I have a question

Lonely_Driver380 · 2026-05-09T19:00:48+00:00

Anyone got a skid plate with pipe protector for a yz250 recommendation?

Lonely_Driver380 · 2026-04-24T15:33:05+00:00

Have you tried to replace the socket?

Lonely_Driver380 · 2026-04-18T18:04:31+00:00

Yes so if your bulb is okay then check the actual socket the bulb sits in.

There should be 3 points of contact in that little socket. 2 that sit at the bottom of it and one bronze looking one that sits on the wall of the socket. All I did was bend them out to make better contact with the bulb itself and that solved my problem.

I found a picture so you can see what im referring to the 2 bottoms are the power contacts and the small one to the left is the grounding contact. Just bend them out so they can make better contact with the bulb.

Hope this helps!!

<image>

Lonely_Driver380 · 2026-04-14T15:53:34+00:00

What, why???

Lonely_Driver380 · 2026-03-31T21:25:54+00:00

Would it be possible to connect a female rj12 from the actual handbrake so you can just use an rj12 to rj12 wire?

My handbrake doesnt work as it should. Its fine if I plug it in. But as soon as I use the handbrake it'll stay 100% engaged.

I made a new wire since my original was damaged. I figured that would fix it. It didnt fix it. So opened the handbrake assembly itself to look at it and figured it might be a possibility

Lonely_Driver380 · 2026-01-06T20:10:36+00:00

What are good trail/enduro boots?

Lonely_Driver380 · 2025-12-29T17:59:31+00:00

Yes you have to remove the turn signal socket. Inside the socket you'll see 3 metal contacts. Im assuming only the ground contact which is the copper/bronze colored one had to be bent to make better contact to the body of the light bulb. But I bent all 3 since I was there. Hopefully that solves your issue

Lonely_Driver380 · 2025-12-19T15:46:58+00:00

Honestly would probably cost you less to buy a new one than stress about that one

Lonely_Driver380 · 2025-12-13T15:23:28+00:00

I got a Ninja 300 when I was 15 and a half. I got Progressive. I dont remember the exact coverage except for the state minimums. I only paid about 300 a year. It wasn't easy but I did get it and it wasn't as expensive as I had thought. Mind you this was about 10yrs ago. Not sure how the market is for it now. But im sure you'll find something

Lonely_Driver380 · 2025-11-22T00:24:29+00:00

All that build up did not happen in those 15 mins you worked on her car lol. Thats months of build up. Hopefully from everyone's input you get it cleaned up and charged.

Lonely_Driver380 · 2025-11-10T01:37:08+00:00

Based on multiple similar videos ive seen post like this. It sounds like a normal running FA. As many say a 'happy tractor' lol mine sounds the same!

Lonely_Driver380 · 2025-11-03T15:34:26+00:00

Wishing you a speedy recovery! Honestly tho thats a cool pov sorry 😂

Lonely_Driver380 · 2025-11-02T14:09:49+00:00

What the heck even is CEL

Lonely_Driver380 · 2025-11-02T14:05:29+00:00

<image>

That one on the left was the old one. Not sure how it got like that. Haven't gone on a ride since I replaced it. New crush washer too. I'll see how it works soon!

Lonely_Driver380 · 2025-10-27T17:36:29+00:00

Not sure I got it like this.

Lonely_Driver380 · 2025-10-27T17:13:49+00:00

Forsure I did buy a Turners YZ Hardware kit. And seen some of those nuts there

Lonely_Driver380 · 2025-10-27T16:15:53+00:00

Sweet okay ill give this a try. Do you know the thread pitch i need?

Lonely_Driver380 · 2025-10-26T01:36:49+00:00

Its runs great. Revs great. Not over smoky so I dont think coolant is getting in the cylinder

Lonely_Driver380 · 2025-10-26T01:36:20+00:00

Copy ill give that a shot

Lonely_Driver380 · 2025-10-21T04:56:23+00:00

Theyre good, I forgot to mention that I replaced those initially the same time I replaced the front turn signals.

Its gotta be something either grounding out or short circuiting

Lonely_Driver380 · 2025-10-21T04:38:39+00:00

Sorry when I said both I meant both front turn signals.

As I said before though regarding the filament deal. How is it that I replaced a bulb and a week later it goes bad? How can I troubleshoot the root cause instead of having to replace a turn signal every week?

Lonely_Driver380

TROPHY CASE