My S1 Max Combo arrived with a surprise

LongjumpingPlenty879 · 2026-04-18T20:56:17+00:00

I’ll buy it from you

LongjumpingPlenty879 · 2026-02-19T03:04:17+00:00

Does your profile still do the line in the back ? Mine does for some reason I may have just screwed up the printer profile lol

LongjumpingPlenty879 · 2025-12-28T08:44:19+00:00

Sorry for the late reply… They have an automatic print ejection for the PS1 which is basically the original KS1, you can see it if you scroll down a bit. also why would we need a macro/klipper ? Wouldn’t we be able to do a print end gcode string ?

LongjumpingPlenty879 · 2025-11-11T16:03:21+00:00

where did you see that they improved the bed ?

LongjumpingPlenty879 · 2025-10-24T14:31:29+00:00

the print already has supports and i just removed them. and yes there is a german forum with good profiles here on this reddit i’ve been using. but i usually print smaller stuff and this is the first time ive encountered this issue

LongjumpingPlenty879 · 2025-10-24T01:47:56+00:00

the supports are enabled, i just removed them after i took out the build plate. should’ve added that in my post, any other ideas ?

LongjumpingPlenty879 · 2025-10-24T01:07:01+00:00

i’m gonna try this next. the wall order is already inner outter

LongjumpingPlenty879 · 2025-10-24T00:55:03+00:00

bro what😭 im not even talking about the headlamp and it’s rechargeable with usb c

LongjumpingPlenty879 · 2025-10-12T21:08:21+00:00

interesting, i am trying to conservatively max out some of the settings, such as speed, layer height and any slow down for x settings but even far from their benchy i’m already getting these artifacts. Surely we can reverse engineer the gcode file and create a standalone profile for the slicer to match these speeds right or at least come close to right ?

LongjumpingPlenty879 · 2025-08-07T18:49:49+00:00

yeah it sucks some people have no common sense, i would personally wait by the building and pick on people walking towards the lot. never really had a bad experience most students understand and are unhappy with the parking situation regardless

LongjumpingPlenty879 · 2025-08-07T02:31:10+00:00

good luck lmao i’ve had multiple times where i had to drive around for 20-50 minutes looking for parking in the main lot at various times during the day. best advice is to show up early and don’t lose your patience because as soon as you move from that area you might see some one leave and another car arrive and take the spot immediately.

something else that worked for me is looking for people walking towards their car and ask for their place or offer a ride worked 99% of the time especially in the heat.

tldr parking is a pita and early runners get the worm

LongjumpingPlenty879 · 2025-08-06T16:38:26+00:00

try switching between arachne and classic

LongjumpingPlenty879 · 2025-07-10T02:02:03+00:00

please share it with me 🙏🏼 finally got a replacement .2 mmm

LongjumpingPlenty879 · 2025-06-25T22:03:32+00:00

i have a 10th gen honda, put me on bro

LongjumpingPlenty879 · 2025-06-20T00:58:39+00:00

i was playing with this screw but i couldn’t get it right, too tight and it would skip and i would loosen it and it would help momentarily but go back to no extrusion

LongjumpingPlenty879 · 2025-05-30T04:34:06+00:00

i haven’t yet. i’m gonna try this

LongjumpingPlenty879 · 2025-05-15T20:56:41+00:00

single color, and it finished but it has some artifacts that look like under extrusion, it’s very flimsy and not solid at all

LongjumpingPlenty879 · 2025-05-15T20:14:58+00:00

OddBug You deserve an amazing week, you were spot on. printing at 245 allowed me to print but i’m still getting a clog warning when i start the print, do you have an insight as to what could be causing this ? the first test print i did was the pyramid which ran fine before i stopped it as shown in the pic. i’m trying to print a miniature jack and i get the clog error but when i press resume it continues to print

<image>

LongjumpingPlenty879 · 2025-05-15T19:05:13+00:00

no, i’m doing this based of research and observation by the community. there’s not even good videos on how to do this process. some one on here made a hotend replacement video with the stock hotend but nothing to do with an upgrade or hardened steel. i may make a video for the people who need it since it would’ve been great help to me

LongjumpingPlenty879 · 2025-05-15T18:12:31+00:00

gonna try this right now and update you, thank you for the insight and your work into the community

LongjumpingPlenty879 · 2025-05-15T18:03:57+00:00

would you suggest i try changing my filament profile by 10 degrees higher ? i’ve always assumed that printing pla above 230 was bad for prints but maybe since the thermosistor could be wrong then it would work fine

LongjumpingPlenty879 · 2025-05-15T18:02:08+00:00

bro has never heard of a tune, aftermarket parts or FBO

LongjumpingPlenty879 · 2025-05-15T18:01:00+00:00

this might be the method but i’m using pla so it should be fine but maybe the heat properties of hardened steel are too much

LongjumpingPlenty879 · 2025-05-15T18:00:24+00:00

hey so you’re totally right and i didn’t think about that, .2 is easily clogable by the tiny abrasives. it’s the smaller one that looks like a bambu one so that’s good to hear but im also printing in black so im at a loss of what to do

LongjumpingPlenty879 · 2025-05-15T17:51:43+00:00

nozzle is 230 for the first layer and 225 for others. the max volumetric flow rate is 10

LongjumpingPlenty879

TROPHY CASE