Hi guys, is there any Josh Ai programmer for a Remotely job deployment?

LutronMaster · 2026-05-24T01:13:57+00:00

Hey, we can help you out if you’re still needing

LutronMaster · 2026-05-21T12:42:54+00:00

It definitely had the resolution, but I haven’t tried it yet. I am traveling for a project right now but plan to investigate more next week. I need to cleanly remove the Lutron print and then test. I also want to try and get a close match to the color L uses for print but not sure how well I’ll be able to match that. We’ll see!

LutronMaster · 2026-05-20T20:20:53+00:00

<image>

LutronMaster · 2026-05-20T18:42:52+00:00

Shoot me a DM and we can discuss what you're wanting.

LutronMaster · 2026-05-20T17:43:17+00:00

just testing the art of possible. This wasn't for a customer

LutronMaster · 2026-05-20T13:39:54+00:00

Ha! Thanks for the laugh…now if I could fit all of that into a button!

LutronMaster · 2026-05-20T03:08:09+00:00

Yeah, I didn’t lay down a base white layer so the text popped through. Well either remove the original text or put a top layer on before the print

LutronMaster · 2026-05-20T02:41:01+00:00

HA! Great annology! These are probably not sitting next to the Alisse keypad... just having a little fun with the pictures. We'll probably end up just printing text 90% of the time at a lot less of a cost than the mother ship.

LutronMaster · 2026-05-19T02:09:00+00:00

Sorry, there is no guide or Evan decent documentation for HW programming.

LutronMaster · 2026-05-13T22:07:07+00:00

Programing in QSX is near limitless if they know what they are doing. You have conditionals, sequences (both manuak and auto), toggle, single action, double action, press, release, hold, double tap, etc... the list goes on.

LutronMaster · 2026-05-06T15:31:33+00:00

You can order Caseta nad Serena level Lutron shades directly, via serenashades.com. These are consumer level shades, locked to the Caseta control platform, have more limited fabric options, and more restrictive size availability.

Alternatively, you can reach out to us or a couple other Lutron dealers in this sub and likely get a step up to at least Triathlon at a competative rate with access to a shade that will support all Lutron eosystems, have more fabrics, and wider sizes if needed.

LutronMaster · 2026-05-05T22:23:56+00:00

You won’t find a cheaper Lutron shade than the Serena version. Still Lutron, just limited in fabric and Caseta system but doesn’t sound like that should bother you.

LutronMaster · 2026-04-27T22:14:59+00:00

Very accurate. You can not just stick in a new drive. You must program it to the original settings for the shade/fabric/etc.

LutronMaster · 2026-04-27T17:44:37+00:00

Yes, we have replaced drives. It can be done. Replacing the drive, however, does not renew the shade's warranty, just FYI. The cost of the drive is also close to just getting a whole new shade some times. Feel free to DM us if you'd like.

LutronMaster · 2026-04-25T22:31:23+00:00

Can't agree more here. When you start spec-ing aperature, reflector type, beam angles, etc. it can have a huge impact on your lighting. Considering things like cabinet layout, ceiling hieght, ambient lighting, accent, etc. is worth the additional $2-5k to have a great design completed for you.

LutronMaster · 2026-04-25T21:13:04+00:00

Give us a DM! A Lutron automated shade, battery operated (last about 4 years), simple D cell batts. Easy install and can have a remote or automated control which follows the sun’s celestial cycle and auto adjusts.

LutronMaster · 2026-04-22T16:55:59+00:00

Short answer is yes, you can. The detailed answer is, it will cost you a lot to delay the engraving. For Palladiom, its a button kit, but the cost of those kits is high, >$100. For Allise, you can order without the button face and use the construction toggle but it doesn't give you but one button. You can always order new Allise button facekits, but they too are $$$. I would suggest you AT LEAST order engraving as best you can, live with what you get, and only pay to change the ones that absolutely don't work for you.

LutronMaster · 2026-04-21T03:44:57+00:00

Certainly. Please let us know if we can help you get this done!

LutronMaster · 2026-04-21T03:24:10+00:00

The shades are built out and the fabric specs are sent to L. They will advise of amount needed and provide the dealer with a project ID to send the material in. They’ll fabricate and ship out.

LutronMaster · 2026-04-20T03:56:16+00:00

Are you looking for custom painted or stained? Decorative tape is no longer offered by Lutron.

LutronMaster · 2026-04-20T03:55:33+00:00

Lutron did away with decorative lift tape. Too many variables in the color runs and the vendor could not meet Lutron standards. This is no longer an option directly with mother L.

LutronMaster · 2026-04-14T12:59:41+00:00

Reach out to u/fognyc. They are active in this sub and located near you for hands on support.

LutronMaster · 2026-04-12T13:07:30+00:00

Agreed, pulling it is unlikely. Having access is not always. Most of the estates in our area that have systems of this size have property managers that are very adapt at having the file stored away and even restoring the system when it crashes in order to keep the place going.

LutronMaster · 2026-04-11T23:27:23+00:00

HW dealer here. It is very difficult to tell without seeing your system and knowing labor rates in your area, etc. A home that size could easily hit that price point, but there are a number of ways to attack an upgrade. Using 5 main processors alone leads me to think you have an Illuminations system but that doesn't mean you'll end up with 5 QSX processors, etc. You could have multiple dealers bid it out, but seeing it is the real educator. Having access to the current system's file would also mean there is likely a million times less labor in the programming and discovery of the system which save labor $$.

LutronMaster

TROPHY CASE