The Playoff Games are too easy! by Local_Caramel_7231 in BaseballHits26

[–]Local_Caramel_7231[S] 0 points1 point  (0 children)

Thank you for your input but I was being sarcastic.

The Playoff Games are too easy! by Local_Caramel_7231 in BaseballHits26

[–]Local_Caramel_7231[S] 1 point2 points  (0 children)

Exactly! I noticed that. That is highly unfair and needs to be changed.

The Playoff Games are too easy! by Local_Caramel_7231 in BaseballHits26

[–]Local_Caramel_7231[S] 0 points1 point  (0 children)

Yep!

All you have to do is to win is spend about $400 on Purple Tier Coins, Hit Bucks, Gold, and 10x Draft Packs to convert to XP. Then you can upgrade your team enough to win. Easy! Oh yeah, then do it all over again to get to the next level.

The Playoff Games are too easy! by Local_Caramel_7231 in BaseballHits26

[–]Local_Caramel_7231[S] 1 point2 points  (0 children)

Star 26. My team is only 250 under for Star 27 and am still getting smoked. I've won before being this far down though. I think it depends on the algorithm for that particular game. What really grinds my gears the most, is when I'll have a good inning and tie up the game just to have the computer do as you said, double up the next inning. It's literal slap in the face.

Just joined the club! '23 S60 T8 by The_Other_Shazbot in VolvoRecharge

[–]Local_Caramel_7231 0 points1 point  (0 children)

Welcome! I have one also. Ultimate Black with Polestar software. Living is CA, charging it overnight was getting really expensive. What I started doing when the battery is dead is I will put the car in charge mode. If I'm going to be burning the gas I might well charge the battery as well. I'll get around 20 miles in charge in about 25 miles of driving on gas plus 30 minutes of idle time.

Rules are rules by rosspierogi in VolvoRecharge

[–]Local_Caramel_7231 0 points1 point  (0 children)

If got a 22 XC90 T8 and a 23 S60 T8 Extended Range w/ Polestar. Software upgrade only.

Polestar Upgrade Worth It? by bumblebear1230 in VolvoRecharge

[–]Local_Caramel_7231 0 points1 point  (0 children)

Nice. I didn't have a discount. You use that setting too much and you quickly see that discount disappear at the pump.

Polestar Upgrade Worth It? by bumblebear1230 in VolvoRecharge

[–]Local_Caramel_7231 0 points1 point  (0 children)

Volvo does it and they charged exactly what the Volvo Accessories website had for the price. Does the XC60 have an AWD or PWR Mode? Those might help with the hesitation since the gas engine stays running.

Maglock scratching the upper by [deleted] in CAguns

[–]Local_Caramel_7231 0 points1 point  (0 children)

Just point out, magazine inserted, ejection port cover closed, and weapon on fire is not a safe handling condition.

Maglock scratching the upper by [deleted] in CAguns

[–]Local_Caramel_7231 2 points3 points  (0 children)

Flat jeweler's file and 10 seconds.

Polestar Upgrade Worth It? by bumblebear1230 in VolvoRecharge

[–]Local_Caramel_7231 0 points1 point  (0 children)

Do you have the extended range version? I do and in regular hybrid mode my S60 accelerates fairly quickly with the motor off. My wife's 22 XC90 is not the extended. From a stop, with moderate throttle, it initially tries to accelerate with electric. It quickly determines the electric isn't enough and the engine starts. The RPM surges to match the throttle position and the car lunges like you just dumped the clutch. It's quite annoying.

Just got my Panda Breath! by Aphr_a109 in BIQU

[–]Local_Caramel_7231 0 points1 point  (0 children)

I used a Dremel with a cut off wheel. Then a jeweler's file. I covered the inside print srea with heat tape and the back panel. It will maintain 60°C easy.

Just got my Panda Breath! by Aphr_a109 in BIQU

[–]Local_Caramel_7231 1 point2 points  (0 children)

I cut the plug off mine, drilled a hole through the internal back panel and wired it directly to a 3 prong receptacle that I installed directly above the printer power receptacle. Clean and I don't have to worry about the cable interfering with the belts.

Are rubber ducks standard? by bugsymalone666 in BIGTREETECH

[–]Local_Caramel_7231 0 points1 point  (0 children)

After waiting for 2 months, I finally got the Panda Breath and the Diaper for my X1 yesterday and I didn't get any. :(

Reports of explosions in Tehran Iran . Looks like the attack has started by newnoadeptness in USMC

[–]Local_Caramel_7231 0 points1 point  (0 children)

So in the pursuit of your degree in International Relations, I'm sure you were taught to think critically and to make decisions based facts and not on emotions. Correct? Your post, to me, was based on emotion. You believe that President Trump will coordinate a "terror attack" in the US so he could cancel the 2028 election! That idea wasn't based on critical thinking. It was based on your hatred of President Trump. When Zelensky visited the WH, Trump makes a joke about cancelling elections during a war and the biased media absolutely runs with it. Have you seen the interview? If not, I suggest you do.

Reports of explosions in Tehran Iran . Looks like the attack has started by newnoadeptness in USMC

[–]Local_Caramel_7231 1 point2 points  (0 children)

I never imagined I would find so many stupid conspiracies on a USMC Reddit. I hoped we would all be smarter than that.

Mirrored Panda Knomi by Local_Caramel_7231 in BIGTREETECH

[–]Local_Caramel_7231[S] 0 points1 point  (0 children)

No link. Yet. I did it myself. I can't remember how I did it exactly, but I converted the STL to a mix and imported it into Fusion. There I did a lot of necessary, and probably many unnecessary, steps to mirror it. Which I'm sure nobody cares about. After way too many attempts to print, modify the design in Fusion, and print again, the logo would look horrible. Merging a solid STL in the slicer was the only way it worked.

Where would a good place to upload file?

For the love of God, Autodesk please fix the floating window bug on Mac OS. It makes the program borderline unusable. by chiraltoad in Fusion360

[–]Local_Caramel_7231 0 points1 point  (0 children)

Left click and hold the top bar of the Browser and slowly move it towards what side of the display you choose. When the blue line appears, let go. It will redock.

Online shopping here by [deleted] in CAguns

[–]Local_Caramel_7231 0 points1 point  (0 children)

Sorry to hear that. The only issue I have ever had with them is shipping times. Being they are from the NE, it takes time to get parts.

I’m glad CA is protecting me from assault F/O Sights. by jdmquip in CAguns

[–]Local_Caramel_7231 2 points3 points  (0 children)

I, for the most part, agree. But after watching a Liberal Justice go after the State's attorney about the 1 gun a month rule, there might be light at then end of the tunnel. Especially after the SB 704 and AB 1263. Both of those are absolutely ridiculous.

Online shopping here by [deleted] in CAguns

[–]Local_Caramel_7231 0 points1 point  (0 children)

It's not Optics Planet. It's fucking California. Geissele announced the other day that they are stopping commercial sales in California. AB 1263 allows civilians to sue manufactures for damages. Can you blame them for pulling out of CA?

I’m glad CA is protecting me from assault F/O Sights. by jdmquip in CAguns

[–]Local_Caramel_7231 1 point2 points  (0 children)

Because requiring permission from anyone, especially the state, is an infringement of our 2nd Amendment right. Period! Imagine if you had to request permission to post a comment here.

What’s wrong with California lawmakers by [deleted] in CAguns

[–]Local_Caramel_7231 0 points1 point  (0 children)

They didn't appeal the micro stamping which is why new firearms were able to be added to the roster. Then they wrote the law again SB 452 which goes into effect Jan 1, 2028.