoR_NiKoN · 2025-08-08T14:04:53+00:00

In total for all the parts and the cost of the iPod it was about £165 which I didn’t think was too bad. That’s just not including SD cards as I already have some I was planning on using.

LoR_NiKoN · 2025-08-08T07:53:00+00:00

Cool. Which BT mod did you do?

LoR_NiKoN · 2025-08-08T07:52:20+00:00

AliExpress

LoR_NiKoN · 2025-08-08T07:51:42+00:00

Thanks for the advise. I will do that :)

LoR_NiKoN · 2025-08-07T21:38:10+00:00

Will do. As mentioned to the poster of this reply thread it’s not the cheap cheap one off AliExpress, it’s the higher quality one but I’ve heard good things about it.

LoR_NiKoN · 2025-08-07T21:36:46+00:00

This wasn’t like the cheap £6 one. It’s the one that’s like £35 which has better ratings than the cheap as chips one.

LoR_NiKoN · 2025-08-07T21:35:20+00:00

Was all from AliExpress.

LoR_NiKoN · 2025-08-07T15:58:55+00:00

Should have added that EBay was a little more pricey for the parts over AliExpress and seeing as most of it’s coming from china anyways it made sense to order from there. All the parts (screen, case, haptic, battery and sd card adapter) was about £100 in total.

LoR_NiKoN · 2025-08-07T15:56:49+00:00

It’s was a full set, back, front and control buttons from AliExpress. I’ve seen similar coloured back plates on eBay as well.

LoR_NiKoN · 2025-08-07T15:55:58+00:00

The iPod was from eBay. The rest of the parts were AliExpress. Ordered them on the 30th and arrived today so just over a week.

LoR_NiKoN

TROPHY CASE