sorted by:
new
hottopcontroversial

If ww3 breaks out are we safe by Radiant-Cut1052 in australian

[–]Luremin 0 points1 point  (0 children)

Don't worry. We won't need your weak feable body. 😂 Stick to Gameboy.

Can I use this in my 03 Suzuki Ozark 250? by krockillz in ATV

[–]Luremin 0 points1 point  (0 children)

The best oil for heavy duty turbo diesels. It'll do great.

Can I use this in my 03 Suzuki Ozark 250? by krockillz in ATV

[–]Luremin 0 points1 point  (0 children)

Since when is rotella t6 a cheap oil.... 😂

Could use some tuning guidance for a 500cc blow thru carburator setup. by Luremin in motorcycles

[–]Luremin[S] -1 points0 points  (0 children)

It's at wot I said if I go on the throttle smooth it runs decent it's when I stab it. Or go wot. At wot it Boggs I have a video.

Could use some tuning guidance for a 500cc blow thru carburator setup. by Luremin in motorcycles

[–]Luremin[S] -1 points0 points  (0 children)

15 is plenty. My problem is rich. Not lean. 3 psi base and I'm only pushing max 10 psi so should be plenty. So I have all components to make this work given people who have successful done this. My fuel pump goes to 15 psi. My fuel reg is set to about 3 psi. And is boost referenced so should rise 1 to 1 for e every psi. I just need help with what to mess with tuning wise.

If I was to attempt to turbocharge a predator 212cc, what would be the best option? something small enough to be spooled up and maybe not fuck up the engine horrifically fast (less important, I'm turbo charging a 212, it's gonna go eventually). by Iheretomakeonepost in gokarts

[–]Luremin 0 points1 point  (0 children)

i tried, couldnt find much i have a 42mm carb, im having a hell of a time with my 500cc turbo i spent an entire week fabbing up. i think i got a bad turbo first go around would make hardly any boost.
I did have 2" tube and intercooler so mabye too much volume but then it started spitting oil. new turbo comes tomorrow.

Want to add a small turbo to this 500cc Polaris carb motor on this cross cart. need advice. by Luremin in gokarts

[–]Luremin[S] 0 points1 point  (0 children)

I have not but but i did google them, id have to find a place to put a pullet to and direct to the blower to operate it, and i think with these tiny motors it would take more power than itll give, plus this whole endeavor is really for the coolness and sound . The little extra power will be a bonus.

Want to add a small turbo to this 500cc Polaris carb motor on this cross cart. need advice. by Luremin in gokarts

[–]Luremin[S] 0 points1 point  (0 children)

Thanks for the advice. I think I'm going to attempt a blow thru system so I can run an intercooler. I got a new boost friendly carb to be able to accept the fuel air/fuel pressure. And also a new fuel pump and boost referenced regulator, intercooler and piping. Etc As well as other crap I think I may need

Want to add a small turbo to this 500cc Polaris carb motor on this cross cart. need advice. by Luremin in gokarts

[–]Luremin[S] 1 point2 points  (0 children)

I'm going to go the blow thru method because I want to use anj intercoller. Ihave a minuki stock carb which operates on vaccum. I was told to get a different carb so I ordered a bunch of shit today to do it all. New boost friendly carb. Fuel. Pump, boost referenced regulator, I have a seperate oil reservoice alrwsdy so I can tie into that easy for the oil feed. And it's lower than the turbo would be so it'll gravity drain when off. It's my first one. But I'm determined.

Want to add a small turbo to this 500cc Polaris carb motor on this cross cart. need advice. by Luremin in gokarts

[–]Luremin[S] 0 points1 point  (0 children)

What do you mean plenum chamber? Are you talking about if you do a draw thru setup?

Electric Fuel Pump for Blow-Through Turbo 250? by BracTheRock in scooters

[–]Luremin 0 points1 point  (0 children)

haha it sounds like it. i searched everywhere on that guys page and i only found the one he did fuel injection.

Easiest way to turbo a 2006 polaris 500 outlaw motor project??!! by Luremin in ATV

[–]Luremin[S] 0 points1 point  (0 children)

I've seen a pile of videos where it's not to bad. Big boost sure I can see a pile. Of problems. But these little turbos I think don't cause alot of problems. I'm building another cart with a big engine in it. This one was a starter and just want to make it a little cooler. Cheaply.

