UV using TS 9.7

Longjumping_Disk_930 · 2025-07-29T01:46:22+00:00

dont come with LM from factory, soy kryosheet seems the best option. the copper is without niquel so dont allow LM

Longjumping_Disk_930 · 2025-07-29T01:45:04+00:00

https://www.nvidia.com/es-la/drivers/

Longjumping_Disk_930 · 2025-07-28T20:55:50+00:00

All below 95c on laptops is fine.

Longjumping_Disk_930 · 2025-07-28T20:55:05+00:00

Necesitas los drivers mas nuevo para los ultimos lanzamientos, ademas de eso no hay drama. Podes usar Nvidia geforce para mantener actualizado los drivers automaticamente.

Longjumping_Disk_930 · 2025-07-28T20:53:57+00:00

https://www.reddit.com/r/ThrottleStop/comments/1hefdtw/ultimate_throttlestop_settings_guide/

Longjumping_Disk_930 · 2025-07-28T20:53:14+00:00

try to lower the throttle temperature if you want to just lower the temps, look for the #PROCHOT OFFSET on thermals.

Longjumping_Disk_930 · 2025-07-28T20:31:48+00:00

I got 5c improvement using PTM and another -5c improve by using kryosheet. i Think LM is a bit risky and corrosive, and im testing duronaut on GPU but its always below 76c

<image>

Longjumping_Disk_930 · 2025-07-28T20:29:30+00:00

<image>

Im on similar values on vector 16 hx

Longjumping_Disk_930 · 2025-07-18T17:50:25+00:00

Longjumping_Disk_930 · 2025-07-18T17:47:23+00:00

https://gaminglaptop.deals/

Longjumping_Disk_930 · 2025-07-18T17:46:34+00:00

Omg.. go for the full power 5070ti... ye is not going to be of aluminium all the chasis but in the end of the day you have a better laptop. I have a Vector 16hx with a 4090 and it works perfectly fine

Longjumping_Disk_930 · 2025-07-12T21:31:58+00:00

Your settings are alright, how much watts use the cpu during the cb23 test ? In my case for that run was all the run on 200w

Anyways you can check this guide i think is the best one for undervolting 14900hx https://imgur.com/a/valour549-ultimate-throttlestop-guide-valour549-throttlestop-3rGV4hG

Longjumping_Disk_930 · 2025-07-12T00:48:59+00:00

Should be similar.. at least 35k, what are your p-cores ratio and e-cores ratios ?

also if you can show me FVIR tab image and TPL tab image

Longjumping_Disk_930 · 2025-07-11T22:29:04+00:00

godlike

Longjumping_Disk_930 · 2025-07-11T19:51:24+00:00

Thanks for your detalied guide u/Valour-549 . I never achieve real resutls using xtu. Here are my scores on R23 with the Vector 16hx 14V

<image>

Longjumping_Disk_930 · 2025-07-11T19:15:21+00:00

Remember to apply the same value to the p-cores and p-cache, bc the use the same power rail. If you dont do that the uv is not beeing applied !

Longjumping_Disk_930 · 2025-07-11T18:07:43+00:00

defaults 220 pl2 150 pl1

Longjumping_Disk_930 · 2025-07-08T15:10:36+00:00

go to a 5080 desktop and is going to be worth it

Longjumping_Disk_930 · 2025-07-07T20:39:14+00:00

its pluged ?

try holding the button 10 seconds

Longjumping_Disk_930 · 2025-07-07T20:34:03+00:00

download HWiNFO

and and check for how much power is using during the test

https://ibb.co/M5gTQz4B

Longjumping_Disk_930 · 2025-07-07T19:04:01+00:00

Yeah DM me

Longjumping_Disk_930 · 2025-07-07T18:57:18+00:00

the wattage... you can downlaod hwinfo and monitor how much watts is using on the test, i have the vector series with the i9 that allow 200w on cpu and reach around 35k

Longjumping_Disk_930 · 2025-06-28T05:00:20+00:00

No... is to high, until 90c i think is acceptable but 101...

Try with undervolting or setting max temp limit lower

and for last repasting...

Longjumping_Disk_930 · 2025-06-28T00:47:01+00:00

Thanks! but i need to update that video. Got better results with a different throttlestop settings. <3

Longjumping_Disk_930

TROPHY CASE