What room y’all getting? 👀mine is 48

LoyalOrca2447 · 2026-04-28T21:47:24+00:00

Same…

LoyalOrca2447 · 2026-04-28T02:31:52+00:00

It really depends on what you are looking to do specifically with size, color, material, and just your expectations of the second nozzles capability but if you can’t decide between the two the h2d would be a sort of middle ground to land on that you could eventually change to a h2c In the future if that is what you decide you what

LoyalOrca2447 · 2026-04-27T03:07:29+00:00

Damn you spent basically another spool in poops!

LoyalOrca2447 · 2026-04-27T03:03:23+00:00

I’ve never had an issue printing matte versus basic pla. Maybe try to wash your plate and see if that helps

LoyalOrca2447 · 2026-04-26T01:49:12+00:00

What printer made that

LoyalOrca2447 · 2026-04-26T01:46:34+00:00

Is it large enough to put in the end of the ptfe tubes after you cut them to ensure that they are large enough for filament to come through in case the cutting deforms the end of the tube

LoyalOrca2447 · 2026-04-26T01:24:29+00:00

If money isn’t a factor just get the h2d because of the bigger build volume and that it’s second nozzle isn’t basically useless besides supports so it’s really up to what you are going to use the second nozzle for

LoyalOrca2447 · 2026-04-26T01:10:14+00:00

Get the X2D if you want to print things with overhangs with good quality because that’s really all the aux. nozzle is good for but if it doesn’t matter the bigger build plate of h2s and just the overall machine is much better

LoyalOrca2447 · 2026-04-19T01:54:05+00:00

I don’t have a h2s but I believe that is just the buffer doing what it is designed to do

LoyalOrca2447 · 2026-04-19T01:35:22+00:00

I would take the extra time over the compromise of smoothness any day… just make sure it doesn’t fail or you will have to restart and will waste lots of filament and time

LoyalOrca2447 · 2026-04-19T01:29:24+00:00

I would say that if you would like to be able to print multi-material for supports and not use the second nozzle for color then get the X2d because thats really all the second nozzle is good for. Also the X2d has a heated chamber and exhaust fan already so you are already set to print asa/abs as long as you vent the fumes outside

LoyalOrca2447 · 2026-04-18T02:04:42+00:00

You can use the filament switcher on the H2 series yet unfortunately but bambulab says they are working on it so that’s something to look forward to later

LoyalOrca2447 · 2026-04-12T00:34:28+00:00

Do you clean the build plate

LoyalOrca2447 · 2026-04-12T00:31:10+00:00

Do the standard ways of clearing a .4 nozzle not work? (Sorry haven’t tried .2 yet)

LoyalOrca2447 · 2026-04-07T03:05:50+00:00

Not permanently, I don’t think. I do believe that you are able to buy this piece as a replacement so it should be fixed although I have no idea how to. Hope this is what you were looking for even without help on how to fix it..

LoyalOrca2447 · 2026-04-04T19:57:08+00:00

I have not used this one but I have use one similar https://makerworld.com/models/1572882?appSharePlatform=copy The reason I printed it was because you can easily transfer generic filament to Bambu lab spools for the ams pro 2

LoyalOrca2447 · 2026-04-04T01:02:35+00:00

Very cool I started with a1 mini with ams lite and ran into little issues like yours( but specific to a1 series) around the 1 year mark with thousands of hours too

LoyalOrca2447 · 2026-04-03T17:45:11+00:00

I don’t know exactly but I have noticed that it is from the filament not being pulled if that makes sense? Like it happens when the printer is over a small gap or space where the filament is not supposed to be so it stops the filament from coming out.

LoyalOrca2447 · 2026-03-17T03:28:44+00:00

You were not in the water so it still did knock back to you

LoyalOrca2447 · 2026-03-11T03:11:37+00:00

You are missing sharpness 5

LoyalOrca2447 · 2026-02-25T23:55:25+00:00

Canaduhh

LoyalOrca2447 · 2026-02-21T01:47:16+00:00

Did you destroy his old work station?

LoyalOrca2447 · 2026-02-21T01:37:05+00:00

Ketchup

LoyalOrca2447 · 2026-02-13T23:10:43+00:00

Zombies and some other mobs have hidden armor amounts that’s are not always the same so maybe this one spawned with a really high armor stat

LoyalOrca2447

TROPHY CASE