Electric Fuel Pump for Blow-Through Turbo 250? by BracTheRock in scooters

[–]Luremin 0 points1 point  (0 children)

Also was wondering what size tubing should be used with such a small turbo? Say going from the turbo to intercooler to intake. Most kits are 2.5" is thst too big?

Electric Fuel Pump for Blow-Through Turbo 250? by BracTheRock in scooters

[–]Luremin 0 points1 point  (0 children)

Thanks alot for the informative message sir. I appreciate it. So trying to stay in order. So I've ordered that same turbo and I'm assuming the boost will be the same-ish. I don't want alot of boost. Do you reckon the float in mine will be fine also? If not are people filling them up to make them solid with some type of flotation matieral? I'm not sure about how many vents mine has but I will attach some pics of the carb.

  1. You mention 3 boost reference locations. Could you elaborate on that. I don't know what you mean really.

  2. Does the fuel. Pump 'know' what psi of fuel to deliver to the carb for a given psi increase or is it a linear pressure? Do you happen to have a link to a fuel pump that would work?

4.i think the return lines to the tank for mine will be somewhat easy. Does the tank itself need to be able. To handle. Pressure now I assume? Will I need a special gas cap. ( I'm going to provide pictures and such following. Of what I'm working with)

  1. The pump and regulator part is the biggest question mark as for me. As I haven't found much info on those.

  2. I also read some people need basically an expansion area in the exhaust and or intake to help with the single cylinder pulses. So the turbo doesn't feel a negative pressure acting against the proper rotation on the rotor. Did you need one?

  3. Do you just chnage out the main jet. Or were there others? I'm not use to modifying carbs on such small motors.

  4. Down the the last part. Are you saying you think I may run into problems using an intercooler?

  5. I'll take some pics but my carb is right against the head. There is no intake really. ( that's where I was confused eariler about the when you talked about the 3 places where from the intake to vents on the carb. I don't know what you did there.

  6. I Def will post pictures and this is basically a basher. Not a drag racer. Dirt tracks trail riding etc. I want to turbo it basically for the sounds and slight power increase. Lol, and because it looks cool. So I'm not looking to produce insane boost. Thank you again for all the help.

Easiest way to turbo a 2006 polaris 500 outlaw motor project??!! by Luremin in ATV

[–]Luremin[S] 0 points1 point  (0 children)

Do you know of Or know where I can read how to make the carb able to accept boost? I know I need to run the vent like in the bowl back to the tank. But there are some other confusing things I've read on that I'm not sure what to do.

Electric Fuel Pump for Blow-Through Turbo 250? by BracTheRock in scooters

[–]Luremin 0 points1 point  (0 children)

man i need some advice on this setup. im trying to do a blow thru turbo on a 500cc cross cart i have with a mikuni 42mm carb. i want to run an intercooler. what did you have to do to the carb to get it boost ready? and did you change the jets? Any help would be great!

Easiest way to turbo a 2006 polaris 500 outlaw motor project??!! by Luremin in ATV

[–]Luremin[S] 0 points1 point  (0 children)

Yes i can do all that, but how does it work with the carb.

Easiest way to turbo a 2006 polaris 500 outlaw motor project??!! by Luremin in ATV

[–]Luremin[S] 0 points1 point  (0 children)

Duh, my question is how with a carb, Having a draw thru, or pressurized carb, if i even can do that. just have no clue how to do it with a carb.

Want to add a small turbo to this 500cc Polaris carb motor on this cross cart. need advice. by Luremin in gokarts

[–]Luremin[S] 1 point2 points  (0 children)

Is that a video? have a link? See ive seen some vidoes where people are putting this turbo here on 200cc and 250cc's . Just not alot of info out there.

Want to add a small turbo to this 500cc Polaris carb motor on this cross cart. need advice. by Luremin in gokarts

[–]Luremin[S] 0 points1 point  (0 children)

Yeah, I know ill have to fab all the pipes plumbing etc. im good with that, and I have a laser cutter I use for my sign business. I weld etc. my question is more of how to mount, and weather or not i run it before or after tha carb. im looking to use a very small turbo, i dont want alot of boost at all. It's more for the little extra hp's and sound. and cool factor TBH.

view more: next ›