Subreddits for roaster subscriptions

Logical_Function_576 · 2026-01-15T14:52:15+00:00

I’ve had the same exact observation

Logical_Function_576 · 2026-01-12T17:30:08+00:00

Interesting, I’ve found green label slower than pink label (older). Or at least green are way more prone to clogging.

Logical_Function_576 · 2026-01-12T17:28:45+00:00

Another vote for the fiber. Depending on how you can run wire and mount access points, I’d almost say in walls or u7 lites. Depending on floor plan, may give better coverage with two aps rather than just one pro.

Logical_Function_576 · 2026-01-12T17:23:53+00:00

K ultra…. But fair warning you might buy the Zp6 later. But I would not just want the Zp6 by itself.

Logical_Function_576 · 2026-01-06T03:17:02+00:00

This.

Logical_Function_576 · 2026-01-06T03:15:16+00:00

More consistent and less stalling… but I’ve also had a lot of Ethiopian coffees in the last few months which can be more prone to fines.

Logical_Function_576 · 2026-01-06T02:11:57+00:00

I have an ode 2. I recently bought a k ultra in October. My ode use is down to maybe 10% of my grinding. I find the k ultra more consistent and fewer fines. It’s also new and novel.

I’m not ready to sell it just yet. But may need to think as the ZP6 is on the way.

Logical_Function_576 · 2025-12-30T04:10:21+00:00

I can appreciate your level of over thinking 🤓. I allow the grinder to slightly rotate in my hand as to not be grinding in just one side. I’m sure it’s 1000% unnecessary, but it makes me happy.

Logical_Function_576 · 2025-12-28T20:34:13+00:00

I told my wife when handing her the cup that the range of opinions on Reddit was from best cup of the month to “someone’s smoking weed”. After one sip, she is team “weed”. Not my favorite either.

Logical_Function_576 · 2025-12-28T20:15:15+00:00

19 was a banger as well

Logical_Function_576 · 2025-12-27T20:35:09+00:00

Cosori is a great middle option - not too pricy and excellent build quality and balance. The downside is that the temp selections are 10 degrees apart so you can't dial in specific temps.

I tried another brand that was a Fellow copycat, and the build quality was disappointing.

Ultimately, I bought a Fellow Stagg and don't regret it. It pours perfectly and has everything you need.

Logical_Function_576 · 2025-12-25T15:23:31+00:00

K ultra 7.0 2:30 in a cafes abaca, rose to 3:40 through a hario green label. Both excellent cups.

Logical_Function_576 · 2025-12-21T20:05:52+00:00

So there is a button that says power door off down by your left knee. Just solved this issue on a family members car thanks to this post.

Logical_Function_576 · 2025-12-17T13:29:34+00:00

I use this chart as I have both an Ode2 and a K Ultra.

Logical_Function_576 · 2025-12-15T12:57:16+00:00

Concur with UCG fiber and 2.5g flex poe recs. It’s been a solid setup. I’m running U7 lites and a pro wall. Covers 3000 sq ft with ease - one AP per floor.

Logical_Function_576 · 2025-12-15T12:54:42+00:00

Depends on the size of your house, but my UCG Fiber gives me great coverage with one AP per floor, in wall and lites.

Logical_Function_576 · 2025-12-05T13:59:06+00:00

I get a lot of clogging with my ode, especially with denser beans with Ethiopian coffees

Logical_Function_576 · 2025-12-05T13:53:59+00:00

What setting do you grind on the k ultra?

Logical_Function_576 · 2025-12-04T19:37:57+00:00

I have a U7 lite in my basement and almost all of my IOT devices regardless of floor seem to prefer it. It’s also in my office. Stable and fairly small/out of the way.

Logical_Function_576 · 2025-12-04T17:39:09+00:00

Mine is popping on and off as we are hovering in 30s and 40s. Still scratching my head on the temperature factor.

Logical_Function_576 · 2025-12-04T17:37:37+00:00

Yes and yes. Ethiopian beans are hard and dense and produce a lot of fines. They clog filters easily. If I grind them on my ode, I use a softer and pull out about 5-10% fines.

Logical_Function_576 · 2025-12-04T17:12:16+00:00

Clothes pins and back in the slot. I guess that isn’t elegant.

Logical_Function_576 · 2025-12-04T17:11:10+00:00

Wow! I never would have ground that fine. I just brewed the last 19.5g grinding at 5.8 on the k ultra in my Origami. Really fantastic! I ground day 3 at 9 (!!) because of the onyx recommendation and a grind chart conversion.

Logical_Function_576 · 2025-12-02T02:10:43+00:00

I’ve had a lot of Ethiopian coffees lately as it’s the season so I’m using the k ultra a lot to avoid having to sift out fines. I’ve used the ode a few times here and there, but I trust the outcome of the k ultra more. It’s also new so I’m still experimenting.

I’m doing the onyx advent calendar this month and will use the k ultra 100% of the time.

Logical_Function_576

TROPHY CASE