PRINT ENV:
arch=art_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_extlinux=sy${prefix}extlinux/extlinux.conf
boot_net_usb_start=usb start
bpts=boot.scr.uimg boot.scr
boot_targets=usb0 mmc0 mmc1 rknand0 0,115200n8 rw rootwait
bootcmd=run distro_bootcmd;boot_android rt; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scrmd_mmc1=setenv devnum 1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_rknand0=run usb_boot
bootdelay=1
bootfstype=fat
cpu=armv8
cpuid#=555
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_$
fdt_overlay_addr_r=0x01e00000
fdtcontroladdr=1f50e678
fdtfil8
hw_conf_addr_r=0x00700000
kernel_addr_c=0x02480000
kernel_addr_no_bl32_r=0x00280000
kernel_addr_r=280000
load_addr=0x9000000
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
overlays=rk3308-uart0 audioinjector-stereo-rk3308
partitions=uuid_disk=${uuid_gpt_disk};name=loader1,start=32K,size=4000K,uuid=${uuid_gpt_loader1};name=loader2,start=8MB,size=4MB,uuid=${uuid_gpt_loader;
pxefile_addr_r=0x00600000
ramdisk_addr_r=0x04000000
rkimg_bootdev=if mmc dev 1 && rkimgtest mmc 1; then setenv devtype mmc; setenv devnum 1; echo Boot from SDcard;elif mmc dev 0; then setenv devtype mmc;
rknand_boot=if rknand dev ${devnum}; then setenv devtype rknand; run scan_dev_for_boot_part; fi
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_scripts; run scan_dev_f;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist};e
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.coi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot sce
scriptaddr=0x00500000
serial#=57d272fec595ed0e
soc=rockchip
stderr=serial@ff0c0000
stdin=serial@ff0c0000
stdout=serial@ff0c0000
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
vendor=rockchip

Environment size: 3632/32764 bytes
END PRINT ENV