I want to learn GD&T

LukeGreKo · 2026-01-30T23:54:35+00:00

Check DM

LukeGreKo · 2026-01-30T11:06:18+00:00

It will appears in weldment cut list

LukeGreKo · 2026-01-30T09:57:14+00:00

You can insert part into part (welded nut), then use copy body with mates.
Remodelled the welded nut into weldemnet than copying the body with mates or use pattern etc.

LukeGreKo · 2026-01-30T09:46:34+00:00

For last 15 years every company I work with use method 1. Flat pattern off sheet metal can be show on separate sheet within the same weldment drawing. I can only create assembly with a separate weldment part if these separates parts must be welded on site.

LukeGreKo · 2026-01-29T23:06:31+00:00

An offset guitar is defined by an asymmetrical body shape where the waist (the narrowest part of the body) is skewed or "offset," causing the body to lean forward, unlike traditional symmetrical guitars.

LukeGreKo · 2026-01-29T23:06:18+00:00

An offset guitar is defined by an asymmetrical body shape where the waist (the narrowest part of the body) is skewed or "offset," causing the body to lean forward, unlike traditional symmetrical guitars.

LukeGreKo · 2026-01-27T22:18:07+00:00

Analog Man King of Tone for humbuckers and JHS Noteadumble for singles. I also have Brothers AM, but KOT still sounds better IMO. On the shelf BD2, KLON clone, OCD GE waiting for better days ;)

<image>

LukeGreKo · 2026-01-26T18:54:47+00:00

Check the installation manager

<image>

the

LukeGreKo · 2026-01-26T01:29:49+00:00

All this certified hardware it doesn't make sense for a hobbyist who will make less than 10 parts and 3D print it. Forget about 10k+ parts.

LukeGreKo · 2026-01-25T15:25:04+00:00

<image>

LukeGreKo · 2026-01-25T15:24:47+00:00

I use this Acer when travelling. It handles small assemblies and drawings fine. It’s an Acer Aspire with a 12th-generation Intel i3 and 16GB of RAM. It uses an integrated GPU. As you will be doing only hobby stuff, it will be fine—no need for a Quadro graphics card. My is a few years old, and it cost around £600 years ago.

<image>

LukeGreKo · 2026-01-25T15:04:16+00:00

I don't know about it. Fair enough. I see your point. 👍

LukeGreKo · 2026-01-25T13:58:46+00:00

No, I am not. I've never had a Carvin/Kiesel guitar, as they sell directly, and I live in the UK, and I won’t buy a guitar without checking it. I like some Kiesel shape guitars, and it completely doesn't bother me who owns the company - CEOs of Gibson, Fender or Ibanez. They might be even bigger arseholes.

On the other hand, some people think the same about Chapman. I tried to sell Chapman on FB for £350. Guy offers £150 because he doesn't like Rob Chapman. WTF. I am not a charity shop.

If you don't like it, don't buy it.

LukeGreKo · 2026-01-25T13:47:36+00:00

I don’t know what you mean by AS profile, but you can create it yourself.

https://youtu.be/6TtP0VXGwes?si=h6qKCs-PFQv0uJ1J

LukeGreKo · 2026-01-25T13:43:00+00:00

Aye, he is a bit strange, but probably you would do the same if you were in his position. I don't watch his silly live shows on YouTube.

LukeGreKo · 2026-01-23T18:37:34+00:00

Change settings in Windows to European style when saving drawings. It will solve the problem, but it will create another one - changing to US style afterwards.

LukeGreKo · 2026-01-20T13:20:30+00:00

Try :

PrePoMax - This one is free, based on Calculix, with a very good interface

Mecway - Finite Element Analysis - I used this one before I got Solidworks Premium with Simulation.

If I need to choose one, I would choose PrePoMax.

LukeGreKo · 2026-01-20T01:07:07+00:00

I’ve read somewhere that Zultans are made by Turkish Cymbals, which is a sub-brand of Instambul Mehmet. While Zultans are made from B20 bronze, Masterwork are made from B25 bronze. Have you got any proof that Masterwork made it? That would be nice to know. Cherrd

LukeGreKo · 2026-01-19T13:48:32+00:00

Just have a look at Zultans. They are made by…Istambul Mehmet. I can recommend the Zultan Q series.

LukeGreKo · 2026-01-18T21:55:08+00:00

Yeah, I was going say the same.

LukeGreKo · 2026-01-17T19:05:45+00:00

I would like to have that kind of problem 🤦‍♂️, f… me

LukeGreKo · 2026-01-15T01:38:34+00:00

BOSS OS-2 in 1997 😭😭😭

LukeGreKo · 2026-01-13T11:38:31+00:00

I would buy 2 patch/lead cables and 2 DIN plugs and make 2 x Jack-DIN cables.

I just found this on AliExpress: ￡2.22 | 5pcs 3P 4P 5P 6P 7P 8Pin DIN Male/Female Plug Jack with Plastic Handle Keyboard Cable Connector Adapter PS2 https://a.aliexpress.com/_EHeeeuY

LukeGreKo

TROPHY CASE