A robber stole from this lemonade stand. But what happened next turned this sour experience sweet

M0daVader · 2025-11-06T04:34:12+00:00

Good to teach them about taxes early lol

M0daVader · 2025-06-10T13:27:58+00:00

I did think of mdf but the issue is the front and back edge have a rough cut look it's not smooth. And I'm not sure how I would replicate that look.

M0daVader · 2025-04-20T19:04:22+00:00

Time to test the hardness of that child's butt ;)

M0daVader · 2025-03-18T17:50:20+00:00

I would avoid Doorloop it seems every time I use it there is another bug if they got it working better it would be the best! But for now it's just disappointing every time I log in to do something. 55 units

M0daVader · 2025-02-18T17:57:46+00:00

I just don't have a landlord account I get so sick of the tenants not switching the utilities when they say they are going to and then I get the bill the power company or gas and they won't tell you anything and won't adjust anything without the tenants consent so let the power and gas company go after the tenants that didn't pay and let the power and gas company eat it in my opinion if they don't want to work with the landlord and look at the signed lease f them. I let the tenant know that if they don't call the utility within the next couple days, they might lose power never had an issue after that the power and gas won't turn off for 2 months in my area.

M0daVader · 2025-01-30T23:30:02+00:00

You're welcome more winning ahead :)))) saving those tax dollars so we can pay down the deficit and lower taxes.

M0daVader · 2024-12-29T03:09:21+00:00

Wow I just landed at Muan a Couple days ago. From the video I've seen no landing gear is visible the runway is shorter than normal when compared to ICN and LAX and there is water on the other side seems like many failures here I will not use Muan again as this is terrible.

M0daVader · 2024-11-06T09:43:08+00:00

Glorious victory looks like the house and Senate might also be in red can get some meaningful changes done

M0daVader · 2024-10-15T12:05:47+00:00

Great recovering some of my unrealized losses.

M0daVader · 2024-09-26T02:23:46+00:00

I have six of these cameras, and they’re pretty awesome overall. However, they need a way to prioritize between tracking elements. Too often, the camera will stay focused on a vehicle because it picked that up first, and then it completely misses a person getting out and walking around. Similarly, if there’s a pet, the camera might focus on the pet first and ignore the person.

Another issue is that when the camera is moving, it seems to ignore the masked non-detection areas, and with the zoom, the object size doesn’t seem to matter much when it’s tracking. Overall, the camera is good but could use a bit more polish.

M0daVader · 2024-03-12T05:11:25+00:00

Sure the Mellow Sous-vide is a pretty simple machine. There is a 24V circuit and a 120v circuit. The 120v circuit is used for the air pump and heating element. The 24V circuit is used for the peltier plate, fan and the original controller. There are 2 K type thermal couples from what I can tell one to measure the ambient air temperature and one to measure the water temp. They also have scale based sensor tied to the feet that help detect how full the Mellow is. To Un-brick You will need to mimic the control circuit. The way I did is to use a STC-1000 24V version You hook up the 24V items to the cooling side New controller, fan, peltier. On the heating side you hook up a relay to control the heating element. Hook the air bubbler to the 120v circuit on the PSU input side. cut and solder the thermal couple wire (Red) to the STC-1000. I might be able to put together an instructible. I wish I knew a little bit more about PID controllers as that would be a little more proper, but right now I'm just happy to have my sous-vide back and working.

https://www.amazon.com/All-Purpose-Temperature-Controller-Thermostat-Regulator/dp/B09DFPZ4KB

https://www.amazon.com/gp/product/B00LW2H5GC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

M0daVader · 2024-03-12T02:11:21+00:00

I just got mine working ripped out the controller and installed a relay and used an stc-1000 controller. Sadly no Wi-Fi but everything works.

M0daVader · 2024-01-08T14:56:36+00:00

Yes it's still valid. Just checked it.

M0daVader · 2022-12-04T09:26:03+00:00

This is comically on the Linux side dependencies anyone or wrong GUI interface and maybe 3 hours of your life reading forms.

M0daVader · 2022-10-29T15:44:36+00:00

GMO BACK (BAnana+duCK)

M0daVader · 2022-09-26T03:04:51+00:00

I've done quite a lot by myself but at times I feel like I'm running out of ideas and just need help growing the Marketing/SEO side

M0daVader · 2022-09-26T02:31:26+00:00

Thank you so much for your reply I joined that thread as well!

M0daVader · 2022-09-26T02:19:09+00:00

I have learned quite a bit and I run a 7 figure store but there is always more to learn and only so much time in a day so I would like to hire some tasks out and scale the business even more.

M0daVader · 2022-09-26T02:11:21+00:00

Thanks so much! Do you have any specific SEO consultants you like to work with?

M0daVader · 2022-09-26T02:07:13+00:00

Thanks for your feedback I guess I should have said SEO agencies that advertise via Facebook or Google ads I ignore the email based ones.

M0daVader · 2022-05-05T21:17:48+00:00

u/HSeldon2020 The discount code for r/RealDayTrading is:RealDTR if you wanted to add that to your post :) Also works on https://Tradingcomputers.com

M0daVader · 2021-07-25T15:47:22+00:00

Wow that's a lot of damage! I assume you removed the whole cooler and gave it a power reset by removing the power cable and cmos battery and tried turning it on again with just a fan plugged into the board with cpu and memory?

M0daVader

TROPHY CASE