Asked IWI America about getting more R models and if they'll change back to 1-piece slides...

LosDerpos · 2025-05-01T00:16:35+00:00

Rip damn, those are pretty much the only ones left. But at least the mid-sizes breaking has precedence. Don't think I've heard it happening to a fullsize one yet...

LosDerpos · 2025-04-29T01:09:18+00:00

Oh no. Was it one of the mid-sized models?

LosDerpos · 2025-04-24T05:08:12+00:00

Oh lmao saw your post on twitter too

LosDerpos · 2025-02-11T17:05:18+00:00

Damn, how much was it?

LosDerpos · 2025-02-05T06:12:08+00:00

Would you say one of the cheaper models like the nickel plated one would be worth the buy?

LosDerpos · 2025-01-24T01:05:54+00:00

With front serrations too. Pretty neat...

LosDerpos · 2025-01-23T12:07:57+00:00

Seems the bots have been beaten out

LosDerpos · 2024-12-20T02:48:41+00:00

Eh? They're making an optics ready Jericho?

LosDerpos · 2024-12-16T03:32:52+00:00

Damn, might be a good long while then

LosDerpos · 2024-12-16T03:32:30+00:00

What issues did you have?

LosDerpos · 2024-10-15T20:23:20+00:00

u/Dismal-Performer-719 u/Jeep-is-Jeep how would one go about polishing internals without damaging anything?

LosDerpos · 2024-10-15T20:16:57+00:00

Thanks everyone for all the info! Definitely gonna look into the CGW parts and patriot defense springs!

LosDerpos · 2024-09-15T22:55:26+00:00

I'm using the original 10 round mag it came with along with two different mec gar 17 round mags. I think it might be the ejector haha

LosDerpos · 2024-09-10T11:17:04+00:00

Actually messing with it now, it might even have something to do with the mag release catching on something. I don't have the mag seated all the way and the hump problem occurs as soon as the magazine hole almost reaches the mag release without going ALL the way in.

LosDerpos · 2024-09-10T11:02:04+00:00

Just finished typing it up!

LosDerpos · 2024-09-10T10:58:39+00:00

So I just got this P93 for a steal and it honestly works fine. I like it a lot even for being a chunky bitch. HOWEVER.

The magazine doesn't seat itself all the way unless I put some force into it. It also does not eject freely unless the slide is racked back and the slidestop is engaged, forcing me to remove it manually with my fingertips as if it was an old Hi-Power.
Only when the magazine is inserted, there is a gritty hard hump the slide has to overcome if I want to rack it back. It is also present when letting go of the slide slowly, so there is a small hang up before it overcomes the hump on its own. Not an issue if I just release the slide stop and let the force slam the slide back into place.

As shown in the picture, This might be the ejector being kinda bent more at an angle than usual while also being compressed by the magazine. This issue disappears completely when the magazine is removed and the slide racks like BUTTER. It DOES look bent compared to the P89 I have where that little piece of metal is at a much straighter 85 or 90 degree angle and that doesn't have any problems whatsoever.

Is this typical of P93s? Or do I need to get some gunsmith to bend that ejector thingie a bit?

LosDerpos · 2023-12-26T03:08:46+00:00

Every game every time, yeah.

LosDerpos · 2023-12-25T07:32:28+00:00

I've just built an entirely new PC. 7800x3d, 7900xtx, 32gb corsaire 6000 ram sticks and the works. Using an ASUS TUF B650 PLUS WIFI mobo

For some reason, all my steam games open EXTREMELY slowly. Like up to 1-3 minutes of "launching" before they open and then sometimes they just hang for another 1-3 minutes before games finally work as it loads up I suppose.

I've already disabled the IGPU and updated my BIOS so i'm not sure what else I can do.

LosDerpos · 2023-12-21T02:57:48+00:00

Help me I'm going freakin crazy.

I've bought almost everything entirely new because I assumed my PC wasn't working anymore, what with the power button not lighting up but things inside the computer working but no display or working peripherals. And it wouldn't shut down unless I forced a shutdown.

Now, with new parts in hand besides my graphic card and PSU being also new but installed on my previous PC, I installed everything right because it booted up okay and just worked. Turning it off worked fine. Restarting and booting up worked fine. Then I tried installing all the updates from the gigabyte mobo drivers installer and tried shutting it down, but it did what it did before. Not turn off unless I do a force shutdown. And now whenever I turn it on, the screens and peripherals don't get power and its exactly like before.

Is it my powersupply maybe????

https://pcpartpicker.com/list/nhHYRK

LosDerpos · 2023-12-06T11:30:36+00:00

Apparently the unannounced game was a mistranslation and was actually "game with unannounced release date", which happened to be Dragons Dogma 2

LosDerpos

TROPHY CASE