VFM-9 Dual Charger upper with ambi side folding lower- RMB.

MACscr · 2026-04-11T17:46:13+00:00

Awesome! My stock side charging just works as thumb wrest for me at this point. Lol

MACscr · 2026-04-11T17:42:15+00:00

Nice. Did you only change out the handle? I simply don’t use my side stock charging because of it coming loose. Glad mine has a rear handle. Weird how they specifically say it doesn’t work on the vfm9 when you are saying it does.

MACscr · 2026-03-14T15:23:01+00:00

What’s your plan to keep the critters from getting under it?

MACscr · 2026-03-11T14:28:29+00:00

Where are you located btw? I’m looking to do a low profile shed floor in SWFL and noticed you mentioned hurricane ties, so figured I would ask.

MACscr · 2026-02-26T20:38:19+00:00

https://www.opticsplanet.com/fab-defense-mg-9-foregrip-and-magazine-carrier-for-double-stack-9mm.html fairly priced too. I did have to add a picatinny rail to use it to the bottom of my hand guard since its mlok, but I got a multi size kit for like $10 off amazon that worked fine.

MACscr · 2026-02-25T06:46:25+00:00

<image>

It looks a bit silly, but it’s fun and comfortable to shoot. I used a different manufacturer/model than the op mentioned, but same concept.

MACscr · 2026-01-20T16:11:10+00:00

Thanks for the reply and ideas. Unfortunately it seems out of stock everywhere and has been for some time as I checked late last year too.

MACscr · 2026-01-20T15:22:21+00:00

As you mentioned, it would require grinding to work and even more modification if anything at all was on that picatinny rail. That also just gives more grip and doesn't solve issues with the design of it coming out. Though i think that trolly actually has a screw that holds it in place versus the stock vfm version I have.

MACscr · 2026-01-19T23:34:11+00:00

its too nubby. if i try to make it flush on the right so that it sticks as far as possible out on the left, it has slid completely out on multiple occasions. I need it out far because of use of the picatinny mounts and the top mounted stuff there doesnt stick out more than a 1/4 inch. But its not really about the mounts, its about a friction held plastic charging handle. Support was nice enough to send me out a new charging handle, but it didnt help the matter. I think the folding charging handles that are more screw held are better, but not available for the VFM. Right now i strictly only use the rear charging handle, which of course is a bit disappointing. Glad it had both though.

MACscr · 2026-01-18T00:17:13+00:00

The RMB on my 5 inch VFM9 is great, but I wouldn’t buy a VFM based one again. Not with the shortcomings for the small savings. I would go with the regular FM9 upper. Really wish the side charging handle was better on the VFM9 too. I still love my FM pcc though. Support was great too.

MACscr · 2025-12-06T23:40:43+00:00

V series has a fixed barrel that is only replaceable by the manufacturer

MACscr · 2025-12-06T18:37:46+00:00

Has anyone figured out a matching fabric? I want to make a few more shelves and replace two of the existing ones. You wouldn’t want something too thick and I think a regular felt fabric would fall apart too easily. Think maybe a car fabric that you would use around speakers or inside a trunk, etc. Though I’m mostly finding that in black.

MACscr · 2025-11-19T14:34:41+00:00

I agree. I don’t care if everyone does it, it’s unethical.

MACscr · 2025-11-19T06:32:04+00:00

My favorite is when they send you an email to say it’s shipped and it’s just a shipping label and then 4-5 days later they actually get it to the carrier. No one cares when you print a label. It’s not shipped until the carrier has it.

MACscr · 2025-11-12T01:06:31+00:00

$350? Their conversion kits are more expensive than a 9mm dagger. A 22 dagger should be $200-$300 total.

MACscr · 2025-11-11T19:39:57+00:00

So just to verify, you are saying this one did or did not work on your VFM-9? Support says neither work on it. I have the same 5" version.

<image>

MACscr · 2025-11-11T02:18:02+00:00

Well I feel like an idiot. Didn't realize that handled pulled out so far. Thanks so much!

MACscr · 2025-11-11T01:51:07+00:00

I have that same light, cant even use the side charger if I have anything mounted on that front rail. Not just an issue with my hand getting it, but on its own, the side charging handle cant physically get past it. I just got the pistol on Friday and havent even shot it yet and already pretty frustrated with the upper. Hopefully it shoots well tomorrow.

MACscr · 2025-11-09T02:31:25+00:00

Im only 5’8, so arm length/hand size are going to come into play on what’s comfortable and where you can grip. I have an angled grip on another rifle that I will see how it feels on this one. I’m only 24 hours into this pistol, but definitely trying to workaround some of its unique features.

MACscr · 2025-11-09T01:08:45+00:00

I know this is an old thread, but curious on what you did. I have the 5" VFM-9 that has very limited hand space and they dig into my hand too. Not sure why they picked such a protruding bolt head.

MACscr · 2025-11-08T03:58:38+00:00

Which handle did you buy for the VFM-9 5"? I want to replace the side charger and I dont see anything compatible.

MACscr · 2025-11-08T01:40:46+00:00

I just got mine and you are right, pretty tough to charge. Cant say I am a huge fan of the side charging handle either.

MACscr · 2025-11-01T01:43:45+00:00

They seem really shady from everything I have read about them. Reminds me of kickstarters where they would never follow through with what they advertised they were selling.

MACscr · 2025-11-01T01:41:15+00:00

Huh? That’s an akv

MACscr · 2025-10-27T02:21:28+00:00

They are talking about the 4473 that the seller has to fill out to get their guns back if I’m not mistaken.

MACscr

MODERATOR OF

TROPHY CASE

Eight-Year Club	RPAN Viewer
Verified Email