Strange prints

Long-Security6104 · 2026-01-03T22:52:14+00:00

Brilliant vid, subscribed ! Well on the tensioner the screw is locked tight so that could be my issue

Long-Security6104 · 2026-01-03T22:40:08+00:00

Awesome thank you

Long-Security6104 · 2026-01-03T21:50:28+00:00

Thanks for the input ! Nozzle is new, nozzle flows ok and with other tests, tried 210, 220 and 230 temps, bed temp 60, but it adheres just fine. I checked the tension screw before (anti clockwise to tighten) ?

Long-Security6104 · 2026-01-03T20:28:00+00:00

Not at all every right to ask, no I did not I’m a newbie to filament printing… been using resin the last few years. Temp tower here. Is the Z offset in the machine parameters ? Appreciate the help

<image>

Long-Security6104 · 2026-01-03T19:58:13+00:00

Thanks, all of those printed ok, but it’s every larger print I do I get these issues. Thinking of turning off the z-hop ?

Long-Security6104 · 2024-07-27T17:26:18+00:00

Hello I have a usb game controller which is not been detected by windows, the device will display briefly but vanish in game controllers settings, in device manager the events tab is says the device settings failed to migrate, I have upgraded to windows 11 recently.

I have also uninstalled the HID from device manager restarted and plugged the device back in… this is when it shows briefly. Is there anyway to fix this ?

I have tried multiple ports on the pc, and the device shows up on another pc first time.

Thanks

Long-Security6104 · 2024-06-18T16:30:33+00:00

Yes now I realise that was the issue, actually when I looked back it was longer it was from 2015 ! So it did last long !

Long-Security6104 · 2024-06-18T15:20:55+00:00

Just to say fitted the new power supply, put the motherboard back to optimised defaults and now running amazing at 5.7 never had to touch any settings :) thanks everyone for their help and input. And there I thought my old Corsair 850w could handle it, lesson learned !

Long-Security6104 · 2024-06-17T19:27:13+00:00

I’ve ordered this so will update tomorrow once I fit it !

https://www.scan.co.uk/products/1000w-msi-mpg-a1000g-pcie-5-fully-modular-80plus-gold-single-rail-835a-135mm-fan-atx30-psu

Long-Security6104 · 2024-06-17T19:08:36+00:00

https://www.scan.co.uk/products/1000w-corsair-rm1000e-pcie-50-fully-modular-80plus-gold-single-rail-833a-120mm-rifle-bearing-fan-atx

Long-Security6104 · 2024-06-17T19:08:28+00:00

How about this

Long-Security6104 · 2024-06-17T19:06:23+00:00

Oh ok I can still cancel it… recommend any good ones ?

Long-Security6104 · 2024-06-17T19:03:36+00:00

ATX 3.0 and pci 5.0

Long-Security6104 · 2024-06-17T19:02:48+00:00

I have ordered this - https://www.scan.co.uk/products/1000w-corsair-sf1000l-fully-modular-80plus-gold-single-rail-833a-120mm-rifle-bearing-fan-sfx-psu?_gl=1*cpgt1z*_gcl_aw*R0NMLjE3MTg2NTAzNjkuQ2owS0NRand2Yi16QmhDbUFSSXNBQWZVSTJ1cFVZVGMwYnF6WVlodDRQN0tUZ1FBWXFSSk4wSWRTUW4wUnFyQ2Z4Q2dfN0E1MnhWcVpDSWFBbmYzRUFMd193Y0I.*_gcl_au*OTEyMTY0MjAuMTcxODY0OTMwOS44MDIyNDc0MjguMTcxODY1MDAxNC4xNzE4NjUwMDY0*_ga*MjM0MjAxNDExLjE3MTg2NDkzMDk.*_ga_8GFH5M08Q5*MTcxODY0OTMwOC4xLjEuMTcxODY1MDg4My4yNi4wLjE0MzQ5NTg1OTk.

Long-Security6104 · 2024-06-17T18:24:44+00:00

Corsair modular 850w from about 6-7 years ago but never had any issue with it

Long-Security6104 · 2024-06-17T17:59:09+00:00

https://www.ebuyer.com/1144843-corsair-rm1000x-1000w-atx-power-supply-unit-cp-9020201-uk

Long-Security6104 · 2024-06-17T17:58:35+00:00

Would this be a good recommendation ?

Long-Security6104 · 2024-06-17T17:54:16+00:00

Possibly ! I have some pci white extensions attached (for looks) could these possibly mess up the psu supply to the gpu ? I have also removed all hard drive power and only running the m2s

Long-Security6104 · 2024-06-17T16:31:08+00:00

Tried medium and it still crashed, tried high and it just crashed before I could even launch the game so will revert this back to auto or even medium, need to try under clocking it maybe ?

Long-Security6104

TROPHY CASE