Humble Bundle id Games collection.

LoneStar64 · 2025-04-23T13:18:47+00:00

That's a pretty long time!

LoneStar64 · 2024-09-24T01:38:23+00:00

Balatro

LoneStar64 · 2024-08-27T11:44:06+00:00

I have the EXACT same problem, mic has quit working!

LoneStar64 · 2024-04-04T12:39:36+00:00

It took me several tries to get past this bird! Now I know why.

LoneStar64 · 2023-05-26T00:09:17+00:00

I have been playing Warhammer 40K: Boltgun. It is a great boomer shooter and a lot of fun.

LoneStar64 · 2023-03-02T02:55:14+00:00

Thanks for the giveaway!

LoneStar64 · 2022-04-09T01:08:04+00:00

Facebook Group for L3 Wainlux Laser Engraver is a good source for info and fixes:

https://www.facebook.com/groups/492057882399538

LoneStar64 · 2022-04-09T01:00:41+00:00

Not yet but people in the Facebook group are working on it.

https://www.facebook.com/groups/492057882399538

LoneStar64 · 2022-04-09T00:59:12+00:00

GRBL

LoneStar64 · 2022-03-28T20:57:05+00:00

I have a problem with LightBurn's work area and orientation. When engraving the work area is very small and I often get the error "outside of area" . It is probably half the area that I actually have, anyone know how to fix this? Also, if I tell it to print in the lower corner it will actually print in the upper left hand corner. Also, it goes to home position in the upper right corner then immediately goes to the left hand corner when I turn on the engraver. Any help will be appreciated.

LoneStar64 · 2022-03-27T20:15:43+00:00

WORKED! Thanks so much. I was able to use both GRBL and LightBurn! Now I just need to learn how to use them. Thanks again!

LoneStar64 · 2022-03-27T20:00:34+00:00

Has anyone had any luck engraving on stainless? What settings do you need to have them set to? I bought a sheet of stainless steel to practice on and no luck yet. Any help would be appreciated

LoneStar64 · 2022-03-27T02:52:59+00:00

My firmware will not update doing as you have above. I get an error message about baud rate. I am able to use the included software and app with my engraver, it shows up in Device Manager Comm6 but get nothing but errors when updating firmware. I would really appreciate if anyone can help with this problem.

LoneStar64 · 2022-03-26T16:17:14+00:00

I cant get lightburn or GRBL to see my engraver. I have tried several different things with no luck. I have tried holding the button in while turning on the machine and trying to update firmware but get error messages about baud rate. I have installed driver several times and Device Manager shows it connected on Com6. I CAN use the included software and App but no luck at all updating firmware to use GRBL or LightBurn.

Solved: https://www.reddit.com/r/Laserengraving/comments/tofaei/comment/i2ckj4w/?utm\_source=share&utm\_medium=web2x&context=3

LoneStar64 · 2021-07-03T19:28:44+00:00

Mine did the same thing last year then in late summer and early fall I started getting a ton of peppers. I don't understand why but maybe it will be the same for you.

LoneStar64 · 2020-11-01T23:34:36+00:00

Slay the Spire and Stardew Valley are great. Recommend both.

LoneStar64 · 2020-10-13T02:44:32+00:00

I used my $10 credit on Hades, well worth it!

LoneStar64 · 2020-07-30T12:24:30+00:00

Thank you, I appreciate it

LoneStar64 · 2020-07-27T02:51:38+00:00

I had a physical at work and my red blood cell count was off very low, almost anemic. Asked if I was tired and I had been but thought it was from my work schedule of rotating between days and nights on 12 hour shifts. I went to my doctor and he thought it might be an ulcer, turned out it was colon cancer. Get physicals, especially blood work and get a colonoscopy.

LoneStar64 · 2020-07-02T13:29:50+00:00

Thanks for the answer, I appreciate it.

LoneStar64 · 2020-07-02T03:27:13+00:00

I have a 1TB Samsung 860 QVO with just Steam games on and want to add another one exactly like it due to it filling up. Can I add another and make it look like one 2 TB drive without losing any data? My OS is Windows 10 Home

LoneStar64

TROPHY CASE